This is the Linux app named libnexstar to run in Linux online whose latest release can be downloaded as libnexstar-0.15.tar.gz. It can be run online in the free hosting provider OnWorks for workstations.
Download and run online this app named libnexstar to run in Linux online with OnWorks for free.
Follow these instructions in order to run this app:
- 1. Downloaded this application in your PC.
- 2. Enter in our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 3. Upload this application in such filemanager.
- 4. Start the OnWorks Linux online or Windows online emulator or MACOS online emulator from this website.
- 5. From the OnWorks Linux OS you have just started, goto our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 6. Download the application, install it and run it.
libnexstar to run in Linux online
Ad
DESCRIPTION
This library implements the serial commands supported by the CelestronNexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies
to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar
SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc.
SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the
corresponding Orion mounts.
Communication to the hand control is 9600 bits/sec, no parity and one
stop bit via the RS-232 port on the base of the hand control.
Communication can be established over TCP/IP if nexbridge is running
on the computer connected to the telescope.
To control network based telescopes nexbridge must be used on the remote site.
https://sourceforge.net/projects/nexbridge/
Features
- Can control network exported mounts with nexbridge
- Full support for SkyWatcher /Orion mounts (HC firmware > X.38.06)
- All published NexStar commands are supported
- Some AUX commands are supported since v.0.08
- Record / Play PEC data
- Download / uplod PEC data from/to the mount
- Set / Get mount backlash settings
- Set / Get autoguide rate
- Both Equatorial and Alt/Az mounts are supported
- Works with Linux, Mac OS X, FreeBSD, Solaris
Programming Language
C
This is an application that can also be fetched from https://sourceforge.net/projects/libnexstar/. It has been hosted in OnWorks in order to be run online in an easiest way from one of our free Operative Systems.