EnglishFrenchSpanish

Ad


OnWorks favicon

faxstat - Online in the Cloud

Run faxstat in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command faxstat that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


faxstat - display HylaFAX status

SYNOPSIS


faxstat [ options ]

DESCRIPTION


faxstat reports the status of HylaFAX servers, including (potentially) the status of the
send, receive, done, document, and archive directories. When invoked without options
faxstat reports only the status of the server; the options described below can be used to
override this behaviour.

Server status information indicates the state of the server (idle, sending, receiving,
etc.) and the phone number that is associated with the fax modem.

The job queue report give the status of facsimile jobs queued for transmission; by
default:

· the job identifier,

· the job state (see below for the description of the a format in the JobFmt string),

· the modem or modem class the job is bound to (``any'' if the job can be sent though any
modem),

· the destination (phone number) of the job,

· the time to send the job, or a blank field if the job is being processed or is to be
sent immediately,

· the job's owner,

· and status information about the job (typically the reason why a previous attempt
failed).

The receive queue report lists the facsimile documents that have been received and are
awaiting delivery; by default it includes:

· the document protection mode,

· the number of pages,

· the document's owner,

· the phone number of the sender (if supplied),

· the date and time at which the job was received, and

· the filename of the document in the recvq directory on the server machine.

OPTIONS


-a Display the contents of the archive directory on the server machine

-d Display the status of all jobs that have completed; i.e. those jobs located in
the doneq directory on the server machine. The JobFmt string defines the
content and format of information reported with this option.

-f Display the status of document files located in the docq directory on the server
machine. The FileFmt string defines the content and format of information
reported with this option (see below).

-g Display times and dates in Greenwich Mean Time (GMT). NB: this is the default.

-h host Report the status of the server on a specific host. The host may be either a
symbolic name or a network address. If no -h option is supplied, faxstat uses
the FAXSERVER environment variable to identify the HylaFAX server to contact.
If this variable is not set, then faxstat checks for a setting in the
configuration files (first in the per-user file and then in the system-wide
file). If all of the above fails, then faxstat attempts to contact a server on
the machine where it is run.

-i Display additional status information for the server as given by
/var/spool/hylafax/status/any.info. This status typically has information such
as the HylaFAX version, the physical location of the server machine, and an
administrative contact for the server. See status(5).

-l Display times and dates in the local timezone of the server.

-r Display the receive queue status for each server. The RcvFmt string defines the
content and format of information reported with this option (see below).

-s Display the status of jobs in the send queue on the server machine. The JobFmt
string defines the content and format of information reported with this option
(see below).

-v Trace the protocol exchanges between faxstat and the hfaxd processes on the
standard output.

CONFIGURATION PARAMETERS


faxstat reads configuration information from the file /etc/hylafax/hyla.conf and then from
the file ~/.hylarc. Configuration files follow the conventions described in hylafax-
client(1). The following configuration parameters are recognized:
Tag Type Default Description
FileFmt string see below format string for file status results
Host string localhost host to contact for service
JobFmt string see below format string for job status results
ModemFmt string see below format string for modem status results
PassiveMode boolean false whether or not to use passive mode
Port integer 4559 port to use in contacting server
Protocol string tcp protocol to use in contacting server
RcvFmt string see below format string for received facsimile status results
TimeZone string GMT timezone to use for reporting dates and times
Verbose boolean No whether or not to enable protocol tracing

The configuration parameters are explained below:

FileFmt The format string to use when returning file status information with the -f
option. Formats are specified using printf(3S)-style conventions but using
the field identifiers listed below. Each item can include field width,
precision, left-justification, 0-filling, etc. just as for printf; e.g. %-8p
for an 8-character wide, left-justified, blank-padded field containing the
file protection flags.

Format Description
a Last access time
c Creation time
d Device number (octal)
f Filename
g Group identifier (decimal)
i Inode number (decimal)
l Link count (decimal)
m Last modification time
o Owner (based on file GID)
p Fax-style protection flags (no group bits)
q UNIX-style protection flags
r Root device number (octal)
s File size in bytes (decimal)
u User identifier (decimal)

Host The host to contact for service. (Equivalent to the -h option.)

JobFmt The format string to use when returning job status information for the -s
and -d options. Formats are specified using printf(3S)-style conventions
but using the field identifiers listed below. Each item can include field
width, precision, left-justification, 0-filling, etc. just as for printf;
e.g. %-3j for a 3-character wide, left-justified, blank-padded field
containing the job state.

Format Description
A Destination SubAddress
B Destination Password
C Destination company name
D Total # dials/maximum # dials
E Desired signalling rate
F Client-specific tagline format string
G Desired min-scanline time
H Desired data format
I Client-specified scheduling priority
J Client-specified job tag string
K Desired use of ECM (one-character symbol)
L Destination geographic location
M Notification e-mail address
N Desired use of private tagline (one-character symbol)
O Whether to use continuation cover page (one-character symbol)
P # pages transmitted/total # pages to transmit
Q Client-specified minimum acceptable signalling rate
R Destination person (receiver)
S Sender's identity
T Total # tries/maximum # tries
U Page chopping threshold (inches)
V Job done operation
W Communication identifier
X Job type (one-character symbol)
Y Scheduled date and time
Z Scheduled time in seconds since the UNIX epoch
a Job state (one-character symbol)
b # consecutive failed tries
c Client machine name
d Total # dials
e Public (external) format of dialstring
f # consecutive failed dials
g Group identifier
h Page chop handling (one-character symbol)
i Current scheduling priority
j Job identifier
k Job kill time
l Page length in mm
m Assigned modem
n E-mail notification handling (one-character symbol)
o Job owner
p # pages transmitted
q Job retry time (MM::SS)
r Document resolution in lines/inch
s Job status information from last failure
t Total # tries attempted
u Maximum # tries
v Client-specified dialstring
w Page width in mm
x Maximum # dials
y Total # pages to transmit
z Time to send job

The K format produces: ``D'' if ECM is to be disabled, `` '' (space) if ECM
use is enabled, ``H'' if T.30 Annex C half duplex is enabled, or ``F'' if
T.30 Annex C full duplex is enabled.

The N format produces: `` '' (space) if the system-wide tagline format is to
be used or ``P'' if a private tagline format is to be used.

The O format produces: ``N'' if no continuation cover page is to be used or
`` '' (space) if the system default handling for continuation cover pages is
to be used.

The X format produces: ``F'' for a facsimile job or ``P'' for a pager job.

The a format produces: ``?'' for a job in an undefined state, ``T'' for a
suspended job (not being scheduled), ``P'' for a pending job (waiting for
its time to send to arrive), ``S'' for a sleeping job (waiting for a
scheduled timeout such as a delay between attempts to send), ``B'' for a job
blocked by concurrent activity to the same destination, ``W'' for a job
waiting for resources such as a free modem, ``R'' for a job that is actively
running, and ``D'' for a job that is done and was a success. ``F'' for a
job that failed to complete.

The h format produces: ``D'' if page chopping is disabled, `` '' (space) for
the system default page chop handling, ``A'' when all pages are to be
chopped, or ``L'' if only the last page is to be chopped.

The n format produces: `` '' (space) when no notification messages are to be
delivered, ``D'' when notification is to be sent when the job is done, ``Q''
when notification is to be sent each time the job is requeued, or ``A'' when
notification is to be sent for either the job completing or being requeued.

It is recommended that all items include a field width so that the width of
column title strings can be constrained when constructing headers from the
format string.

ModemFmt The format string to use when returning modem status information. Formats
are specified using printf(3S)-style conventions but using the field
identifiers listed below. Each item can include field width, precision,
left-justification, 0-filling, etc. just as for printf; e.g. %-8h for an
8-character wide, left-justified, blank-padded field containing the name of
the host the server is running on.

Format Description
h Server hostname
l Local identifier string
m Canonical modem name
n FAX phone number
r Maximum pages that can be received in a single call
s Status information string
t Server and session tracing levels (:yyyyy)
v Modem speaker volume as one-character symbol
z A ``*'' if a faxgetty(8) process is running; otherwise `` '' (space)

PassiveMode
Whether or not to use passive mode in communication with the server.

Port The network port to contact for service. (Equivalent to the -h option.)

Protocol The name of the communication protocol to use when contacting a server.
(Equivalent to the FAXSERVICE environment variable.)

RcvFmt The format string to use when returning status information for the -r
option. Formats are specified using printf(3S)-style conventions but using
the field identifiers listed below. Each item can include field width,
precision, left-justification, 0-filling, etc. just as for printf; e.g. %-3b
for a 3-character wide, left-justified, blank-padded field containing the
signalling rate.

Format Description
Y Extended representation of the time when the receive happened
a SubAddress received from sender (if any)
b Signalling rate used during receive
d Data format used during receive
e Error description if an error occurred during receive
f Document filename (relative to the recvq directory)
h Time spent receiving document (HH:MM:SS)
i CIDName value for received fax
j CIDNumber value for received fax
l Page length in mm
m Fax-style protection mode string (``-rwxrwx'')
n File size (number of bytes)
o File owner
p Number of pages in document
q UNIX-style protection flags
r Resolution of received data
s Sender identity (TSI)
t Compact representation of the time when the receive happened
w Page width in mm
z A ``*'' if receive is going on; otherwise `` '' (space)

It is recommended that all items include a field width so that the width of
column title strings can be constrained when constructing headers from the
format string.

TimeZone Control whether times and dates are reported in the local timezone of the
server (``local'') or in GMT (``gmt''). By default times are reported in
GMT.

Verbose Control protocol tracing. (Equivalent to the -v option.)

NOTES


The server login user name may be specified by the FAXUSER environment variable.

Use faxstat online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

Linux commands

  • 1
    a56-toomf
    a56-toomf
    a56-toomf - Motorola DSP56001 assembler
    - convert to OMF ...
    Run a56-toomf
  • 2
    a56
    a56
    A56 - Motorola DSP56001 assembler ...
    Run a56
  • 3
    cpmrm
    cpmrm
    cpmrm - remove files on CP/M disks ...
    Run cpmrm
  • 4
    cpp-4.7
    cpp-4.7
    cpp - The C Preprocessor ...
    Run cpp-4.7
  • 5
    gapi2-fixup
    gapi2-fixup
    undocumented - No manpage for this
    program. DESCRIPTION: This program does
    not have a manpage. Run this command
    with the help switch to see what it
    does. For f...
    Run gapi2-fixup
  • 6
    gapi2-parser
    gapi2-parser
    undocumented - No manpage for this
    program. DESCRIPTION: This program does
    not have a manpage. Run this command
    with the help switch to see what it
    does. For f...
    Run gapi2-parser
  • More »

Ad