EnglishFrenchSpanish

Ad


OnWorks favicon

cvs - Online in the Cloud

Run cvs in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command cvs that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


cvs - Concurrent Versions System

SYNOPSIS


cvs [ cvs_options ]
cvs_command [ command_options ] [ command_args ]

NOTE


This manpage is a summary of some of the features of cvs. It is auto-generated from an
appendix of the CVS manual. For more in-depth documentation, please consult the
Cederqvist manual (via the cvs(GNU) link in the MirBSD online (HTML) manual pages, the
info CVS command or otherwise, as described in the SEE ALSO section of this manpage).
Cross-references in this man page refer to nodes in the same.

CVS commands


Guide to CVS commands
This appendix describes the overall structure of cvs commands, and describes some commands
in detail (others are described elsewhere; for a quick reference to cvs commands, see node
'Invoking CVS' in the CVS manual).

Structure


Overall structure of CVS commands
The overall format of all cvs commands is:

cvs [ cvs_options ] cvs_command [ command_options ] [ command_args ]

cvs

The name of the cvs program.

cvs_options

Some options that affect all sub-commands of cvs. These are described below.

cvs_command

One of several different sub-commands. Some of the commands have aliases that can be
used instead; those aliases are noted in the reference manual for that command. There
are only two situations where you may omit cvs_command: cvs -H elicits a list of
available commands, and cvs -v displays version information on cvs itself.

command_options

Options that are specific for the command.

command_args

Arguments to the commands.

There is unfortunately some confusion between cvs_options and command_options. When
given as a cvs_option, some options only affect some of the commands. When given as a
command_option it may have a different meaning, and be accepted by more commands. In
other words, do not take the above categorization too seriously. Look at the
documentation instead.

Exit status


CVS's exit status
cvs can indicate to the calling environment whether it succeeded or failed by setting its
exit status. The exact way of testing the exit status will vary from one operating system
to another. For example in a unix shell script the $? variable will be 0 if the last
command returned a successful exit status, or greater than 0 if the exit status indicated
failure.

If cvs is successful, it returns a successful status; if there is an error, it prints an
error message and returns a failure status. The one exception to this is the cvs diff
command. It will return a successful status if it found no differences, or a failure
status if there were differences or if there was an error. Because this behavior provides
no good way to detect errors, in the future it is possible that cvs diff will be changed
to behave like the other cvs commands.

~/.cvsrc


Default options and the ~/.cvsrc file
There are some command_options that are used so often that you might have set up an alias
or some other means to make sure you always specify that option. One example (the one
that drove the implementation of the .cvsrc support, actually) is that many people find
the default output of the diff command to be very hard to read, and that either context
diffs or unidiffs are much easier to understand.

The ~/.cvsrc file is a way that you can add default options to cvs_commands within cvs,
instead of relying on aliases or other shell scripts.

The format of the ~/.cvsrc file is simple. The file is searched for a line that begins
with the same name as the cvs_command being executed. If a match is found, then the
remainder of the line is split up (at whitespace characters) into separate options and
added to the command arguments before any options from the command line.

If a command has two names (e.g., checkout and co), the official name, not necessarily the
one used on the command line, will be used to match against the file. So if this is the
contents of the user's ~/.cvsrc file:

log -N
diff -uN
rdiff -u
update -Pd
checkout -P
release -d

the command cvs checkout foo would have the -P option added to the arguments, as well as
cvs co foo.

With the example file above, the output from cvs diff foobar will be in unidiff format.
cvs diff -c foobar will provide context diffs, as usual. Getting "old" format diffs would
be slightly more complicated, because diff doesn't have an option to specify use of the
"old" format, so you would need cvs -f diff foobar.

In place of the command name you can use cvs to specify global options (see node 'Global
options' in the CVS manual). For example the following line in .cvsrc

cvs -z6

causes cvs to use compression level 6.

Global options


The available cvs_options (that are given to the left of cvs_command) are:

--allow-root=rootdir

May be invoked multiple times to specify one legal cvsroot directory with each
invocation. Also causes CVS to preparse the configuration file for each specified root,
which can be useful when configuring write proxies, See node 'Password authentication
server' in the CVS manual & node 'Write proxies' in the CVS manual.

-a

Authenticate all communication between the client and the server. Only has an effect on
the cvs client. As of this writing, this is only implemented when using a GSSAPI
connection (see node 'GSSAPI authenticated' in the CVS manual). Authentication prevents
certain sorts of attacks involving hijacking the active tcp connection. Enabling
authentication does not enable encryption.

-b bindir

In cvs 1.9.18 and older, this specified that rcs programs are in the bindir directory.
Current versions of cvs do not run rcs programs; for compatibility this option is
accepted, but it does nothing.

-T tempdir

Use tempdir as the directory where temporary files are located.

The cvs client and server store temporary files in a temporary directory. The path to
this temporary directory is set via, in order of precedence:

· The argument to the global -T option.

· The value set for TmpDir in the config file (server only - see node 'config' in the
CVS manual).

· The contents of the $TMPDIR environment variable (%TMPDIR% on Windows - see node
'Environment variables' in the CVS manual).

· /tmp

Temporary directories should always be specified as an absolute pathname. When
running a CVS client, -T affects only the local process; specifying -T for the client
has no effect on the server and vice versa.

-d cvs_root_directory

Use cvs_root_directory as the root directory pathname of the repository. Overrides the
setting of the $CVSROOT environment variable. See node 'Repository' in the CVS manual.

-e editor

Use editor to enter revision log information. Overrides the setting of the $CVSEDITOR
and $EDITOR environment variables. For more information, see node 'Committing your
changes' in the CVS manual.

-f

Do not read the ~/.cvsrc file. This option is most often used because of the
non-orthogonality of the cvs option set. For example, the cvs log option -N (turn off
display of tag names) does not have a corresponding option to turn the display on. So
if you have -N in the ~/.cvsrc entry for log, you may need to use -f to show the tag
names.

-g

Forges group-writable permissions on files in the working copy. This option is
typically used when you have multiple users sharing a single checked out source tree,
allowing them to operate their shells with a less dangerous umask at the expense of cvs
security. To use this feature, create a directory to hold the checked-out source tree,
set it to a private group, and set up the directory such that files created under it
inherit the gid of the directory. On BSD systems, this occurs automatically. On SYSV
systems and GNU/Linux, the sgid bit must be set on the directory for this. The users
who are to share the checked out tree must be placed in that group which owns the
directory.

Note that the sharing of a single checked-out source tree is very different from giving
several users access to a common cvs repository. Access to a common cvs repository
already maintains shared group-write permissions and does not require this option.

Due to the security implications, setting this option globally in your .cvsrc file is
strongly discouraged; if you must, ensure all source checkouts are "firewalled" within a
private group or a private mode 0700 directory.

This option is a MidnightBSD extension merged into MirBSD cvs.

-H

--help

Display usage information about the specified cvs_command (but do not actually execute
the command). If you don't specify a command name, cvs -H displays overall help for
cvs, including a list of other help options.

-R

Turns on read-only repository mode. This allows one to check out from a read-only
repository, such as within an anoncvs server, or from a cd-rom repository.

Same effect as if the CVSREADONLYFS environment variable is set. Using -R can also
considerably speed up checkouts over NFS.

-n

Do not change any files. Attempt to execute the cvs_command, but only to issue reports;
do not remove, update, or merge any existing files, or create any new files.

Note that cvs will not necessarily produce exactly the same output as without -n. In
some cases the output will be the same, but in other cases cvs will skip some of the
processing that would have been required to produce the exact same output.

-Q

Cause the command to be really quiet; the command will only generate output for serious
problems.

-q

Cause the command to be somewhat quiet; informational messages, such as reports of
recursion through subdirectories, are suppressed.

-r

Make new working files read-only. Same effect as if the $CVSREAD environment variable
is set (see node 'Environment variables' in the CVS manual). The default is to make
working files writable, unless watches are on (see node 'Watches' in the CVS manual).

-s variable=value

Set a user variable (see node 'Variables' in the CVS manual).

-t

Trace program execution; display messages showing the steps of cvs activity.
Particularly useful with -n to explore the potential impact of an unfamiliar command.

-v

--version

Display version and copyright information for cvs.

-w

Make new working files read-write. Overrides the setting of the $CVSREAD environment
variable. Files are created read-write by default, unless $CVSREAD is set or -r is
given.

-x

Encrypt all communication between the client and the server. Only has an effect on the
cvs client. As of this writing, this is only implemented when using a GSSAPI connection
(see node 'GSSAPI authenticated' in the CVS manual) or a Kerberos connection (see node
'Kerberos authenticated' in the CVS manual). Enabling encryption implies that message
traffic is also authenticated. Encryption support is not available by default; it must
be enabled using a special configure option, --enable-encryption, when you build cvs.

-z level

Request compression level for network traffic. cvs interprets level identically to the
gzip program. Valid levels are 1 (high speed, low compression) to 9 (low speed, high
compression), or 0 to disable compression (the default). Data sent to the server will
be compressed at the requested level and the client will request the server use the same
compression level for data returned. The server will use the closest level allowed by
the server administrator to compress returned data. This option only has an effect when
passed to the cvs client.

Common options


Common command options
This section describes the command_options that are available across several cvs commands.
These options are always given to the right of cvs_command. Not all commands support all
of these options; each option is only supported for commands where it makes sense.
However, when a command has one of these options you can almost always count on the same
behavior of the option as in other commands. (Other command options, which are listed
with the individual commands, may have different behavior from one cvs command to the
other).

Note: the history command is an exception; it supports many options that conflict even
with these standard options.

-D date_spec

Use the most recent revision no later than date_spec. date_spec is a single argument, a
date description specifying a date in the past.

The specification is sticky when you use it to make a private copy of a source file;
that is, when you get a working file using -D, cvs records the date you specified, so
that further updates in the same directory will use the same date (for more information
on sticky tags/dates, see node 'Sticky tags' in the CVS manual).

-D is available with the annotate, checkout, diff, export, history, ls, rdiff, rls,
rtag, tag, and update commands. (The history command uses this option in a slightly
different way; see node 'history options' in the CVS manual).

For a complete description of the date formats accepted by cvs, see node 'Date input
formats' in the CVS manual.

Remember to quote the argument to the -D flag so that your shell doesn't interpret
spaces as argument separators. A command using the -D flag can look like this:

$ cvs diff -D "1 hour ago" cvs.texinfo

-f

When you specify a particular date or tag to cvs commands, they normally ignore files
that do not contain the tag (or did not exist prior to the date) that you specified.
Use the -f option if you want files retrieved even when there is no match for the tag or
date. (The most recent revision of the file will be used).

Note that even with -f, a tag that you specify must exist (that is, in some file, not
necessary in every file). This is so that cvs will continue to give an error if you
mistype a tag name.

-f is available with these commands: annotate, checkout, export, rdiff, rtag, and
update.

WARNING: The commit and remove commands also have a -f option, but it has a different
behavior for those commands. See node 'commit options' in the CVS manual, and node
'Removing files' in the CVS manual.

-k kflag

Override the default processing of RCS keywords other than -kb. See node 'Keyword
substitution' in the CVS manual, for the meaning of kflag. Used with the checkout and
update commands, your kflag specification is sticky; that is, when you use this option
with a checkout or update command, cvs associates your selected kflag with any files it
operates on, and continues to use that kflag with future commands on the same files
until you specify otherwise.

The -k option is available with the add, checkout, diff, export, import, rdiff, and
update commands.

WARNING: Prior to CVS version 1.12.2, the -k flag overrode the -kb indication for a
binary file. This could sometimes corrupt binary files. See node 'Merging and
keywords' in the CVS manual, for more.

-l

Local; run only in current working directory, rather than recursing through
subdirectories.

Available with the following commands: annotate, checkout, commit, diff, edit, editors,
export, log, rdiff, remove, rtag, status, tag, unedit, update, watch, and watchers.

-m message

Use message as log information, instead of invoking an editor.

Available with the following commands: add, commit and import.

-n

Do not run any tag program. (A program can be specified to run in the modules database
(see node 'modules' in the CVS manual); this option bypasses it).

Note: this is not the same as the cvs -n program option, which you can specify to the
left of a cvs command!

Available with the checkout, commit, export, and rtag commands.

-P

Prune empty directories. See node 'Removing directories' in the CVS manual.

-p

Pipe the files retrieved from the repository to standard output, rather than writing
them in the current directory. Available with the checkout and update commands.

-R

Process directories recursively. This is the default for all cvs commands, with the
exception of ls & rls.

Available with the following commands: annotate, checkout, commit, diff, edit, editors,
export, ls, rdiff, remove, rls, rtag, status, tag, unedit, update, watch, and watchers.

-r tag

-r tag[:date]

Use the revision specified by the tag argument (and the date argument for the commands
which accept it) instead of the default head revision. As well as arbitrary tags
defined with the tag or rtag command, two special tags are always available: HEAD refers
to the most recent version available in the repository (also known as the tip of the
MAIN branch, also known as trunk; the name of a branch refers to its tip; this version
of cvs introduces .bhead, but only for the diff command, for the same), and BASE refers
to the revision you last checked out into the current working directory.

The tag specification is sticky when you use this with checkout or update to make your
own copy of a file: cvs remembers the tag and continues to use it on future update
commands, until you specify otherwise (for more information on sticky tags/dates, see
node 'Sticky tags' in the CVS manual).

The tag can be either a symbolic or numeric tag, as described in node 'Tags' in the CVS
manual, or the name of a branch, as described in node 'Branching and merging' in the CVS
manual. When tag is the name of a branch, some commands accept the optional date
argument to specify the revision as of the given date on the branch. When a command
expects a specific revision, the name of a branch is interpreted as the most recent
revision on that branch.

As a MirOS cvs extension, specifying BASE as the date portion of the argument yields the
base revision of the branch specified by the tag portion of the argument, i.e. the
revision on the parent branch the tag branch split off, or, where both branches were the
same. This option has not received very much testing, beware!

Specifying the -q global option along with the -r command option is often useful, to
suppress the warning messages when the rcs file does not contain the specified tag.

Note: this is not the same as the overall cvs -r option, which you can specify to the
left of a cvs command!

-r tag is available with the commit and history commands.

-r tag[:date] is available with the annotate, checkout, diff, export, rdiff, rtag, and
update commands.

-W

Specify file names that should be filtered. You can use this option repeatedly. The
spec can be a file name pattern of the same type that you can specify in the
.cvswrappers file. Available with the following commands: import, and update.

admin


Administration
· Requires: repository, working directory.

· Changes: repository.

· Synonym: rcs

This is the cvs interface to assorted administrative facilities. Some of them have
questionable usefulness for cvs but exist for historical purposes. Some of the
questionable options are likely to disappear in the future. This command does work
recursively, so extreme care should be used.

On unix, if there is a group named cvsadmin, only members of that group can run cvs
admin commands, except for those specified using the UserAdminOptions configuration
option in the CVSROOT/config file. Options specified using UserAdminOptions can be run
by any user. See node 'config' in the CVS manual for more on UserAdminOptions.

The cvsadmin group should exist on the server, or any system running the
non-client/server cvs. To disallow cvs admin for all users, create a group with no
users in it. On NT, the cvsadmin feature does not exist and all users can run cvs
admin.

admin options


Some of these options have questionable usefulness for cvs but exist for historical
purposes. Some even make it impossible to use cvs until you undo the effect!

-Aoldfile

Might not work together with cvs. Append the access list of oldfile to the access list
of the rcs file.

-alogins

Might not work together with cvs. Append the login names appearing in the
comma-separated list logins to the access list of the rcs file.

-b[rev]

Set the default branch to rev. In cvs, you normally do not manipulate default branches;
sticky tags (see node 'Sticky tags' in the CVS manual) are a better way to decide which
branch you want to work on. There is one reason to run cvs admin -b: to revert to the
vendor's version when using vendor branches (see node 'Reverting local changes' in the
CVS manual). There can be no space between -b and its argument.

-cstring

Sets the comment leader to string. The comment leader is not used by current versions
of cvs or rcs 5.7. Therefore, you can almost surely not worry about it. See node
'Keyword substitution' in the CVS manual.

-e[logins]

Might not work together with cvs. Erase the login names appearing in the
comma-separated list logins from the access list of the RCS file. If logins is omitted,
erase the entire access list. There can be no space between -e and its argument.

-I

Run interactively, even if the standard input is not a terminal. This option does not
work with the client/server cvs and is likely to disappear in a future release of cvs.

-i

Useless with cvs. This creates and initializes a new rcs file, without depositing a
revision. With cvs, add files with the cvs add command (see node 'Adding files' in the
CVS manual).

-ksubst

Set the default keyword substitution to subst. See node 'Keyword substitution' in the
CVS manual. Giving an explicit -k option to cvs update, cvs export, or cvs checkout
overrides this default.

-l[rev]

Lock the revision with number rev. If a branch is given, lock the latest revision on
that branch. If rev is omitted, lock the latest revision on the default branch. There
can be no space between -l and its argument.

This can be used in conjunction with the rcslock.pl script in the contrib directory of
the cvs source distribution to provide reserved checkouts (where only one user can be
editing a given file at a time). See the comments in that file for details (and see the
README file in that directory for disclaimers about the unsupported nature of contrib).
According to comments in that file, locking must set to strict (which is the default).

-L

Set locking to strict. Strict locking means that the owner of an RCS file is not exempt
from locking for checkin. For use with cvs, strict locking must be set; see the
discussion under the -l option above.

-mrev:msg

Replace the log message of revision rev with msg.

-Nname[:[rev]]

Act like -n, except override any previous assignment of name. For use with magic
branches, see node 'Magic branch numbers' in the CVS manual.

-nname[:[rev]]

Associate the symbolic name name with the branch or revision rev. It is normally better
to use cvs tag or cvs rtag instead. Delete the symbolic name if both : and rev are
omitted; otherwise, print an error message if name is already associated with another
number. If rev is symbolic, it is expanded before association. A rev consisting of a
branch number followed by a . stands for the current latest revision in the branch. A :
with an empty rev stands for the current latest revision on the default branch, normally
the trunk. For example, cvs admin -nname: associates name with the current latest
revision of all the RCS files; this contrasts with cvs admin -nname:$ which associates
name with the revision numbers extracted from keyword strings in the corresponding
working files.

-orange

Deletes (outdates) the revisions given by range.

Note that this command can be quite dangerous unless you know exactly what you are doing
(for example see the warnings below about how the rev1:rev2 syntax is confusing).

If you are short on disc this option might help you. But think twice before using it—
there is no way short of restoring the latest backup to undo this command! If you
delete different revisions than you planned, either due to carelessness or (heaven
forbid) a cvs bug, there is no opportunity to correct the error before the revisions are
deleted. It probably would be a good idea to experiment on a copy of the repository
first.

Specify range in one of the following ways:

rev1::rev2

Collapse all revisions between rev1 and rev2, so that cvs only stores the differences
associated with going from rev1 to rev2, not intermediate steps. For example, after
-o 1.3::1.5 one can retrieve revision 1.3, revision 1.5, or the differences to get
from 1.3 to 1.5, but not the revision 1.4, or the differences between 1.3 and 1.4.
Other examples: -o 1.3::1.4 and -o 1.3::1.3 have no effect, because there are no
intermediate revisions to remove.

::rev

Collapse revisions between the beginning of the branch containing rev and rev itself.
The branchpoint and rev are left intact. For example, -o ::1.3.2.6 deletes revision
1.3.2.1, revision 1.3.2.5, and everything in between, but leaves 1.3 and 1.3.2.6
intact.

rev::

Collapse revisions between rev and the end of the branch containing rev. Revision rev
is left intact but the head revision is deleted.

rev

Delete the revision rev. For example, -o 1.3 is equivalent to -o 1.2::1.4.

rev1:rev2

Delete the revisions from rev1 to rev2, inclusive, on the same branch. One will not
be able to retrieve rev1 or rev2 or any of the revisions in between. For example, the
command cvs admin -oR_1_01:R_1_02 . is rarely useful. It means to delete revisions up
to, and including, the tag R_1_02. But beware! If there are files that have not
changed between R_1_02 and R_1_03 the file will have the same numerical revision
number assigned to the tags R_1_02 and R_1_03. So not only will it be impossible to
retrieve R_1_02; R_1_03 will also have to be restored from the tapes! In most cases
you want to specify rev1::rev2 instead.

:rev

Delete revisions from the beginning of the branch containing rev up to and including
rev.

rev:

Delete revisions from revision rev, including rev itself, to the end of the branch
containing rev.

None of the revisions to be deleted may have branches or locks.

If any of the revisions to be deleted have symbolic names, and one specifies one of
the :: syntaxes, then cvs will give an error and not delete any revisions. If you
really want to delete both the symbolic names and the revisions, first delete the
symbolic names with cvs tag -d, then run cvs admin -o. If one specifies the non-::
syntaxes, then cvs will delete the revisions but leave the symbolic names pointing to
nonexistent revisions. This behavior is preserved for compatibility with previous
versions of cvs, but because it isn't very useful, in the future it may change to be
like the :: case.

Due to the way cvs handles branches rev cannot be specified symbolically if it is a
branch. See node 'Magic branch numbers' in the CVS manual, for an explanation.

Make sure that no-one has checked out a copy of the revision you outdate. Strange
things will happen if he starts to edit it and tries to check it back in. For this
reason, this option is not a good way to take back a bogus commit; commit a new
revision undoing the bogus change instead (see node 'Merging two revisions' in the CVS
manual).

-q

Run quietly; do not print diagnostics.

-sstate[:rev]

Useful with cvs. Set the state attribute of the revision rev to state. If rev is a
branch number, assume the latest revision on that branch. If rev is omitted, assume the
latest revision on the default branch. Any identifier is acceptable for state. A
useful set of states is Exp (for experimental), Stab (for stable), and Rel (for
released). By default, the state of a new revision is set to Exp when it is created.
The state is visible in the output from cvs log (see node 'log' in the CVS manual), and
in the $Log$ and $State$ keywords (see node 'Keyword substitution' in the CVS manual).
Note that cvs uses the dead state for its own purposes (see node 'Attic' in the CVS
manual); to take a file to or from the dead state use commands like cvs remove and cvs
add (see node 'Adding and removing' in the CVS manual), not cvs admin -s.

-t[file]

Useful with cvs. Write descriptive text from the contents of the named file into the
RCS file, deleting the existing text. The file pathname may not begin with -. The
descriptive text can be seen in the output from cvs log (see node 'log' in the CVS
manual). There can be no space between -t and its argument.

If file is omitted, obtain the text from standard input, terminated by end-of-file or by
a line containing . by itself. Prompt for the text if interaction is possible; see -I.

-t-string

Similar to -tfile. Write descriptive text from the string into the rcs file, deleting
the existing text. There can be no space between -t and its argument.

-U

Set locking to non-strict. Non-strict locking means that the owner of a file need not
lock a revision for checkin. For use with cvs, strict locking must be set; see the
discussion under the -l option above.

-u[rev]

See the option -l above, for a discussion of using this option with cvs. Unlock the
revision with number rev. If a branch is given, unlock the latest revision on that
branch. If rev is omitted, remove the latest lock held by the caller. Normally, only
the locker of a revision may unlock it; somebody else unlocking a revision breaks the
lock. This causes the original locker to be sent a commit notification (see node
'Getting Notified' in the CVS manual). There can be no space between -u and its
argument.

-Vn

In previous versions of cvs, this option meant to write an rcs file which would be
acceptable to rcs version n, but it is now obsolete and specifying it will produce an
error.

-xsuffixes

In previous versions of cvs, this was documented as a way of specifying the names of the
rcs files. However, cvs has always required that the rcs files used by cvs end in ,v,
so this option has never done anything useful.

annotate


What revision modified each line of a file?
· Synopsis: annotate [options] files...

· Requires: repository.

· Changes: nothing.

For each file in files, print the head revision of the trunk, together with information
on the last modification for each line. If backwards annotation is requested, show the
first modification after the specified revision. (Backwards annotation currently
appears to be broken.)

annotate options


These standard options are supported by annotate (see node 'Common options' in the CVS
manual, for a complete description of them):

-b

Backwards, show when a line was removed. Currently appears to be broken.

-l

Local directory only, no recursion.

-R

Process directories recursively.

-f

Use head revision if tag/date not found.

-F

Annotate binary files.

-r tag[:date]

Annotate file as of specified revision/tag or, when date is specified and tag is a
branch tag, the version from the branch tag as it existed on date. See node 'Common
options' in the CVS manual.

-D date

Annotate file as of specified date.

annotate example


For example:

$ cvs annotate ssfile
Annotations for ssfile
***************
1.1 (mary 27-Mar-96): ssfile line 1
1.2 (joe 28-Mar-96): ssfile line 2

The file ssfile currently contains two lines. The ssfile line 1 line was checked in by
mary on March 27. Then, on March 28, joe added a line ssfile line 2, without modifying
the ssfile line 1 line. This report doesn't tell you anything about lines which have been
deleted or replaced; you need to use cvs diff for that (see node 'diff' in the CVS
manual).

The options to cvs annotate are listed in node 'Invoking CVS' in the CVS manual, and can
be used to select the files and revisions to annotate. The options are described in more
detail there and in node 'Common options' in the CVS manual.

checkout


Check out sources for editing
· Synopsis: checkout [options] modules...

· Requires: repository.

· Changes: working directory.

· Synonyms: co, get

Create or update a working directory containing copies of the source files specified by
modules. You must execute checkout before using most of the other cvs commands, since
most of them operate on your working directory.

The modules are either symbolic names for some collection of source directories and
files, or paths to directories or files in the repository. The symbolic names are
defined in the modules file. See node 'modules' in the CVS manual.

Depending on the modules you specify, checkout may recursively create directories and
populate them with the appropriate source files. You can then edit these source files
at any time (regardless of whether other software developers are editing their own
copies of the sources); update them to include new changes applied by others to the
source repository; or commit your work as a permanent change to the source repository.

Note that checkout is used to create directories. The top-level directory created is
always added to the directory where checkout is invoked, and usually has the same name
as the specified module. In the case of a module alias, the created sub-directory may
have a different name, but you can be sure that it will be a sub-directory, and that
checkout will show the relative path leading to each file as it is extracted into your
private work area (unless you specify the -Q global option).

The files created by checkout are created read-write, unless the -r option to cvs (see
node 'Global options' in the CVS manual) is specified, the CVSREAD environment variable
is specified (see node 'Environment variables' in the CVS manual), or a watch is in
effect for that file (see node 'Watches' in the CVS manual).

Note that running checkout on a directory that was already built by a prior checkout is
also permitted. This is similar to specifying the -d option to the update command in
the sense that new directories that have been created in the repository will appear in
your work area. However, checkout takes a module name whereas update takes a directory
name. Also to use checkout this way it must be run from the top level directory (where
you originally ran checkout from), so before you run checkout to update an existing
directory, don't forget to change your directory to the top level directory.

For the output produced by the checkout command see node 'update output' in the CVS
manual.

checkout options


These standard options are supported by checkout (see node 'Common options' in the CVS
manual, for a complete description of them):

-D date

Use the most recent revision no later than date. This option is sticky, and implies -P.
See node 'Sticky tags' in the CVS manual, for more information on sticky tags/dates.

-f

Only useful with the -D or -r flags. If no matching revision is found, retrieve the
most recent revision (instead of ignoring the file).

-k kflag

Process keywords according to kflag. See node 'Keyword substitution' in the CVS manual.
This option is sticky; future updates of this file in this working directory will use
the same kflag. The status command can be viewed to see the sticky options. See node
'Invoking CVS' in the CVS manual, for more information on the status command.

-l

Local; run only in current working directory.

-n

Do not run any checkout program (as specified with the -o option in the modules file;
see node 'modules' in the CVS manual).

-P

Prune empty directories. See node 'Moving directories' in the CVS manual.

-p

Pipe files to the standard output.

-R

Checkout directories recursively. This option is on by default.

-r tag[:date]

Checkout the revision specified by tag or, when date is specified and tag is a branch
tag, the version from the branch tag as it existed on date. This option is sticky, and
implies -P. See node 'Sticky tags' in the CVS manual, for more information on sticky
tags/dates. Also, see node 'Common options' in the CVS manual.

In addition to those, you can use these special command options with checkout:

-A

Reset any sticky tags, dates, or -k options. See node 'Sticky tags' in the CVS manual,
for more information on sticky tags/dates.

-c

Copy the module file, sorted, to the standard output, instead of creating or modifying
any files or directories in your working directory.

-d dir

Create a directory called dir for the working files, instead of using the module name.
In general, using this flag is equivalent to using mkdir dir; cd dir followed by the
checkout command without the -d flag.

There is an important exception, however. It is very convenient when checking out a
single item to have the output appear in a directory that doesn't contain empty
intermediate directories. In this case only, cvs tries to ``shorten'' pathnames to
avoid those empty directories.

For example, given a module foo that contains the file bar.c, the command cvs co -d dir
foo will create directory dir and place bar.c inside. Similarly, given a module bar
which has subdirectory baz wherein there is a file quux.c, the command cvs co -d dir
bar/baz will create directory dir and place quux.c inside.

Using the -N flag will defeat this behavior. Given the same module definitions above,
cvs co -N -d dir foo will create directories dir/foo and place bar.c inside, while cvs
co -N -d dir bar/baz will create directories dir/bar/baz and place quux.c inside.

-j tag

With two -j options, merge changes from the revision specified with the first -j option
to the revision specified with the second j option, into the working directory.

With one -j option, merge changes from the ancestor revision to the revision specified
with the -j option, into the working directory. The ancestor revision is the common
ancestor of the revision which the working directory is based on, and the revision
specified in the -j option.

In addition, each -j option can contain an optional date specification which, when used
with branches, can limit the chosen revision to one within a specific date. An optional
date is specified by adding a colon (:) to the tag: -jSymbolic_Tag:Date_Specifier.

See node 'Branching and merging' in the CVS manual.

-N

Only useful together with -d dir. With this option, cvs will not ``shorten'' module
paths in your working directory when you check out a single module. See the -d flag for
examples and a discussion.

-s

Like -c, but include the status of all modules, and sort it by the status string. See
node 'modules' in the CVS manual, for info about the -s option that is used inside the
modules file to set the module status.

checkout examples


Get a copy of the module tc:

$ cvs checkout tc

Get a copy of the module tc as it looked one day ago:

$ cvs checkout -D yesterday tc

commit


Check files into the repository
· Synopsis: commit [-lnRf] [-m 'log_message' | -F file] [-r revision] [files...]

· Requires: working directory, repository.

· Changes: repository.

· Synonym: ci

Use commit when you want to incorporate changes from your working source files into the
source repository.

If you don't specify particular files to commit, all of the files in your working
current directory are examined. commit is careful to change in the repository only
those files that you have really changed. By default (or if you explicitly specify the
-R option), files in subdirectories are also examined and committed if they have
changed; you can use the -l option to limit commit to the current directory only.

commit verifies that the selected files are up to date with the current revisions in the
source repository; it will notify you, and exit without committing, if any of the
specified files must be made current first with update (see node 'update' in the CVS
manual). commit does not call the update command for you, but rather leaves that for
you to do when the time is right.

When all is well, an editor is invoked to allow you to enter a log message that will be
written to one or more logging programs (see node 'modules' in the CVS manual, and see
node 'loginfo' in the CVS manual) and placed in the rcs file inside the repository.
This log message can be retrieved with the log command; see node 'log' in the CVS
manual. You can specify the log message on the command line with the -m message option,
and thus avoid the editor invocation, or use the -F file option to specify that the
argument file contains the log message.

At commit, a unique commitid is placed in the rcs file inside the repository. All files
committed at once get the same commitid, a string consisting only of hexadecimal digits
(usually 16 in GNU cvs, 19 in MirBSD and MirDebian GNU cvs). FSF GNU cvs 1.11, MirOS
GNU cvs 1.11, and OpenBSD OpenCVS do not support commitids yet. The commitid can be
retrieved with the log and status command; see node 'log' in the CVS manual and node
'File status' in the CVS manual.

commit options


These standard options are supported by commit (see node 'Common options' in the CVS
manual, for a complete description of them):

-l

Local; run only in current working directory.

-R

Commit directories recursively. This is on by default.

-r revision

Commit to revision. revision must be either a branch, or a revision on the main trunk
that is higher than any existing revision number (see node 'Assigning revisions' in the
CVS manual). You cannot commit to a specific revision on a branch.

commit also supports these options:

-c

Refuse to commit files unless the user has registered a valid edit on the file via cvs
edit. This is most useful when commit -c and edit -c have been placed in all .cvsrc
files. A commit can be forced anyways by either regestering an edit retroactively via
cvs edit (no changes to the file will be lost) or using the -f option to commit.
Support for commit -c requires both client and a server versions 1.12.10 or greater.

-F file

Read the log message from file, instead of invoking an editor.

-f

Note that this is not the standard behavior of the -f option as defined in node 'Common
options' in the CVS manual.

Force cvs to commit a new revision even if you haven't made any changes to the file. As
of cvs version 1.12.10, it also causes the -c option to be ignored. If the current
revision of file is 1.7, then the following two commands are equivalent:

$ cvs commit -f file
$ cvs commit -r 1.8 file

The -f option disables recursion (i.e., it implies -l). To force cvs to commit a new
revision for all files in all subdirectories, you must use -f -R.

-m message

Use message as the log message, instead of invoking an editor.

commit examples


Committing to a branch
You can commit to a branch revision (one that has an even number of dots) with the -r
option. To create a branch revision, use the -b option of the rtag or tag commands (see
node 'Branching and merging' in the CVS manual). Then, either checkout or update can be
used to base your sources on the newly created branch. From that point on, all commit
changes made within these working sources will be automatically added to a branch
revision, thereby not disturbing main-line development in any way. For example, if you
had to create a patch to the 1.2 version of the product, even though the 2.0 version is
already under development, you might do:

$ cvs rtag -b -r FCS1_2 FCS1_2_Patch product_module
$ cvs checkout -r FCS1_2_Patch product_module
$ cd product_module
[[ hack away ]]
$ cvs commit

This works automatically since the -r option is sticky.

Creating the branch after editing
Say you have been working on some extremely experimental software, based on whatever
revision you happened to checkout last week. If others in your group would like to work
on this software with you, but without disturbing main-line development, you could commit
your change to a new branch. Others can then checkout your experimental stuff and utilize
the full benefit of cvs conflict resolution. The scenario might look like:

[[ hacked sources are present ]]
$ cvs tag -b EXPR1
$ cvs update -r EXPR1
$ cvs commit

The update command will make the -r EXPR1 option sticky on all files. Note that your
changes to the files will never be removed by the update command. The commit will
automatically commit to the correct branch, because the -r is sticky. You could also do
like this:

[[ hacked sources are present ]]
$ cvs tag -b EXPR1
$ cvs commit -r EXPR1

but then, only those files that were changed by you will have the -r EXPR1 sticky flag.
If you hack away, and commit without specifying the -r EXPR1 flag, some files may
accidentally end up on the main trunk.

To work with you on the experimental change, others would simply do

$ cvs checkout -r EXPR1 whatever_module

diff


Show differences between revisions
· Synopsis: diff [-lR] [-k kflag] [format_options] [(-r rev1[:date1] | -D date1) [-r
rev2[:date2] | -D date2]] [files...]

· Requires: working directory, repository.

· Changes: nothing.

The diff command is used to compare different revisions of files. The default action is
to compare your working files with the revisions they were based on, and report any
differences that are found.

If any file names are given, only those files are compared. If any directories are
given, all files under them will be compared.

The exit status for diff is different than for other cvs commands; for details see node
'Exit status' in the CVS manual.

diff options


These standard options are supported by diff (see node 'Common options' in the CVS manual,
for a complete description of them):

-D date

Use the most recent revision no later than date. See -r for how this affects the
comparison.

-k kflag

Process keywords according to kflag. See node 'Keyword substitution' in the CVS manual.

-l

Local; run only in current working directory.

-R

Examine directories recursively. This option is on by default.

-r tag[:date]

Compare with revision specified by tag or, when date is specified and tag is a branch
tag, the version from the branch tag as it existed on date. Zero, one or two -r options
can be present. With no -r option, the working file will be compared with the revision
it was based on. With one -r, that revision will be compared to your current working
file. With two -r options those two revisions will be compared (and your working file
will not affect the outcome in any way).

One or both -r options can be replaced by a -D date option, described above.

The following options specify the format of the output. They have the same meaning as
in GNU diff. Most options have two equivalent names, one of which is a single letter
preceded by -, and the other of which is a long name preceded by --.

-lines

Show lines (an integer) lines of context. This option does not specify an output format
by itself; it has no effect unless it is combined with -c or -u. This option is
obsolete. For proper operation, patch typically needs at least two lines of context.

-a

Treat all files as text and compare them line-by-line, even if they do not seem to be
text.

-b

Ignore trailing white space and consider all other sequences of one or more white space
characters to be equivalent.

-B

Ignore changes that just insert or delete blank lines.

--binary

Read and write data in binary mode.

--brief

Report only whether the files differ, not the details of the differences.

-c

Use the context output format.

-C lines

--context[=lines]

Use the context output format, showing lines (an integer) lines of context, or three if
lines is not given. For proper operation, patch typically needs at least two lines of
context.

--changed-group-format=format

Use format to output a line group containing differing lines from both files in
if-then-else format. See node 'Line group formats' in the CVS manual.

-d

Change the algorithm to perhaps find a smaller set of changes. This makes diff slower
(sometimes much slower).

-e

--ed

Make output that is a valid ed script.

--expand-tabs

Expand tabs to spaces in the output, to preserve the alignment of tabs in the input
files.

-f

Make output that looks vaguely like an ed script but has changes in the order they
appear in the file.

-F regexp

In context and unified format, for each hunk of differences, show some of the last
preceding line that matches regexp.

--forward-ed

Make output that looks vaguely like an ed script but has changes in the order they
appear in the file.

-H

Use heuristics to speed handling of large files that have numerous scattered small
changes.

--horizon-lines=lines

Do not discard the last lines lines of the common prefix and the first lines lines of
the common suffix.

-i

Ignore changes in case; consider upper- and lower-case letters equivalent.

-I regexp

Ignore changes that just insert or delete lines that match regexp.

--ifdef=name

Make merged if-then-else output using name.

--ignore-all-space

Ignore white space when comparing lines.

--ignore-blank-lines

Ignore changes that just insert or delete blank lines.

--ignore-case

Ignore changes in case; consider upper- and lower-case to be the same.

--ignore-matching-lines=regexp

Ignore changes that just insert or delete lines that match regexp.

--ignore-space-change

Ignore trailing white space and consider all other sequences of one or more white space
characters to be equivalent.

--initial-tab

Output a tab rather than a space before the text of a line in normal or context format.
This causes the alignment of tabs in the line to look normal.

-L label

Use label instead of the file name in the context format and unified format headers.

--label=label

Use label instead of the file name in the context format and unified format headers.

--left-column

Print only the left column of two common lines in side by side format.

--line-format=format

Use format to output all input lines in if-then-else format. See node 'Line formats' in
the CVS manual.

--minimal

Change the algorithm to perhaps find a smaller set of changes. This makes diff slower
(sometimes much slower).

-n

Output RCS-format diffs; like -f except that each command specifies the number of lines
affected.

-N

--new-file

In directory comparison, if a file is found in only one directory, treat it as present
but empty in the other directory.

--new-group-format=format

Use format to output a group of lines taken from just the second file in if-then-else
format. See node 'Line group formats' in the CVS manual.

--new-line-format=format

Use format to output a line taken from just the second file in if-then-else format. See
node 'Line formats' in the CVS manual.

--old-group-format=format

Use format to output a group of lines taken from just the first file in if-then-else
format. See node 'Line group formats' in the CVS manual.

--old-line-format=format

Use format to output a line taken from just the first file in if-then-else format. See
node 'Line formats' in the CVS manual.

-p

Show which C function each change is in.

--rcs

Output RCS-format diffs; like -f except that each command specifies the number of lines
affected.

--report-identical-files

-s

Report when two files are the same.

--show-c-function

Show which C function each change is in.

--show-function-line=regexp

In context and unified format, for each hunk of differences, show some of the last
preceding line that matches regexp.

--side-by-side

Use the side by side output format.

--speed-large-files

Use heuristics to speed handling of large files that have numerous scattered small
changes.

--suppress-common-lines

Do not print common lines in side by side format.

-t

Expand tabs to spaces in the output, to preserve the alignment of tabs in the input
files.

-T

Output a tab rather than a space before the text of a line in normal or context format.
This causes the alignment of tabs in the line to look normal.

--text

Treat all files as text and compare them line-by-line, even if they do not appear to be
text.

-u

Use the unified output format.

--unchanged-group-format=format

Use format to output a group of common lines taken from both files in if-then-else
format. See node 'Line group formats' in the CVS manual.

--unchanged-line-format=format

Use format to output a line common to both files in if-then-else format. See node 'Line
formats' in the CVS manual.

-U lines

--unified[=lines]

Use the unified output format, showing lines (an integer) lines of context, or three if
lines is not given. For proper operation, patch typically needs at least two lines of
context.

-w

Ignore white space when comparing lines.

-W columns

--width=columns

Use an output width of columns in side by side format.

-y

Use the side by side output format.

Line group formats


Line group formats let you specify formats suitable for many applications that allow
if-then-else input, including programming languages and text formatting languages. A line
group format specifies the output format for a contiguous group of similar lines.

For example, the following command compares the TeX file myfile with the original version
from the repository, and outputs a merged file in which old regions are surrounded by
\begin{em}-\end{em} lines, and new regions are surrounded by \begin{bf}-\end{bf} lines.

cvs diff \

--old-group-format='\begin{em}
%<\end{em}
' \

--new-group-format='\begin{bf}
%>\end{bf}
' \

myfile

The following command is equivalent to the above example, but it is a little more verbose,
because it spells out the default line group formats.

cvs diff \

--old-group-format='\begin{em}
%<\end{em}
' \

--new-group-format='\begin{bf}
%>\end{bf}
' \

--unchanged-group-format='%=' \

--changed-group-format='\begin{em}
%<\end{em}
\begin{bf}
%>\end{bf}
' \

myfile

Here is a more advanced example, which outputs a diff listing with headers containing line
numbers in a ``plain English'' style.

cvs diff \

--unchanged-group-format='' \

--old-group-format='-------- %dn line%(n=1?:s) deleted at %df:
%<' \

--new-group-format='-------- %dN line%(N=1?:s) added after %de:
%>' \

--changed-group-format='-------- %dn line%(n=1?:s) changed at %df:
%<-------- to:
%>' \

myfile

To specify a line group format, use one of the options listed below. You can specify up
to four line group formats, one for each kind of line group. You should quote format,
because it typically contains shell metacharacters.

--old-group-format=format

These line groups are hunks containing only lines from the first file. The default old
group format is the same as the changed group format if it is specified; otherwise it is
a format that outputs the line group as-is.

--new-group-format=format

These line groups are hunks containing only lines from the second file. The default new
group format is same as the changed group format if it is specified; otherwise it is a
format that outputs the line group as-is.

--changed-group-format=format

These line groups are hunks containing lines from both files. The default changed group
format is the concatenation of the old and new group formats.

--unchanged-group-format=format

These line groups contain lines common to both files. The default unchanged group
format is a format that outputs the line group as-is.

In a line group format, ordinary characters represent themselves; conversion
specifications start with % and have one of the following forms.

%<

stands for the lines from the first file, including the trailing newline. Each line is
formatted according to the old line format (see node 'Line formats' in the CVS manual).

%>

stands for the lines from the second file, including the trailing newline. Each line is
formatted according to the new line format.

%=

stands for the lines common to both files, including the trailing newline. Each line is
formatted according to the unchanged line format.

%%

stands for %.

%c'C'

where C is a single character, stands for C. C may not be a backslash or an apostrophe.
For example, %c':' stands for a colon, even inside the then-part of an if-then-else
format, which a colon would normally terminate.

%c'\O'

where O is a string of 1, 2, or 3 octal digits, stands for the character with octal code
O. For example, %c'\0' stands for a null character.

Fn

where F is a printf conversion specification and n is one of the following letters,
stands for n's value formatted with F.

e

The line number of the line just before the group in the old file.

f

The line number of the first line in the group in the old file; equals e + 1.

l

The line number of the last line in the group in the old file.

m

The line number of the line just after the group in the old file; equals l + 1.

n

The number of lines in the group in the old file; equals l - f + 1.

E, F, L, M, N

Likewise, for lines in the new file.

The printf conversion specification can be %d, %o, %x, or %X, specifying decimal,
octal, lower case hexadecimal, or upper case hexadecimal output respectively. After
the % the following options can appear in sequence: a - specifying left-justification;
an integer specifying the minimum field width; and a period followed by an optional
integer specifying the minimum number of digits. For example, %5dN prints the number
of new lines in the group in a field of width 5 characters, using the printf format
"%5d".

(A=B?T:E)

If A equals B then T else E. A and B are each either a decimal constant or a single
letter interpreted as above. This format spec is equivalent to T if A's value equals
B's; otherwise it is equivalent to E.

For example, %(N=0?no:%dN) line%(N=1?:s) is equivalent to no lines if N (the number of
lines in the group in the new file) is 0, to 1 line if N is 1, and to %dN lines
otherwise.

Line formats


Line formats control how each line taken from an input file is output as part of a line
group in if-then-else format.

For example, the following command outputs text with a one-column change indicator to the
left of the text. The first column of output is - for deleted lines, | for added lines,
and a space for unchanged lines. The formats contain newline characters where newlines
are desired on output.

cvs diff \

--old-line-format='-%l
' \

--new-line-format='|%l
' \

--unchanged-line-format=' %l
' \

myfile

To specify a line format, use one of the following options. You should quote format,
since it often contains shell metacharacters.

--old-line-format=format

formats lines just from the first file.

--new-line-format=format

formats lines just from the second file.

--unchanged-line-format=format

formats lines common to both files.

--line-format=format

formats all lines; in effect, it sets all three above options simultaneously.

In a line format, ordinary characters represent themselves; conversion specifications
start with % and have one of the following forms.

%l

stands for the contents of the line, not counting its trailing newline (if any). This
format ignores whether the line is incomplete.

%L

stands for the contents of the line, including its trailing newline (if any). If a line
is incomplete, this format preserves its incompleteness.

%%

stands for %.

%c'C'

where C is a single character, stands for C. C may not be a backslash or an apostrophe.
For example, %c':' stands for a colon.

%c'\O'

where O is a string of 1, 2, or 3 octal digits, stands for the character with octal code
O. For example, %c'\0' stands for a null character.

Fn

where F is a printf conversion specification, stands for the line number formatted with
F. For example, %.5dn prints the line number using the printf format "%.5d". See node
'Line group formats' in the CVS manual, for more about printf conversion specifications.

The default line format is %l followed by a newline character.

If the input contains tab characters and it is important that they line up on output,
you should ensure that %l or %L in a line format is just after a tab stop (e.g. by
preceding %l or %L with a tab character), or you should use the -t or --expand-tabs
option.

Taken together, the line and line group formats let you specify many different formats.
For example, the following command uses a format similar to diff's normal format. You
can tailor this command to get fine control over diff's output.

cvs diff \

--old-line-format='< %l
' \

--new-line-format='> %l
' \

--old-group-format='%df%(f=l?:,%dl)d%dE
%<' \

--new-group-format='%dea%dF%(F=L?:,%dL)
%>' \

--changed-group-format='%df%(f=l?:,%dl)c%dF%(F=L?:,%dL)
%<—
%>' \

--unchanged-group-format='' \

myfile

diff examples


The following line produces a Unidiff (-u flag) between revision 1.14 and 1.19 of
backend.c. Due to the -kk flag no keywords are substituted, so differences that only
depend on keyword substitution are ignored.

$ cvs diff -kk -u -r 1.14 -r 1.19 backend.c

Suppose the experimental branch EXPR1 was based on a set of files tagged RELEASE_1_0. To
see what has happened on that branch, the following can be used:

$ cvs diff -r RELEASE_1_0 -r EXPR1

A command like this can be used to produce a context diff between two releases:

$ cvs diff -c -r RELEASE_1_0 -r RELEASE_1_1 > diffs

If you are maintaining ChangeLogs, a command like the following just before you commit
your changes may help you write the ChangeLog entry. All local modifications that have
not yet been committed will be printed.

$ cvs diff -u | less

export


Export sources from CVS, similar to checkout
· Synopsis: export [-flNnR] (-r rev[:date] | -D date) [-k subst] [-d dir] module...

· Requires: repository.

· Changes: current directory.

This command is a variant of checkout; use it when you want a copy of the source for
module without the cvs administrative directories. For example, you might use export to
prepare source for shipment off-site. This command requires that you specify a date or
tag (with -D or -r), so that you can count on reproducing the source you ship to others
(and thus it always prunes empty directories).

One often would like to use -kv with cvs export. This causes any keywords to be
expanded such that an import done at some other site will not lose the keyword revision
information. But be aware that doesn't handle an export containing binary files
correctly. Also be aware that after having used -kv, one can no longer use the ident
command (which is part of the rcs suite—see ident(1)) which looks for keyword strings.
If you want to be able to use ident you must not use -kv.

export options


These standard options are supported by export (see node 'Common options' in the CVS
manual, for a complete description of them):

-D date

Use the most recent revision no later than date.

-f

If no matching revision is found, retrieve the most recent revision (instead of ignoring
the file).

-l

Local; run only in current working directory.

-n

Do not run any checkout program.

-R

Export directories recursively. This is on by default.

-r tag[:date]

Export the revision specified by tag or, when date is specified and tag is a branch tag,
the version from the branch tag as it existed on date. See node 'Common options' in the
CVS manual.

In addition, these options (that are common to checkout and export) are also supported:

-d dir

Create a directory called dir for the working files, instead of using the module name.
See node 'checkout options' in the CVS manual, for complete details on how cvs handles
this flag.

-k subst

Set keyword expansion mode (see node 'Substitution modes' in the CVS manual).

-N

Only useful together with -d dir. See node 'checkout options' in the CVS manual, for
complete details on how cvs handles this flag.

history


Show status of files and users
· Synopsis: history [-report] [-flags] [-options args] [files...]

· Requires: the file $CVSROOT/CVSROOT/history

· Changes: nothing.

cvs can keep a history log that tracks each use of most cvs commands. You can use
history to display this information in various formats.

To enable logging, the LogHistory config option must be set to some value other than the
empty string and the history file specified by the HistoryLogPath option must be
writable by all users who may run the cvs executable (see node 'config' in the CVS
manual).

To enable the history command, logging must be enabled as above and the
HistorySearchPath config option (see node 'config' in the CVS manual) must be set to
specify some number of the history logs created thereby and these files must be readable
by each user who might run the history command.

Creating a repository via the cvs init command will enable logging of all possible
events to a single history log file ($CVSROOT/CVSROOT/history) with read and write
permissions for all users (see node 'Creating a repository' in the CVS manual).

Note: history uses -f, -l, -n, and -p in ways that conflict with the normal use inside
cvs (see node 'Common options' in the CVS manual).

history options


Several options (shown above as -report) control what kind of report is generated:

-c

Report on each time commit was used (i.e., each time the repository was modified).

-e

Everything (all record types). Equivalent to specifying -x with all record types. Of
course, -e will also include record types which are added in a future version of cvs; if
you are writing a script which can only handle certain record types, you'll want to
specify -x.

-m module

Report on a particular module. (You can meaningfully use -m more than once on the
command line.)

-o

Report on checked-out modules. This is the default report type.

-T

Report on all tags.

-x type

Extract a particular set of record types type from the cvs history. The types are
indicated by single letters, which you may specify in combination.

Certain commands have a single record type:

F

release

O

checkout

E

export

T

rtag

One of five record types may result from an update:

C

A merge was necessary but collisions were detected (requiring manual merging).

G

A merge was necessary and it succeeded.

U

A working file was copied from the repository.

P

A working file was patched to match the repository.

W

The working copy of a file was deleted during update (because it was gone from the
repository).

One of three record types results from commit:

A

A file was added for the first time.

M

A file was modified.

R

A file was removed.

The options shown as -flags constrain or expand the report without requiring option
arguments:

-a

Show data for all users (the default is to show data only for the user executing
history).

-l

Show last modification only.

-w

Show only the records for modifications done from the same working directory where
history is executing.

The options shown as -options args constrain the report based on an argument:

-b str

Show data back to a record containing the string str in either the module name, the
file name, or the repository path.

-D date

Show data since date. This is slightly different from the normal use of -D date, which
selects the newest revision older than date.

-f file

Show data for a particular file (you can specify several -f options on the same command
line). This is equivalent to specifying the file on the command line.

-n module

Show data for a particular module (you can specify several -n options on the same
command line).

-p repository

Show data for a particular source repository (you can specify several -p options on the
same command line).

-r rev

Show records referring to revisions since the revision or tag named rev appears in
individual rcs files. Each rcs file is searched for the revision or tag.

-t tag

Show records since tag tag was last added to the history file. This differs from the -r
flag above in that it reads only the history file, not the rcs files, and is much
faster.

-u name

Show records for user name.

-z timezone

Show times in the selected records using the specified time zone instead of UTC.

import


Import sources into CVS, using vendor branches
· Synopsis: import [-options] repository vendortag releasetag...

· Requires: Repository, source distribution directory.

· Changes: repository.

Use import to incorporate an entire source distribution from an outside source (e.g., a
source vendor) into your source repository directory. You can use this command both for
initial creation of a repository, and for wholesale updates to the module from the
outside source. See node 'Tracking sources' in the CVS manual, for a discussion on this
subject.

The repository argument gives a directory name (or a path to a directory) under the cvs
root directory for repositories; if the directory did not exist, import creates it.

When you use import for updates to source that has been modified in your source
repository (since a prior import), it will notify you of any files that conflict in the
two branches of development; use checkout -j to reconcile the differences, as import
instructs you to do.

If cvs decides a file should be ignored (see node 'cvsignore' in the CVS manual), it
does not import it and prints I followed by the filename (see node 'import output' in
the CVS manual, for a complete description of the output).

If the file $CVSROOT/CVSROOT/cvswrappers exists, any file whose names match the
specifications in that file will be treated as packages and the appropriate filtering
will be performed on the file/directory before being imported. See node 'Wrappers' in
the CVS manual.

The outside source is saved in a first-level branch, by default 1.1.1. Updates are
leaves of this branch; for example, files from the first imported collection of source
will be revision 1.1.1.1, then files from the first imported update will be revision
1.1.1.2, and so on.

At least three arguments are required. repository is needed to identify the collection
of source. vendortag is a tag for the entire branch (e.g., for 1.1.1). You must also
specify at least one releasetag to uniquely identify the files at the leaves created
each time you execute import. The releasetag should be new, not previously existing in
the repository file, and uniquely identify the imported release,

Note that import does not change the directory in which you invoke it. In particular,
it does not set up that directory as a cvs working directory; if you want to work with
the sources import them first and then check them out into a different directory (see
node 'Getting the source' in the CVS manual).

import options


This standard option is supported by import (see node 'Common options' in the CVS manual,
for a complete description):

-m message

Use message as log information, instead of invoking an editor.

There are the following additional special options.

-b branch

See node 'Multiple vendor branches' in the CVS manual.

-k subst

Indicate the keyword expansion mode desired. This setting will apply to all files
created during the import, but not to any files that previously existed in the
repository. See node 'Substitution modes' in the CVS manual, for a list of valid -k
settings.

-I name

Specify file names that should be ignored during import. You can use this option
repeatedly. To avoid ignoring any files at all (even those ignored by default), specify
`-I !'.

name can be a file name pattern of the same type that you can specify in the .cvsignore
file. See node 'cvsignore' in the CVS manual.

-W spec

Specify file names that should be filtered during import. You can use this option
repeatedly.

spec can be a file name pattern of the same type that you can specify in the
.cvswrappers file. See node 'Wrappers' in the CVS manual.

-X

Modify the algorithm used by cvs when importing new files so that new files do not
immediately appear on the main trunk.

Specifically, this flag causes cvs to mark new files as if they were deleted on the main
trunk, by taking the following steps for each file in addition to those normally taken
on import: creating a new revision on the main trunk indicating that the new file is
dead, resetting the new file's default branch, and placing the file in the Attic (see
node 'Attic' in the CVS manual) directory.

Use of this option can be forced on a repository-wide basis by setting the
ImportNewFilesToVendorBranchOnly option in CVSROOT/config (see node 'config' in the CVS
manual).

import output


import keeps you informed of its progress by printing a line for each file, preceded by
one character indicating the status of the file:

U file

The file already exists in the repository and has not been locally modified; a new
revision has been created (if necessary).

N file

The file is a new file which has been added to the repository.

C file

The file already exists in the repository but has been locally modified; you will have
to merge the changes.

I file

The file is being ignored (see node 'cvsignore' in the CVS manual).

L file

The file is a symbolic link; cvs import ignores symbolic links. People periodically
suggest that this behavior should be changed, but if there is a consensus on what it
should be changed to, it is not apparent. (Various options in the modules file can be
used to recreate symbolic links on checkout, update, etc.; see node 'modules' in the CVS
manual.)

import examples


See node 'Tracking sources' in the CVS manual, and node 'From files' in the CVS manual.

log


Print out log information for files
· Synopsis: log [options] [files...]

· Requires: repository, working directory.

· Changes: nothing.

Display log information for files. log used to call the rcs utility rlog. Although
this is no longer true in the current sources, this history determines the format of the
output and the options, which are not quite in the style of the other cvs commands.

The output includes the location of the rcs file, the head revision (the latest revision
on the trunk), all symbolic names (tags) and some other things. For each revision, the
revision number, the date, the author, the number of lines added/deleted, the commitid
and the log message are printed. All dates are displayed in local time at the client.
This is typically specified in the $TZ environment variable, which can be set to govern
how log displays dates.

Note: log uses -R in a way that conflicts with the normal use inside cvs (see node
'Common options' in the CVS manual).

log options


By default, log prints all information that is available. All other options restrict the
output. Note that the revision selection options (-d, -r, -s, and -w) have no effect,
other than possibly causing a search for files in Attic directories, when used in
conjunction with the options that restrict the output to only log header fields (-b, -h,
-R, and -t) unless the -S option is also specified.

-b

Print information about the revisions on the default branch, normally the highest branch
on the trunk.

-d dates

Print information about revisions with a checkin date/time in the range given by the
semicolon-separated list of dates. The date formats accepted are those accepted by the
-D option to many other cvs commands (see node 'Common options' in the CVS manual).
Dates can be combined into ranges as follows:

d1<d2

d2>d1

Select the revisions that were deposited between d1 and d2.

<d

d>

Select all revisions dated d or earlier.

d<

>d

Select all revisions dated d or later.

d

Select the single, latest revision dated d or earlier.

The > or < characters may be followed by = to indicate an inclusive range rather than
an exclusive one.

Note that the separator is a semicolon (;).

-h

Print only the name of the rcs file, name of the file in the working directory, head,
default branch, access list, locks, symbolic names, and suffix.

-l

Local; run only in current working directory. (Default is to run recursively).

-N

Do not print the list of tags for this file. This option can be very useful when your
site uses a lot of tags, so rather than "more"'ing over 3 pages of tag information, the
log information is presented without tags at all.

-R

Print only the name of the rcs file.

-rrevisions

Print information about revisions given in the comma-separated list revisions of
revisions and ranges. The following table explains the available range formats:

rev1:rev2

Revisions rev1 to rev2 (which must be on the same branch).

rev1::rev2

The same, but excluding rev1.

:rev

::rev

Revisions from the beginning of the branch up to and including rev.

rev:

Revisions starting with rev to the end of the branch containing rev.

rev::

Revisions starting just after rev to the end of the branch containing rev.

branch

An argument that is a branch means all revisions on that branch.

branch1:branch2

branch1::branch2

A range of branches means all revisions on the branches in that range.

branch.

The latest revision in branch.

A bare -r with no revisions means the latest revision on the default branch, normally
the trunk. There can be no space between the -r option and its argument.

-S

Suppress the header if no revisions are selected.

-s states

Print information about revisions whose state attributes match one of the states given
in the comma-separated list states. Individual states may be any text string, though
cvs commonly only uses two states, Exp and dead. See node 'admin options' in the CVS
manual for more information.

-t

Print the same as -h, plus the descriptive text.

-wlogins

Print information about revisions checked in by users with login names appearing in the
comma-separated list logins. If logins is omitted, the user's login is assumed. There
can be no space between the -w option and its argument.

log prints the intersection of the revisions selected with the options -d, -s, and -w,
intersected with the union of the revisions selected by -b and -r.

log examples


Since log shows dates in local time, you might want to see them in Coordinated Universal
Time (UTC) or some other timezone. To do this you can set your $TZ environment variable
before invoking cvs:

$ TZ=UTC cvs log foo.c
$ TZ=EST cvs log bar.c

(If you are using a csh-style shell, like tcsh, you would need to prefix the examples
above with env.)

ls & rls


· ls [-e | -l] [-RP] [-r tag[:date]] [-D date] [path...]

· Requires: repository for rls, repository & working directory for ls.

· Changes: nothing.

· Synonym: dir & list are synonyms for ls and rdir & rlist are synonyms for rls.

The ls and rls commands are used to list files and directories in the repository.

By default ls lists the files and directories that belong in your working directory,
what would be there after an update.

By default rls lists the files and directories on the tip of the trunk in the topmost
directory of the repository.

Both commands accept an optional list of file and directory names, relative to the
working directory for ls and the topmost directory of the repository for rls. Neither
is recursive by default.

ls & rls options


These standard options are supported by ls & rls:

-d

Show dead revisions (with tag when specified).

-e

Display in CVS/Entries format. This format is meant to remain easily parsable by
automation.

-l

Display all details.

-P

Don't list contents of empty directories when recursing.

-R

List recursively.

-r tag[:date]

Show files specified by tag or, when date is specified and tag is a branch tag, the
version from the branch tag as it existed on date. See node 'Common options' in the CVS
manual.

-D date

Show files from date.

rls examples


$ cvs rls
cvs rls: Listing module: `.'
CVSROOT
first-dir

$ cvs rls CVSROOT
cvs rls: Listing module: `CVSROOT'
checkoutlist
commitinfo
config
cvswrappers
loginfo
modules
notify
rcsinfo
taginfo
verifymsg

rdiff


'patch' format diffs between releases
· rdiff [-flags] [-V vn] (-r tag1[:date1] | -D date1) [-r tag2[:date2] | -D date2]
modules...

· Requires: repository.

· Changes: nothing.

· Synonym: patch

Builds a Larry Wall format patch(1) file between two releases, that can be fed directly
into the patch program to bring an old release up-to-date with the new release. (This
is one of the few cvs commands that operates directly from the repository, and doesn't
require a prior checkout.) The diff output is sent to the standard output device.

You can specify (using the standard -r and -D options) any combination of one or two
revisions or dates. If only one revision or date is specified, the patch file reflects
differences between that revision or date and the current head revisions in the rcs
file.

Note that if the software release affected is contained in more than one directory, then
it may be necessary to specify the -p option to the patch command when patching the old
sources, so that patch is able to find the files that are located in other directories.

rdiff options


These standard options are supported by rdiff (see node 'Common options' in the CVS
manual, for a complete description of them):

-D date

Use the most recent revision no later than date.

-f

If no matching revision is found, retrieve the most recent revision (instead of ignoring
the file).

-k kflag

Process keywords according to kflag. See node 'Keyword substitution' in the CVS manual.

-l

Local; don't descend subdirectories.

-R

Examine directories recursively. This option is on by default.

-r tag

Use the revision specified by tag, or when date is specified and tag is a branch tag,
the version from the branch tag as it existed on date. See node 'Common options' in the
CVS manual.

In addition to the above, these options are available:

-c

Use the context diff format. This is the default format.

-p

Show which C function each change is in.

-s

Create a summary change report instead of a patch. The summary includes information
about files that were changed or added between the releases. It is sent to the standard
output device. This is useful for finding out, for example, which files have changed
between two dates or revisions.

-t

A diff of the top two revisions is sent to the standard output device. This is most
useful for seeing what the last change to a file was.

-u

Use the unidiff format for the context diffs. Remember that old versions of the patch
program can't handle the unidiff format, so if you plan to post this patch to the net
you should probably not use -u.

-V vn

Expand keywords according to the rules current in rcs version vn (the expansion format
changed with rcs version 5). Note that this option is no longer accepted. cvs will
always expand keywords the way that rcs version 5 does.

rdiff examples


Suppose you receive mail from [email protected] asking for an update from release 1.2 to 1.4
of the tc compiler. You have no such patches on hand, but with cvs that can easily be
fixed with a command such as this:

$ cvs rdiff -c -r FOO1_2 -r FOO1_4 tc | \
$$ Mail -s 'The patches you asked for' [email protected]

Suppose you have made release 1.3, and forked a branch called R_1_3fix for bug fixes.
R_1_3_1 corresponds to release 1.3.1, which was made some time ago. Now, you want to see
how much development has been done on the branch. This command can be used:

$ cvs patch -s -r R_1_3_1 -r R_1_3fix module-name
cvs rdiff: Diffing module-name
File ChangeLog,v changed from revision 1.52.2.5 to 1.52.2.6
File foo.c,v changed from revision 1.52.2.3 to 1.52.2.4
File bar.h,v changed from revision 1.29.2.1 to 1.2

release


Indicate that a Module is no longer in use
· release [-d] directories...

· Requires: Working directory.

· Changes: Working directory, history log.

This command is meant to safely cancel the effect of cvs checkout. Since cvs doesn't
lock files, it isn't strictly necessary to use this command. You can always simply
delete your working directory, if you like; but you risk losing changes you may have
forgotten, and you leave no trace in the cvs history file (see node 'history file' in
the CVS manual) that you've abandoned your checkout.

Use cvs release to avoid these problems. This command checks that no uncommitted
changes are present; that you are executing it from immediately above a cvs working
directory; and that the repository recorded for your files is the same as the repository
defined in the module database.

If all these conditions are true, cvs release leaves a record of its execution
(attesting to your intentionally abandoning your checkout) in the cvs history log.

release options


The release command supports one command option:

-d

Delete your working copy of the file if the release succeeds. If this flag is not given
your files will remain in your working directory.

WARNING: The release command deletes all directories and files recursively. This has
the very serious side-effect that any directory that you have created inside your
checked-out sources, and not added to the repository (using the add command; see node
'Adding files' in the CVS manual) will be silently deleted—even if it is non-empty!

release output


Before release releases your sources it will print a one-line message for any file that is
not up-to-date.

U file

P file

There exists a newer revision of this file in the repository, and you have not modified
your local copy of the file (U and P mean the same thing).

A file

The file has been added to your private copy of the sources, but has not yet been
committed to the repository. If you delete your copy of the sources this file will be
lost.

R file

The file has been removed from your private copy of the sources, but has not yet been
removed from the repository, since you have not yet committed the removal. See node
'commit' in the CVS manual.

M file

The file is modified in your working directory. There might also be a newer revision
inside the repository.

? file

file is in your working directory, but does not correspond to anything in the source
repository, and is not in the list of files for cvs to ignore (see the description of
the -I option, and see node 'cvsignore' in the CVS manual). If you remove your working
sources, this file will be lost.

release examples


Release the tc directory, and delete your local working copy of the files.

$ cd .. # You must stand immediately above the

# sources when you issue cvs release.
$ cvs release -d tc
You have [0] altered files in this repository.
Are you sure you want to release (and delete) directory `tc': y
$

server & pserver


Act as a server for a client on stdin/stdout
· pserver [-c path]

server [-c path]

· Requires: repository, client conversation on stdin/stdout

· Changes: Repository or, indirectly, client working directory.

The cvs server and pserver commands are used to provide repository access to remote
clients and expect a client conversation on stdin & stdout. Typically these commands
are launched from inetd or via ssh (see node 'Remote repositories' in the CVS manual).

server expects that the client has already been authenticated somehow, typically via
ssh, and pserver attempts to authenticate the client itself.

Only one option is available with the server and pserver commands:

-c path

Load configuration from path rather than the default location $CVSROOT/CVSROOT/config
(see node 'config' in the CVS manual). path must be /etc/cvs.conf or prefixed by
/etc/cvs/. This option is supported beginning with cvs release 1.12.13.

suck


Download RCS ,v file raw
· suck module/path

· Requires: repository

Locates the file module/path,v or module/pa/Attic/th,v and downloads it raw as RCS
comma-v file.

Output consists of the real pathname of the comma-v file, relative to the CVS
repository, followed by a newline and the binary file content immediately thereafter.

update


Bring work tree in sync with repository
· update [-ACdflPpR] [-I name] [-j rev [-j rev]] [-k kflag] [-r tag[:date] | -D date] [-W
spec] files...

· Requires: repository, working directory.

· Changes: working directory.

After you've run checkout to create your private copy of source from the common
repository, other developers will continue changing the central source. From time to
time, when it is convenient in your development process, you can use the update command
from within your working directory to reconcile your work with any revisions applied to
the source repository since your last checkout or update. Without the -C option, update
will also merge any differences between the local copy of files and their base revisions
into any destination revisions specified with -r, -D, or -A.

update options


These standard options are available with update (see node 'Common options' in the CVS
manual, for a complete description of them):

-D date

Use the most recent revision no later than date. This option is sticky, and implies -P.
See node 'Sticky tags' in the CVS manual, for more information on sticky tags/dates.

-f

Only useful with the -D or -r flags. If no matching revision is found, retrieve the
most recent revision (instead of ignoring the file).

-k kflag

Process keywords according to kflag. See node 'Keyword substitution' in the CVS manual.
This option is sticky; future updates of this file in this working directory will use
the same kflag. The status command can be viewed to see the sticky options. See node
'Invoking CVS' in the CVS manual, for more information on the status command.

-l

Local; run only in current working directory. See node 'Recursive behavior' in the CVS
manual.

-P

Prune empty directories. See node 'Moving directories' in the CVS manual.

-p

Pipe files to the standard output.

-R

Update directories recursively (default). See node 'Recursive behavior' in the CVS
manual.

-r tag[:date]

Retrieve the revisions specified by tag or, when date is specified and tag is a branch
tag, the version from the branch tag as it existed on date. This option is sticky, and
implies -P. See node 'Sticky tags' in the CVS manual, for more information on sticky
tags/dates. Also see node 'Common options' in the CVS manual.

These special options are also available with update.

-A

Reset any sticky tags, dates, or -k options. See node 'Sticky tags' in the CVS manual,
for more information on sticky tags/dates.

-C

Overwrite locally modified files with clean copies from the repository (the modified
file is saved in .#file.revision, however).

-d

Create any directories that exist in the repository if they're missing from the working
directory. Normally, update acts only on directories and files that were already
enrolled in your working directory.

This is useful for updating directories that were created in the repository since the
initial checkout; but it has an unfortunate side effect. If you deliberately avoided
certain directories in the repository when you created your working directory (either
through use of a module name or by listing explicitly the files and directories you
wanted on the command line), then updating with -d will create those directories, which
may not be what you want.

-I name

Ignore files whose names match name (in your working directory) during the update. You
can specify -I more than once on the command line to specify several files to ignore.
Use -I ! to avoid ignoring any files at all. See node 'cvsignore' in the CVS manual,
for other ways to make cvs ignore some files.

-Wspec

Specify file names that should be filtered during update. You can use this option
repeatedly.

spec can be a file name pattern of the same type that you can specify in the
.cvswrappers file. See node 'Wrappers' in the CVS manual.

-jrevision

With two -j options, merge changes from the revision specified with the first -j option
to the revision specified with the second j option, into the working directory.

With one -j option, merge changes from the ancestor revision to the revision specified
with the -j option, into the working directory. The ancestor revision is the common
ancestor of the revision which the working directory is based on, and the revision
specified in the -j option.

Note that using a single -j tagname option rather than -j branchname to merge changes
from a branch will often not remove files which were removed on the branch. See node
'Merging adds and removals' in the CVS manual, for more.

In addition, each -j option can contain an optional date specification which, when used
with branches, can limit the chosen revision to one within a specific date. An optional
date is specified by adding a colon (:) to the tag: -jSymbolic_Tag:Date_Specifier.

See node 'Branching and merging' in the CVS manual.

update output


update and checkout keep you informed of their progress by printing a line for each file,
preceded by one character indicating the status of the file:

U file

The file was brought up to date with respect to the repository. This is done for any
file that exists in the repository but not in your working directory, and for files that
you haven't changed but are not the most recent versions available in the repository.

P file

Like U, but the cvs server sends a patch instead of an entire file. This accomplishes
the same thing as U using less bandwidth.

A file

The file has been added to your private copy of the sources, and will be added to the
source repository when you run commit on the file. This is a reminder to you that the
file needs to be committed.

R file

The file has been removed from your private copy of the sources, and will be removed
from the source repository when you run commit on the file. This is a reminder to you
that the file needs to be committed.

M file

The file is modified in your working directory.

M can indicate one of two states for a file you're working on: either there were no
modifications to the same file in the repository, so that your file remains as you last
saw it; or there were modifications in the repository as well as in your copy, but they
were merged successfully, without conflict, in your working directory.

cvs will print some messages if it merges your work, and a backup copy of your working
file (as it looked before you ran update) will be made. The exact name of that file is
printed while update runs.

C file

A conflict was detected while trying to merge your changes to file with changes from the
source repository. file (the copy in your working directory) is now the result of
attempting to merge the two revisions; an unmodified copy of your file is also in your
working directory, with the name .#file.revision where revision is the revision that
your modified file started from. Resolve the conflict as described in node 'Conflicts
example' in the CVS manual. (Note that some systems automatically purge files that
begin with .# if they have not been accessed for a few days. If you intend to keep a
copy of your original file, it is a very good idea to rename it.) Under vms, the file
name starts with __ rather than .#.

? file

file is in your working directory, but does not correspond to anything in the source
repository, and is not in the list of files for cvs to ignore (see the description of
the -I option, and see node 'cvsignore' in the CVS manual).

AUTHORS


Dick Grune
Original author of the cvs shell script version posted to comp.sources.unix in the
volume6 release of December, 1986. Credited with much of the cvs conflict
resolution algorithms.

Brian Berliner
Coder and designer of the cvs program itself in April, 1989, based on the original
work done by Dick.

Jeff Polk
Helped Brian with the design of the cvs module and vendor branch support and author
of the checkin(1) shell script (the ancestor of cvs import).

Larry Jones, Derek R. Price, and Mark D. Baushke
Have helped maintain cvs for many years.

And many others too numerous to mention here.

Use cvs online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    AstrOrzPlayer
    AstrOrzPlayer
    AstrOrz Player is a free media player
    software, part based on WMP and VLC. The
    player is in a minimalist style, with
    more than ten theme colors, and can also
    b...
    Download AstrOrzPlayer
  • 2
    movistartv
    movistartv
    Kodi Movistar+ TV es un ADDON para XBMC/
    Kodi que permite disponer de un
    decodificador de los servicios IPTV de
    Movistar integrado en uno de los
    mediacenters ma...
    Download movistartv
  • 3
    Code::Blocks
    Code::Blocks
    Code::Blocks is a free, open-source,
    cross-platform C, C++ and Fortran IDE
    built to meet the most demanding needs
    of its users. It is designed to be very
    extens...
    Download Code::Blocks
  • 4
    Amidst
    Amidst
    Amidst or Advanced Minecraft Interface
    and Data/Structure Tracking is a tool to
    display an overview of a Minecraft
    world, without actually creating it. It
    can ...
    Download Amidst
  • 5
    MSYS2
    MSYS2
    MSYS2 is a collection of tools and
    libraries providing you with an
    easy-to-use environment for building,
    installing and running native Windows
    software. It con...
    Download MSYS2
  • 6
    libjpeg-turbo
    libjpeg-turbo
    libjpeg-turbo is a JPEG image codec
    that uses SIMD instructions (MMX, SSE2,
    NEON, AltiVec) to accelerate baseline
    JPEG compression and decompression on
    x86, x8...
    Download libjpeg-turbo
  • More »

Linux commands

  • 1
    abi-tracker
    abi-tracker
    abi-tracker - visualize ABI changes
    timeline of a C/C++ software library.
    DESCRIPTION: NAME: ABI Tracker
    (abi-tracker) Visualize ABI changes
    timeline of a C/C+...
    Run abi-tracker
  • 2
    abicheck
    abicheck
    abicheck - check application binaries
    for calls to private or evolving symbols
    in libraries and for static linking of
    some system libraries. ...
    Run abicheck
  • 3
    couriermlm
    couriermlm
    couriermlm - The Courier mailing list
    manager ...
    Run couriermlm
  • 4
    couriertcpd
    couriertcpd
    couriertcpd - the Courier mail server
    TCP server daemon ...
    Run couriertcpd
  • 5
    gbklatex
    gbklatex
    bg5latex - Use LaTeX directly on a Big5
    encodedtex file bg5pdflatex - Use
    pdfLaTeX directly on a Big5 encodedtex
    file bg5+latex - Use LaTeX directly on a
    Big5+...
    Run gbklatex
  • 6
    gbkpdflatex
    gbkpdflatex
    bg5latex - Use LaTeX directly on a Big5
    encodedtex file bg5pdflatex - Use
    pdfLaTeX directly on a Big5 encodedtex
    file bg5+latex - Use LaTeX directly on a
    Big5+...
    Run gbkpdflatex
  • More »

Ad