EnglishFrenchSpanish

OnWorks favicon

perlstyle - Online in the Cloud

Run perlstyle in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command perlstyle that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


perlstyle - Perl style guide

DESCRIPTION


Each programmer will, of course, have his or her own preferences in regards to formatting,
but there are some general guidelines that will make your programs easier to read,
understand, and maintain.

The most important thing is to run your programs under the -w flag at all times. You may
turn it off explicitly for particular portions of code via the "no warnings" pragma or the
$^W variable if you must. You should also always run under "use strict" or know the
reason why not. The "use sigtrap" and even "use diagnostics" pragmas may also prove
useful.

Regarding aesthetics of code lay out, about the only thing Larry cares strongly about is
that the closing curly bracket of a multi-line BLOCK should line up with the keyword that
started the construct. Beyond that, he has other preferences that aren't so strong:

· 4-column indent.

· Opening curly on same line as keyword, if possible, otherwise line up.

· Space before the opening curly of a multi-line BLOCK.

· One-line BLOCK may be put on one line, including curlies.

· No space before the semicolon.

· Semicolon omitted in "short" one-line BLOCK.

· Space around most operators.

· Space around a "complex" subscript (inside brackets).

· Blank lines between chunks that do different things.

· Uncuddled elses.

· No space between function name and its opening parenthesis.

· Space after each comma.

· Long lines broken after an operator (except "and" and "or").

· Space after last parenthesis matching on current line.

· Line up corresponding items vertically.

· Omit redundant punctuation as long as clarity doesn't suffer.

Larry has his reasons for each of these things, but he doesn't claim that everyone else's
mind works the same as his does.

Here are some other more substantive style issues to think about:

· Just because you CAN do something a particular way doesn't mean that you SHOULD do it
that way. Perl is designed to give you several ways to do anything, so consider
picking the most readable one. For instance

open(FOO,$foo) || die "Can't open $foo: $!";

is better than

die "Can't open $foo: $!" unless open(FOO,$foo);

because the second way hides the main point of the statement in a modifier. On the
other hand

print "Starting analysis\n" if $verbose;

is better than

$verbose && print "Starting analysis\n";

because the main point isn't whether the user typed -v or not.

Similarly, just because an operator lets you assume default arguments doesn't mean
that you have to make use of the defaults. The defaults are there for lazy systems
programmers writing one-shot programs. If you want your program to be readable,
consider supplying the argument.

Along the same lines, just because you CAN omit parentheses in many places doesn't
mean that you ought to:

return print reverse sort num values %array;
return print(reverse(sort num (values(%array))));

When in doubt, parenthesize. At the very least it will let some poor schmuck bounce
on the % key in vi.

Even if you aren't in doubt, consider the mental welfare of the person who has to
maintain the code after you, and who will probably put parentheses in the wrong place.

· Don't go through silly contortions to exit a loop at the top or the bottom, when Perl
provides the "last" operator so you can exit in the middle. Just "outdent" it a
little to make it more visible:

LINE:
for (;;) {
statements;
last LINE if $foo;
next LINE if /^#/;
statements;
}

· Don't be afraid to use loop labels--they're there to enhance readability as well as to
allow multilevel loop breaks. See the previous example.

· Avoid using "grep()" (or "map()") or `backticks` in a void context, that is, when you
just throw away their return values. Those functions all have return values, so use
them. Otherwise use a "foreach()" loop or the "system()" function instead.

· For portability, when using features that may not be implemented on every machine,
test the construct in an eval to see if it fails. If you know what version or
patchlevel a particular feature was implemented, you can test $] ($PERL_VERSION in
"English") to see if it will be there. The "Config" module will also let you
interrogate values determined by the Configure program when Perl was installed.

· Choose mnemonic identifiers. If you can't remember what mnemonic means, you've got a
problem.

· While short identifiers like $gotit are probably ok, use underscores to separate words
in longer identifiers. It is generally easier to read $var_names_like_this than
$VarNamesLikeThis, especially for non-native speakers of English. It's also a simple
rule that works consistently with "VAR_NAMES_LIKE_THIS".

Package names are sometimes an exception to this rule. Perl informally reserves
lowercase module names for "pragma" modules like "integer" and "strict". Other
modules should begin with a capital letter and use mixed case, but probably without
underscores due to limitations in primitive file systems' representations of module
names as files that must fit into a few sparse bytes.

· You may find it helpful to use letter case to indicate the scope or nature of a
variable. For example:

$ALL_CAPS_HERE constants only (beware clashes with perl vars!)
$Some_Caps_Here package-wide global/static
$no_caps_here function scope my() or local() variables

Function and method names seem to work best as all lowercase. E.g.,
"$obj->as_string()".

You can use a leading underscore to indicate that a variable or function should not be
used outside the package that defined it.

· If you have a really hairy regular expression, use the "/x" modifier and put in some
whitespace to make it look a little less like line noise. Don't use slash as a
delimiter when your regexp has slashes or backslashes.

· Use the new "and" and "or" operators to avoid having to parenthesize list operators so
much, and to reduce the incidence of punctuation operators like "&&" and "||". Call
your subroutines as if they were functions or list operators to avoid excessive
ampersands and parentheses.

· Use here documents instead of repeated "print()" statements.

· Line up corresponding things vertically, especially if it'd be too long to fit on one
line anyway.

$IDX = $ST_MTIME;
$IDX = $ST_ATIME if $opt_u;
$IDX = $ST_CTIME if $opt_c;
$IDX = $ST_SIZE if $opt_s;

mkdir $tmpdir, 0700 or die "can't mkdir $tmpdir: $!";
chdir($tmpdir) or die "can't chdir $tmpdir: $!";
mkdir 'tmp', 0777 or die "can't mkdir $tmpdir/tmp: $!";

· Always check the return codes of system calls. Good error messages should go to
"STDERR", include which program caused the problem, what the failed system call and
arguments were, and (VERY IMPORTANT) should contain the standard system error message
for what went wrong. Here's a simple but sufficient example:

opendir(D, $dir) or die "can't opendir $dir: $!";

· Line up your transliterations when it makes sense:

tr [abc]
[xyz];

· Think about reusability. Why waste brainpower on a one-shot when you might want to do
something like it again? Consider generalizing your code. Consider writing a module
or object class. Consider making your code run cleanly with "use strict" and "use
warnings" (or -w) in effect. Consider giving away your code. Consider changing your
whole world view. Consider... oh, never mind.

· Try to document your code and use Pod formatting in a consistent way. Here are
commonly expected conventions:

· use "C<>" for function, variable and module names (and more generally anything
that can be considered part of code, like filehandles or specific values). Note
that function names are considered more readable with parentheses after their
name, that is "function()".

· use "B<>" for commands names like cat or grep.

· use "F<>" or "C<>" for file names. "F<>" should be the only Pod code for file
names, but as most Pod formatters render it as italic, Unix and Windows paths with
their slashes and backslashes may be less readable, and better rendered with
"C<>".

· Be consistent.

· Be nice.

Use perlstyle online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

Linux commands

Ad