This is the command sslclient that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
sslclient - an SSL client
SYNOPSIS
sslclient [dacsoptions[1]] [-caf | --ca_cert_file filename]
[-cad | --ca_cert_dir dirname]
[-ccf | --cert_chain_file filename]
[-C | --ciphers cipherstring]
[[-dvp] | [--default_verify_paths] cipherstring]
[-h | --help] [-kf | --key_file filename]
[-kft | --key_file_type pem | asn1]
[-p | -sp | [--server_port] portnum]
[-r | --random filename]
[[-sm | --server_match regex ]...]
[-vd | --verify_depth depth]
[-vt | --verify_type none | peer] [--] server [:port ]
DESCRIPTION
This program is part of the DACS suite. It can be used with the usual DACS command line
options (dacsoptions[1]), provided they all appear before the program-specific flags (note
that the -un flag can be used to suppress configuration file processing). sslclient is
also used by the dacshttp(1)[2] command and by requests generated internally by DACS
components.
The sslclient utility acts as an SSL client. After establishing a bidirectional SSL
connection with an SSL server, it forwards its standard input to the SSL server and writes
data produced by the SSL server to sslclient's standard output.
sslclient connects to server (a domain name or IP address). If a port number suffix is
given (port), it is used; otherwise, if a port number is specified as a separate command
line argument (--server_port portnum), that is used; failing that, the default SSL port
for https (443)[3] is used.
The program reads from its standard input and the server asynchronously (using
non-blocking I/O). Note that the server side might need to see end-of-file on its input
before its output is returned to sslclient.
This program's underlying SSL functionality is provided by OpenSSL[4].
OPTIONS
sslclient recognizes these options:
-caf filename
--ca_cert_file filename
This identifies filename as a file of CA certificates in PEM format. This is the
CAfile argument to the OpenSSL[4] SSL_CTX_load_verify_locations()[5] function. It is
similar to mod_ssl's[6] SSLCACertificateFile[7] directive, except that it is used to
verify the server's SSL certificate.
-cad dirname
--ca_cert_dir dirname
This identifies dirname as a directory containing CA certificates in PEM format, one
certificate per file. This is the CApath argument to the OpenSSL[4]
SSL_CTX_load_verify_locations()[5] function. It is similar to mod_ssl's[6]
SSLCACertificatePath[8] directive, except that it is used to verify the server's
certificate.
-ccf filename
--cert_chain_file filename
This causes the client certificate chain to be loaded from filename, a file containing
certificates in PEM format. This is the file argument to the OpenSSL[4]
SSL_CTX_use_certificate_chain_file()[9] function. It is similar to mod_ssl's[6]
SSLCACertificateChainFile[10] directive, except that it is used for the client's
chain.
Tip
If you want the client certificate to be sent you must also specify the -kf flag.
-C cipherstring
--ciphers cipherstring
This sets the list of ciphers to be used to cipherstring. This is the str argument to
the OpenSSL[4] SSL_CTX_set_cipher_list()[11] function. It is similar to mod_ssl's[6]
SSLCipherSuite[12] directive.
-dvp
--default_verify_paths
This flag tells sslclient to use default locations for finding CA certificates. It
results in a call to the OpenSSL[4] SSL_CTX_set_default_verify_paths() function.
-h
--help
Print a usage synopsis.
-kf filename
--key_file filename
This sets sslclient's private key to the first private key found in filename. This is
the file argument to the OpenSSL[4] SSL_CTX_usePrivateKey_file() function. The default
private key file type is PEM. If the key has been encrypted, the program will prompt
for the passphrase.
-kft type
--key_file_type type
The private key file type is set to type, which must be either pem or asn1 (case
insensitive). The default private key file type is PEM.
-p portnum
-sp portnum
--server_port portnum
Unless appended to the server argument, portnum is the port number to use, overriding
the default port (443).
-r filename
--random filename
Seed material for the PRNG is read from filename. This is the filename argument to the
OpenSSL[4] RAND_load_file() function.
-sm regex
--server_match regex
This argument, which may be repeated, specifies a constraint on the server's identity
by matching an attribute value in the server's certificate against regex. These tests
are made immediately after an SSL connection is established. Each regex is an IEEE Std
1003.2 ("POSIX.2") regular expression with extended expressions and case insensitivity
(REG_EXTENDED | REG_ICASE). See below[13] for the matching algorithm.
-vd depth
--verify_depth depth
This sets the maximum depth for certificate chain verification to depth. This is the
depth argument to the OpenSSL[4] SSL_CTX_set_verify_depth() function.
-vt type
--verify_type type
This sets the verification mode to type, which must be either none or peer (case
insensitive). This is the mode argument to the OpenSSL[4] SSL_CTX_set_verify()
function.
--
This argument explicitly marks the end of the flags.
The DACS -v (or --verbose) flag causes the program to show some of the server's SSL
certificate, print feedback about regular expression matching, and so on. If sslclient is
not doing what you expect, try using this flag.
Server Identity Verification
If the server presents a valid SSL (X.509) certificate, a set of checks is applied to it
to help ensure that sslclient is communicating with the intended entity. Verification is
successful and checking is terminated as soon as any test is successful. If no test
succeeds, the program terminates immediately.
Tip
You can use a command like the following one to display an X.509 certificate to stdout
in text form:
% openssl x509 -noout -text < cert.crt
Here, cert.crt is the certificate to display.
The server certificate's subjectAltName extension fields have the format
field-name:field-value. For each such field, tests are made in the following sequence:
1. the entire field is matched against each of the regular expressions given on the
command line.
2. if the previous test failed and field-name is "DNS" (exact match), it is compared case
insensitively to the server's name (as given on the command line).
3. if the previous test failed and if the field-name is "IP Address" (exact match), it is
compared to the server's name (exact match), which is assumed to be an IP address (as
given on the command line).
If the above procedure is unsuccessful and the server certificate's commonName attribute
value is available, it is matched against each of the regular expressions given on the
command line.
EXAMPLES
The following command line attempts to connect to port 443 at example.com and prints to
stdout the server's response to a request for the home page:
% perl -e 'printf "GET / HTTP/1.0\n\n";' | sslclient example.com:443
DIAGNOSTICS
When used with DACS logging configured, messages are directed to a log file, otherwise
error messages and verbose output are written to stderr. The program exits 0 if everything
was fine, 1 if an error occurred.
NOTES
A wrapper mode of operation might be useful.
It would also be useful to have a mode where it listens for an SSL connection for input
(rather than its standard input) and then relays data over that connection to a specified
server, possibly but not necessarily via SSL. This mode might run on a firewall host to
forward an approved incoming SSL connection (presumably authenticated by a client
certificate, and possibly by a DACS ruleset) to a service running on an interior host, for
instance.
Use sslclient online using onworks.net services