This is the command airspy_gpio that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
airspy_gpio - read and write gpio pin values
DESCRIPTION
The Airspy is a tiny and efficient software defined radio receiver.
This application lets the user read and write gpio pins.
SYNOPSIS
airspy_gpio
OPTIONS
-p, --port_no <p>: set port number<p>[0,7] for subsequent read/write operations0
-n, --pin_no <n>: set pin number<n>[0,31] for subsequent read/write operations0
-r, --read: read port number/pin number value and direction specified by last -n argument,
or all port/pin0
-w, --write <v>: write value specified by last -n argument with value<v>[0,1]0
[-s serial_number_64bits]: Open board with specified 64bits serial number.0
Examples
<command> -p 0 -n 12 -r # reads from port 0 pin number 120
<command> -r # reads all pins on all ports0
<command> -p 0 -n 10 -w 1 # writes port 0 pin number 10 with 1 decimal0
Hardware Info AirSpy
LED1(out): -p 0 -n 12 (0=OFF, 1=ON)0
Enable R820T(out): -p 1 -n 7 (0=OFF, 1=ON)0
Enable BiasT(out): -p 1 -n 13 (0=OFF, 1=ON)0
Use airspy_gpio online using onworks.net services
