OnWorks favicon

gpx - Online in the Cloud

Run gpx in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command gpx that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator



gpx - G-code to X3G converter


gpx [-dgilpqrstvw] [-b BAUDRATE] [-c CONFIG] [-e EEPROM] [-f DIAMETER] [-m MACHINE] [-n
SCALE] [-x X] [-y Y] [-z Z] IN [OUT]


-d simulated ditto printing

-g Makerbot/ReplicatorG GCODE flavor

-i enable stdin and stdout support for command line pipes

-l log to file

-p override build percentage

-q quiet mode

-r Reprap GCODE flavor

-s enable USB serial I/O and send x3G output to 3D printer

-t truncate filename (DOS 8.3 format)

-v verbose mode

-w rewrite 5d extrusion values

Set BAUDRATE for serial I/O. Default is 115200.

CONFIG is the filename of a custom machine definition (ini file).

EEPROM is the filename of an eeprom settings definition (ini file).

DIAMETER is the actual filament diameter in the printer.

MACHINE is the predefined machine type. Available configurations are:

c3 = Cupcake Gen3 XYZ, Mk5/6 + Gen4 Extruder

c4 = Cupcake Gen4 XYZ, Mk5/6 + Gen4 Extruder

cp4 = Cupcake Pololu XYZ, Mk5/6 + Gen4 Extruder

cpp = Cupcake Pololu XYZ, Mk5/6 + Pololu Extruder

t6 = TOM Mk6 - single extruder

t7 = TOM Mk7 - single extruder

t7d = TOM Mk7 - dual extruder

r1 = Replicator 1 - single extruder

r1d = Replicator 1 - dual extruder

r2 = Replicator 2 (default)

r2h = Replicator 2 with HBP

r2x = Replicator 2X

SCALE is the coordinate system scale for the conversion (ABS = 1.0035)

-x X, -y Y, -z Y
X = the x axis offset

Y = the y axis offset

Z = the z axis offset


gpx -p -m r2 my-sliced-model.gcode
gpx -c custom-tom.ini example.gcode /volumes/things/example.x3g
gpx -x 3 -y -3 offset-model.gcode
gpx -m c4 -s sio-example.gcode /dev/tty.usbmodem

Use gpx online using onworks.net services