envy24control - Online in the Cloud

PROGRAM:

NAME

envy24control - GUI control tool for Envy24 (ice1712) based soundcards, under ALSA.

SYNOPSIS

envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max
8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v] [<profile number>|<profile name>] [-m
midi-channel] [-M] [-w window-width] [-t 0-9]

DESCRIPTION

envy24control allows control of the digital mixer, channel gains and other hardware
settings for sound cards based on the ice1712 chipset (Midiman Delta series, Terratec EWS
and EWX series). It also displays a level meter for each input and output channel.

INVOKING

envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max
8] [-p 0-8] [-s 0-2] [-f <profiles file name>] [-v] [<profile number>|<profile name>] [-m
midi-channel] [-M] [-w window-width] [-t 0-9]

If no control-name is given, then the first sound card is used.

Options
-c card-number
Use the card specified by card-number rather than the first card. This is
equivalent with -Dhw:n option where n is the card number.

-D control-name
Use the card specified by control-name rather than the first card, normally this
will be of the form hw:n where n is the sound card number (zero-based). This is
only needed if you have more than one Envy24-based card or if your Envy24 card is
not configured as the first card in your ALSA driver setup.

-o outputs
Limit number of analog line outputs to display. Default is the number of DACs in
the driver specification. Maximum is 8. The number of analog output lines can only
be reduced from the available number of output lines.

-i inputs
Limit number of analog line inputs to display. Default is the number of ADCs in
the driver specification. Maximum is 8. The number of analog input lines can only
be reduced from the available number of input lines.

-p pcm outputs
Limit number of PCM outputs to display. Default is 8.

-s spdif inputs/outputs
Limit number of SPDIF inputs/outputs to display. Default is 2.

-f name and path of the profiles file name.
From/to this file will envy24control read/write the alsactl settings. If is not
given DEFAULT_PROFILERC or for restore if DEFAULT_PROFILERC doesn't exists
SYS_PROFILERC will be used.

-v view spdif playback channels in the mixer.
It is not possible to manage something (muting, volume levels). It is only to view
the levelmeters. Default is no view of spdif playback channels in the mixer.

-m midi-channel
Use MIDI controller values to control the Faders in the mixer view. The
application will react to controllers on channel midi-channel and send controllers
on this channel when the user moves the GUI sliders.

-M Use an enhanced mapping from midi controller values to db sliders.

-w window-width
Specify the initial width of the envy24control window. Using window-width in the
range 0-20 specifies approx number of mixer channels visible. Values >20 are
interpreted as screen pixels.

-t tall-equal mixer heights
Using -t 1 enlarges the channel mixers to the same height as the digital mixer.
With values >1 the height of all mixers is increased in stages. -t 0 is the
default, set for minimum window height.

Use envy24control online using onworks.net services