दस्तावेज़ीकरणD.12. /etc/rc.d/init.d/console
# / बिन / श
############################################# #####################
# Begin console
#
# / बिन / श
############################################# #####################
# Begin console
#
# Description : Sets keymap and screen font
#
# लेखक: जेरार्ड बीकमैन्स - [ईमेल संरक्षित]
# Alexander E. Patrakov
# डीजे लुकास - [ईमेल संरक्षित]
# अद्यतन : ब्रूस डब्स - [ईमेल संरक्षित]
#
# संस्करण: एलएफएस 7.0
#
############################################# #####################
### BEGIN INIT जानकारी
# Provides: console
# आवश्यक-शुरू:
# Should-Start: $local_fs
# आवश्यक-रोकें:
# बंद कर देना चाहिए:
# डिफ़ॉल्ट-प्रारंभ: एस
# डिफ़ॉल्ट-रोकें:
# Short-Description: Sets up a localised console.
# Description: Sets up fonts and language settings for the user's
# local as defined by /etc/sysconfig/console.
# एक्स-एलएफएस-प्रदत्त-द्वारा: एलएफएस
### END INIT जानकारी
. /lib/lsb/init-functions
# Native English speakers probably don't have /etc/sysconfig/console at all [ -r /etc/sysconfig/console ] && . /etc/sysconfig/console
क्या सच है()
{
[ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ]
}
failed=0
प्रारंभ में मामला "${1}")
# See if we need to do anything
if [ -z "${KEYMAP}" ] && [ -z "${KEYMAP_CORRECTIONS}" ] && [ -z "${FONT}" ] && [ -z "${LEGACY_CHARSET}" ] &&
! is_true "${UNICODE}"; then exit 0
fi
# There should be no bogus failures below this line! log_info_msg "Setting up Linux console..."
# Figure out if a framebuffer console is used
[ -d /sys/class/graphics/fb0 ] && use_fb=1 || use_fb=0
# Figure out the command to set the console into the
# desired mode
is_true "${UNICODE}" &&
MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" || MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a"
# On framebuffer consoles, font has to be set for each vt in
# UTF-8 mode. This doesn't hurt in non-UTF-8 mode also.
! is_true "${use_fb}" || [ -z "${FONT}" ] || MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}"
# Apply that command to all consoles mentioned in
# /etc/inittab. Important: in the UTF-8 mode this should
# happen before setfont, otherwise a kernel bug will
# show up and the unicode map of the font will not be
# used.
forTTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab | grep -o '\btty[[:digit:]]*\b'`
do
openvt -f -w -c ${TTY#tty} -- \
/bin/sh -c "${MODE_COMMAND}" || failed=1
किया
# Set the font (if not already set above) and the keymap
[ "${use_fb}" == "1" ] || [ -z "${FONT}" ] || setfont $FONT || failed=1
[ -z "${KEYMAP}" ] ||
loadkeys ${KEYMAP} >/dev/null 2>&1 || failed=1
[ -z "${KEYMAP_CORRECTIONS}" ] ||
loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 || failed=1
# Convert the keymap from $LEGACY_CHARSET to UTF-8 [ -z "$LEGACY_CHARSET" ] ||
dumpkeys -c "$LEGACY_CHARSET" | loadkeys -u >/dev/null 2>&1 || failed=1
# If any of the commands above failed, the trap at the
# top would set $failed to 1 ( exit $failed ) evaluate_retval
बाहर निकलें $असफल
;;
*)
esac
इको "उपयोग: ${0} {प्रारंभ}" निकास 1
;;
# End console
