This is the command mrtg-sensors that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
mrtg-sensors - Returns data from lm-sensors
SYNOPSIS
mrtg-sensors [-m multiplier] chip label [chip label]
DESCRIPTION
mrtg-sensors uses the lm-sensors library to query various system sensors for information
such as temperature, fan speed, etc. The output is written in a form useful as input for
the mrtg utility.
Up to two pairs of chips and labels may be specified. The first is used for the incoming
data value in mrtg, while the second is used for the outgoing data value. Of course, they
need not correspond to incoming or outgoing data, that is merely what mrtg expects.
"chip" is the name of the chip to query, and "label" is the label of the piece of
information that should be queried from the given chip. sensors(1) can be used to look up
all available chips and labels on your system.
Wildcards may be used in chip names, but only the first matching chip will be queried.
If you use the special name "dummy" as a chip name, nothing will be queried, and a value
of zero will be sent to mrtg.
-m is the multiplier to be used in the output. The default multiplier is 1. Note that you
may find it more useful to use sensors.conf(5) to set global multipliers for sensors.
EXAMPLES
mrtg-sensors dummy dummy adm9240-\* fan2
Get the speed of fan #2 from the adm9240 chip.
mrtg-sensors -m 0.5 adm9240-\* fan1 adm9240-\* fan2
Get the speeds of both fan #1 and fan #2, halfing both.
mrtg-sensors -m 2 dummy dummy adm9240-\* temp
Get the cpu termerature, and double it.
Use mrtg-sensors online using onworks.net services
