This is the command tracemerge that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
tracemerge - Merge one (or more) traces together
SYNOPSIS
tracemerge [ -i [ interfaces_per_input ] | --set-interface [ interfaces_per_input ] ] [ -u
| --unique-packets ] [ -z | --compress-level <level> ] [ -Z | --compress-type <method> ]
outputuri inputuri...
DESCRPTION
tracemerge merges two or more traces together, keeping packets in order.
-i[interfaces_per_input]
--set-interface[interfaces_per_input]
set the interface ("direction") for each input to be unique. The optional
inputs_per_interface parameter is how many inputs to reserve for each trace, and
defaults to 1. Thus if you have two traces with two interfaces (in/out), and
interfaces_per_input is set to 2, then tracemerge will have the first interface of
the first input will be 0, the second interface of the first input will be 1, the
first interface of the second input will be 2, and the second interface of the
second input will be 3.
Beware that erf only supports 4 interfaces, and pcap only supports 2. Limitations
apply based on the input trace format (not the output trace format)
-u
--unique-packets
Ignore duplicate packets with identical timestamps.
-zlevel
--compress-levellevel
Sets the amount of compression performed on the output file. This value can range
from 0 (no compression) to 9 (maximum compression). Higher compression levels
require more CPU to compress data. Defaults to 0.
-Zmethod
--compress-typemethod
Describes the compression algorithm to be used when writing the output trace.
Possible methods are "gzip", "bzip2", "lzo", "xz" and "none". Defaults to "none".
LINKS
More details about tracemerge (and libtrace) can be found at
http://www.wand.net.nz/trac/libtrace/wiki/UserDocumentation
Use tracemerge online using onworks.net services