OnWorks favicon

encssl - Online in the Cloud

Run encssl in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command encssl that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator



enc - symmetric cipher routines


openssl enc -ciphername [-in filename] [-out filename] [-pass arg] [-e] [-d] [-a/-base64]
[-A] [-k password] [-kfile filename] [-K key] [-iv IV] [-S salt] [-salt] [-nosalt] [-z]
[-md] [-p] [-P] [-bufsize number] [-nopad] [-debug] [-none] [-engine id]


The symmetric cipher commands allow data to be encrypted or decrypted using various block
and stream ciphers using keys based on passwords or explicitly provided. Base64 encoding
or decoding can also be performed either by itself or in addition to the encryption or


-in filename
the input filename, standard input by default.

-out filename
the output filename, standard output by default.

-pass arg
the password source. For more information about the format of arg see the PASS PHRASE
ARGUMENTS section in openssl(1).

use a salt in the key derivation routines. This is the default.

don't use a salt in the key derivation routines. This option SHOULD NOT be used except
for test purposes or compatibility with ancient versions of OpenSSL and SSLeay.

-e encrypt the input data: this is the default.

-d decrypt the input data.

-a base64 process the data. This means that if encryption is taking place the data is
base64 encoded after encryption. If decryption is set then the input data is base64
decoded before being decrypted.

same as -a

-A if the -a option is set then base64 process the data on one line.

-k password
the password to derive the key from. This is for compatibility with previous versions
of OpenSSL. Superseded by the -pass argument.

-kfile filename
read the password to derive the key from the first line of filename. This is for
compatibility with previous versions of OpenSSL. Superseded by the -pass argument.

do not use a salt

use salt (randomly generated or provide with -S option) when encrypting (this is the

-S salt
the actual salt to use: this must be represented as a string of hex digits.

-K key
the actual key to use: this must be represented as a string comprised only of hex
digits. If only the key is specified, the IV must additionally specified using the -iv
option. When both a key and a password are specified, the key given with the -K option
will be used and the IV generated from the password will be taken. It probably does
not make much sense to specify both key and password.

-iv IV
the actual IV to use: this must be represented as a string comprised only of hex
digits. When only the key is specified using the -K option, the IV must explicitly be
defined. When a password is being specified using one of the other options, the IV is
generated from this password.

-p print out the key and IV used.

-P print out the key and IV used then immediately exit: don't do any encryption or

-bufsize number
set the buffer size for I/O

disable standard block padding

debug the BIOs used for I/O.

-z Compress or decompress clear text using zlib before encryption or after decryption.
This option exists only if OpenSSL with compiled with zlib or zlib-dynamic option.

Use NULL cipher (no encryption or decryption of input).


The program can be called either as openssl ciphername or openssl enc -ciphername. But the
first form doesn't work with engine-provided ciphers, because this form is processed
before the configuration file is read and any ENGINEs loaded.

Engines which provide entirely new encryption algorithms (such as ccgost engine which
provides gost89 algorithm) should be configured in the configuration file. Engines,
specified in the command line using -engine options can only be used for hadrware-assisted
implementations of ciphers, which are supported by OpenSSL core or other engine, specified
in the configuration file.

When enc command lists supported ciphers, ciphers provided by engines, specified in the
configuration files are listed too.

A password will be prompted for to derive the key and IV if necessary.

The -salt option should ALWAYS be used if the key is being derived from a password unless
you want compatibility with previous versions of OpenSSL and SSLeay.

Without the -salt option it is possible to perform efficient dictionary attacks on the
password and to attack stream cipher encrypted data. The reason for this is that without
the salt the same password always generates the same encryption key. When the salt is
being used the first eight bytes of the encrypted data are reserved for the salt: it is
generated at random when encrypting a file and read from the encrypted file when it is

Some of the ciphers do not have large keys and others have security implications if not
used correctly. A beginner is advised to just use a strong block cipher in CBC mode such
as bf or des3.

All the block ciphers normally use PKCS#5 padding also known as standard block padding:
this allows a rudimentary integrity or password check to be performed. However since the
chance of random data passing the test is better than 1 in 256 it isn't a very good test.

If padding is disabled then the input data must be a multiple of the cipher block length.

All RC2 ciphers have the same key and effective key length.

Blowfish and RC5 algorithms use a 128 bit key.


Note that some of these ciphers can be disabled at compile time and some are available
only if an appropriate engine is configured in the configuration file. The output of the
enc command run with unsupported options (for example openssl enc -help) includes a list
of ciphers, supported by your versesion of OpenSSL, including ones provided by configured

The enc program does not support authenticated encryption modes like CCM and GCM. The
utility does not store or retrieve the authentication tag.

base64 Base 64

bf-cbc Blowfish in CBC mode
bf Alias for bf-cbc
bf-cfb Blowfish in CFB mode
bf-ecb Blowfish in ECB mode
bf-ofb Blowfish in OFB mode

cast-cbc CAST in CBC mode
cast Alias for cast-cbc
cast5-cbc CAST5 in CBC mode
cast5-cfb CAST5 in CFB mode
cast5-ecb CAST5 in ECB mode
cast5-ofb CAST5 in OFB mode

des-cbc DES in CBC mode
des Alias for des-cbc
des-cfb DES in CBC mode
des-ofb DES in OFB mode
des-ecb DES in ECB mode

des-ede-cbc Two key triple DES EDE in CBC mode
des-ede Two key triple DES EDE in ECB mode
des-ede-cfb Two key triple DES EDE in CFB mode
des-ede-ofb Two key triple DES EDE in OFB mode

des-ede3-cbc Three key triple DES EDE in CBC mode
des-ede3 Three key triple DES EDE in ECB mode
des3 Alias for des-ede3-cbc
des-ede3-cfb Three key triple DES EDE CFB mode
des-ede3-ofb Three key triple DES EDE in OFB mode

desx DESX algorithm.

gost89 GOST 28147-89 in CFB mode (provided by ccgost engine)
gost89-cnt `GOST 28147-89 in CNT mode (provided by ccgost engine)

idea-cbc IDEA algorithm in CBC mode
idea same as idea-cbc
idea-cfb IDEA in CFB mode
idea-ecb IDEA in ECB mode
idea-ofb IDEA in OFB mode

rc2-cbc 128 bit RC2 in CBC mode
rc2 Alias for rc2-cbc
rc2-cfb 128 bit RC2 in CFB mode
rc2-ecb 128 bit RC2 in ECB mode
rc2-ofb 128 bit RC2 in OFB mode
rc2-64-cbc 64 bit RC2 in CBC mode
rc2-40-cbc 40 bit RC2 in CBC mode

rc4 128 bit RC4
rc4-64 64 bit RC4
rc4-40 40 bit RC4

rc5-cbc RC5 cipher in CBC mode
rc5 Alias for rc5-cbc
rc5-cfb RC5 cipher in CFB mode
rc5-ecb RC5 cipher in ECB mode
rc5-ofb RC5 cipher in OFB mode

aes-[128|192|256]-cbc 128/192/256 bit AES in CBC mode
aes-[128|192|256] Alias for aes-[128|192|256]-cbc
aes-[128|192|256]-cfb 128/192/256 bit AES in 128 bit CFB mode
aes-[128|192|256]-cfb1 128/192/256 bit AES in 1 bit CFB mode
aes-[128|192|256]-cfb8 128/192/256 bit AES in 8 bit CFB mode
aes-[128|192|256]-ecb 128/192/256 bit AES in ECB mode
aes-[128|192|256]-ofb 128/192/256 bit AES in OFB mode


Just base64 encode a binary file:

openssl base64 -in file.bin -out file.b64

Decode the same file

openssl base64 -d -in file.b64 -out file.bin

Encrypt a file using triple DES in CBC mode using a prompted password:

openssl des3 -salt -in file.txt -out file.des3

Decrypt a file using a supplied password:

openssl des3 -d -salt -in file.des3 -out file.txt -k mypassword

Encrypt a file then base64 encode it (so it can be sent via mail for example) using
Blowfish in CBC mode:

openssl bf -a -salt -in file.txt -out file.bf

Base64 decode a file then decrypt it:

openssl bf -d -salt -a -in file.bf -out file.txt

Decrypt some data using a supplied 40 bit RC4 key:

openssl rc4-40 -in file.rc4 -out file.txt -K 0102030405

Use encssl online using onworks.net services

Free Servers & Workstations

Download Windows & Linux apps

  • 1
    TTGO VGA32 Lite
    TTGO VGA32 Lite
    Features:4:3 and 16:9 low resolution
    VGA outputPS/2 keyboard and mouse
    inputText-based user interface (TUI)
    with dialog managerPartial Unicode
    supportSlave dis...
    Download TTGO VGA32 Lite
  • 2
    Clover EFI bootloader
    Clover EFI bootloader
    Project has moved to
    Features:Boot macOS, Windows, and Linux
    in UEFI or legacy mode on Mac or PC with
    Download Clover EFI bootloader
  • 3
    Sequelize is a promise-based Node.js
    ORM for Postgres, MySQL, MariaDB, SQLite
    and Microsoft SQL Server. It features
    solid transaction support, relations,
    Download Sequelize
  • 4
    Join us in Gitter!
    Enable the URPMS repository in your
    system -
    Download unitedrpms
  • 5
    Boost C++ Libraries
    Boost C++ Libraries
    Boost provides free portable
    peer-reviewed C++ libraries. The
    emphasis is on portable libraries which
    work well with the C++ Standard Library.
    See http://www.bo...
    Download Boost C++ Libraries
  • 6
    VirtualGL redirects 3D commands from a
    Unix/Linux OpenGL application onto a
    server-side GPU and converts the
    rendered 3D images into a video stream
    with which ...
    Download VirtualGL
  • 7
    Library to enable user space
    application programs to communicate with
    USB devices. Audience: Developers, End
    Users/Desktop. Programming Language: C.
    Download libusb
  • More »

Linux commands

  • 1
    4s-cluster-create � Create a KB on the
    cluster. ...
    Run 4s-cluster-createJ
  • 2
    4s-cluster-destroy � Delete the KB from
    a cluster. ...
    Run 4s-cluster-destroyJ
  • 3
    cpan2dist - The CPANPLUS distribution
    creator DESCRIPTION: This script will
    create distributions of "CPAN" modules
    of the format you specify, including its
    Run cpan2distp
  • 4
    cpan2doap - generate DOAP data from a
    CPAN distribution's root directory
    SYNPOSIS: cpan2doap [options]
    DESCRIPTION: The cpan2doap command
    generates DOAP data i...
    Run cpan2doapp
  • 5
    laditools - tools to control and
    monitor LADI (JACK and ladish) systems ...
    Run g15ladi
  • 6
    g15macro - A simple Macro
    recording/playback application for
    G15Daemon DESCRIPTION: This package
    provides a way to record, playback and
    display keyboard macro ...
    Run g15macro
  • More »