This is the command pinfo that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
pinfo - curses based lynx-style info browser
SYNTAX
pinfo [options] [infopage]
DESCRIPTION
This is a program for viewing info files. You specify which page you want to read by
passing it an infopage argument. This argument contains the name of an info page (i.e.
'bash'). The program will then (by default) search for it in the current directory,
/usr/share/info, /usr/info, /usr/local/share/info, /usr/local/info. and /opt/info. The
search path can be adjusted by INFOPATH environment variable or in the configuration file.
Pinfo will also automatically add the suffix '-info', '-info.Z', '-info.gz', or
'-info.bz2'. At present other suffixes are not recognized, but you can easily add them to
the function openinfo() in filehandling_functions.c.
When the search for info pages fails, man is called with the infopage argument, and its
output is parsed by pinfo. This means that when you don't have the appropriate info page,
but have a man page instead; the man page will be viewed.
When no infopage is specified, the default `dir' page is shown.
Supported options are
-h, --help - print help information and exit.
-v, --version - print version information and exit.
-m, --manual - uses manual page instead of info by default. (pinfo -m could be used as a
manual pager). Warning: Everything what follows this option is passed to the `man'
program. Don't be confused if pinfo options, which followed `-m' don't work. When using
this option, pinfo does not parse the info options as usual! It invokes the man part of
program.
You can also call the man function of pinfo in another way. When pinfo is called with an
argv[0] (the program file name), which contains the word 'man' in its name, the man
functions are enabled automatically.
Previously there was a symlink to pinfo, called pman, but I had to remove it from the
distribution, since its name was in conflict with some other utility. Anyway, you can feel
free to create such a link if you wish.
-r, --raw-filename - uses a raw filename first (i.e. the name which you specified as
infopage is considered to be a real file in the specified location).
-f, --file synonym for -r.
-a, --apropos - if this is set, apropos is called when no man or info page could be found.
-c, --cut-man-headers - if this is set, man parsing code will try to cut out the repeated
man headers. Use with care. ;)
-s, --squeeze-lines- cut empty lines from manual pages. This option enables auto cutting
of every repeated newline in a manual page.
-t, --force-manual-tag-table- forces manual detection of tag table. This allows you to
view info pages, which may be corrupted. (as i.e. version of jed's pages, shipped with
RH5.0). The tag table corruption usually appears in that the info links, which you follow,
move you to quite unexpected nodes.
--node=nodename, --node nodename- Go to the node `nodename' of info file. Since 0.6.7 it
is also possible to specify nodes as in standalone info via file names, like
`(gcc)Introduction'.
--rcfile=filename, --rcfile filename- Use alternate configuration file.
--long-manual-links, -l- Use long link names in manuals. On some systems the manual
hierarchy is divided into subsections like `3ncurses', etc, while on other systems all
belongs to section `3'. If this option is what your system is like, feel free to use it.
--clear-at-exit, -x- Clear screen at exit.
The options are handled by GNU getopt, so you can here (as in other programs) abbreviate
the option names to the minimal number of characters by which the options differ.
Warning! If you do not have getopt, these options will not work!
DEFAULT KEYS WHEN BROWSING INFO FILE
Just take a look at the example configuration file (below), and at the key descriptions.
Keys available in manual viewer differ a bit from the keys available in info viewer.
ENVIRONMENT
There is a variable $INFOPATH, which can specify the paths to be searched for info files.
It's format is similar to that of the $PATH variable. An example setting could look like:
/usr/info:/usr/somewhere/info:/not/even/in/usr/info
etc. Directories are separated by colons.
COLOR AND KEY DEFINITIONS
There are configuration files called ~/.pinforc and [prefix]/etc/pinforc, for local and
global configuration (where prefix is the prefix of the directory, where pinfo is
installed, i.e. /usr/local, or /). Here's an example of such a file; we'll discuss the
contents below:
# Here are some color setting.
# Whitespace between the entries is optional.
COL_NORMAL = COLOR_WHITE, COLOR_BLACK, NO_BOLD, NO_BLINK
COL_MENUSELECTED = COLOR_RED, COLOR_BLACK, BOLD, NO_BLINK
COL_MENU=COLOR_BLUE,COLOR_BLACK,BOLD, NO_BLINK
COL_NOTESELECTED=COLOR_RED,COLOR_BLACK,BOLD, NO_BLINK
COL_NOTE=COLOR_GREEN,COLOR_BLACK,BOLD, NO_BLINK
COL_TOPLINE=COLOR_YELLOW,COLOR_BLUE,BOLD, NO_BLINK
COL_BOTTOMLINE=COLOR_YELLOW,COLOR_BLUE,BOLD, NO_BLINK
COL_MANUALBOLD=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
COL_MANUALITALIC=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
COL_URL=COLOR_MAGENTA,COLOR_BLACK,BOLD, NO_BLINK
COL_URLSELECTED=COLOR_RED,COLOR_BLACK,NO_BOLD, NO_BLINK
COL_INFOHIGHLIGHT=COLOR_WHITE,COLOR_BLACK,BOLD, NO_BLINK
#
# Here are some keybindings as well...
#
KEY_TOTALSEARCH_1 = 's'
KEY_TOTALSEARCH_2 = 'S'
KEY_SEARCH_1 = '/'
KEY_SEARCH_2 = '.'
KEY_GOTO_1='g'
KEY_GOTO_2='m'
KEY_HOME_1='h'
KEY_HOME_2='H'
KEY_PREVNODE_1='p'
KEY_PREVNODE_2='P'
KEY_NEXTNODE_1='n'
KEY_NEXTNODE_2='N'
KEY_UP_1=KEY_UP
KEY_UP_2='u'
KEY_END_1=
KEY_END_2='e'
KEY_PGDN_1=KEY_NPAGE
KEY_PGDN_2=' '
KEY_PGDN_AUTO_1=0
KEY_PGDN_AUTO_2=' '
KEY_PGUP_1=KEY_PPAGE
KEY_PGUP_2='b'
KEY_PGUP_AUTO_1=0
KEY_PGUP_AUTO_2='b'
KEY_DOWN_1=KEY_DOWN
KEY_DOWN_2='d'
KEY_TOP_1=KEY_HOME
KEY_TOP_2='t'
KEY_BACK_1=KEY_LEFT
KEY_BACK_2='l'
KEY_FOLLOWLINK_1=KEY_RIGHT
KEY_FOLLOWLINK_2='0
# 12 is a code for ctrl+l
KEY_REFRESH_1=12
KEY_REFRESH_2='~'
KEY_SHELLFEED_1='!'
KEY_SHELLFEED_2='1'
KEY_QUIT_1='q'
KEY_QUIT_2='Q'
KEY_DIRPAGE_1='d'
KEY_DIRPAGE_2='D'
KEY_GOLINE_1='l'
KEY_GOLINE_2=0
KEY_PRINT_1=']'
KEY_PRINT_2=0
#
# Some options, explained in the man page
#
MANUAL=false
CUT-MAN-HEADERS=true
CUT-EMPTY-MAN-LINES=true
RAW-FILENAME=false
APROPOS=false
DONT-HANDLE-WITHOUT-TAG-TABLE=false
LONG-MANUAL-LINKS=false
FILTER-0xB7=true
QUIT-CONFIRMATION=false
QUIT-CONFIRM-DEFAULT=no
CLEAR-SCREEN-AT-EXIT=true
STDERR-REDIRECTION="2> /dev/null"
HTTPVIEWER=lynx
FTPVIEWER=lynx
MAILEDITOR=pine
MANLINKS=1:8:2:3:4:5:6:7:9:n:p:o:3X11:3Xt
INFOPATH=/usr/info:/usr/share/info:/usr/local/info
HIGHLIGHTREGEXP=Bash.*has
SAFE-USER=nobody
SAFE-GROUP=nobody
As you can see, the format is simple. First I'll explain the color definitions. First you
must enter a color name (all available color names are present in the example, and they're
self explanatory, I think. There is also a special color COLOR_DEFAULT, which stands for
transparency). Then you enter the foreground color, and the background color. The BOLD
attribute means that we want the foreground color to be highlighted. (i.e. light blue,
light green). BLINK attribute is the blinking attribute, or highlighted background in some
other configurations.
Now let's move to the key definitions. Here we first put a key name (again all keys are
present in the example); then we enter its value -- either surrounded by apostrophes, or a
keycode number (like in KEY_REFRESH_1), or its mnemonic code name if its a special key
(like i.e. in KEY_FOLLOWLINK_1).
If you wish to specify key by code value, use the supplied program 'testkey' to obtain the
needed value. It mainly is a feature, when you want to add some CTRL+letter keybindings,
and similar.
For each function you can bind two keys, i.e. you could bind both Enter and Cursor Right
to the FollowLink-function. As you can see in the example above, the two key names are
KEY_FOLLOWLINK_1 and KEY_FOLLOWLINK_2.
Here's an explanation of the key names:
KEY_TOTALSEARCH_1
Key for searching through all nodes of info file.
KEY_TOTALSEARCH_2
Alternate key for searching through all nodes of info file.
KEY_SEARCH_1
Key for searching through current node (or manual).
KEY_SEARCH_2
Alternate key for searching through current node (or manual).
KEY_SEARCH_AGAIN_1
Key for repeating the last search.
KEY_SEARCH_AGAIN_2
Alternate key for repeating the last search.
KEY_GOTO_1
Key for explicitly going to a node (by specifying its name).
KEY_GOTO_2
Alternate key for explicitly going to a node (by specifying its name).
KEY_PREVNODE_1
Key for going to a node marked as 'Prev' in the header. In man page
viewer this goes to the previous man section.
KEY_PREVNODE_2
Alternate key for going to a node marked as 'Prev' in the header. In man
page viewer this goes to the previous man section.
KEY_NEXTNODE_1
Key for going to a node marked as 'Next' in the header. In man page
viewer this goes to the next man section.
KEY_NEXTNODE_2
Alternate key for going to a node marked as 'Next' in the header. In man
page viewer this goes to the next man section.
KEY_UP_1 Key for scrolling text one line up.
KEY_UP_2 Alternate key for scrolling text one line up.
KEY_END_1 Key for going to the end of the node.
KEY_END_2 Alternate key for going to the end of the node.
KEY_PGDN_1
Key for going one page down in the viewed node.
KEY_PGDN_2
Alternate key for going one page down in the viewed node.
KEY_PGDN_AUTO_1
Key for going to the next node when you're at the end of node (default is
zero -- turned off).
KEY_PGDN_AUTO_2
Alternate key for going to the next node when you're at the end of node
(default is space, as for pgdn_2).
KEY_HOME_1
Key for going to the beginning of the node.
KEY_HOME_2
Alternate key for going to the beginning of the node.
KEY_PGUP_1
Key for going one page up in the viewed node.
KEY_PGUP_2
Alternate key for going one page up in the viewed node.
KEY_PGUP_AUTO_1
Key for going to the `up' node, when being at the top of node. (Default
value is zero -- turned off).
KEY_PGUP_AUTO_2
Alternate key for going to the `up' node, when being at the top of node.
(Default value is `-', as for pgup_2).
KEY_DOWN_1
Key for scrolling the text down one line.
KEY_DOWN_2
Alternate key for scrolling the text down one line.
KEY_TOP_1 Key for going to the top (first) node.
KEY_TOP_2 Alternate key for going to the top (first) node.
KEY_BACK_1
Key for going back (in the history of viewed nodes).
KEY_BACK_2
Alternate key for going back (in the history of viewed nodes).
KEY_FOLLOWLINK_1
Key for following a hypertext link.
KEY_FOLLOWLINK_2
Alternate key for following a hypertext link.
KEY_REFRESH_1
Key for refreshing the screen (hard coded is the ^L value).
KEY_REFRESH_2
Alternate key for refreshing the screen.
KEY_SHELLFEED_1
Key for calling a shell command, and passing the viewed node to the stdin
of that command.
KEY_SHELLFEED_2
Alternate key for calling a shell command, and passing the viewed node to
the stdin of that command.
KEY_QUIT_1
Key for exiting the program.
KEY_QUIT_2
Alternate key for exiting the program.
KEY_GOLINE_1
Key for going to a specified line in file.
KEY_GOLINE_2
Alternate key for going to a specified line in file.
KEY_PRINT_1
Key for printing viewed node or man page.
KEY_PRINT_2
Alternate key for printing viewed node or man page.
The special mnemonics for keys (which are defined at present) are:
KEY_BREAK
KEY_DOWN
KEY_UP
KEY_LEFT
KEY_RIGHT
KEY_DOWN
KEY_HOME
KEY_BACKSPACE
KEY_NPAGE
KEY_PPAGE
KEY_END [Note: this works probably ONLY with Linux ncurses]
KEY_F(x)
KEY_CTRL('c')
- this assigns the key value to a ctrl+c combination. c may be any letter
you wish.
KEY_ALT('c')
- this assigns the key value to a alt+c combination. c may be any letter
you wish. If alt key won't work, you may use ESC+key combination.
'c' - this means a printable character c. The syntax is just like in C/C++
;).
[number] - you can also specify key as its code number. It is useful e.g. when
specifying control keys, and some nonstandard keys. A numerical value of
zero turns given key binding off.
See manual page for curs_getch (3x) for description of their meaning.
Warning! Try not to create some serious key binding conflicts!
The options in the last part of the example configuration file should be fairly self-
explanatory. The variables that can be set to true or false do the same things as the
command line arguments with the same names.
MANUAL If this is set to true the default is to first check for a man page,
instead of a texinfo file.
CUT-MAN-HEADERS
If set to true, then pinfo tries to cut off the repeated headers
throughout man pages.
CUT-EMPTY-MAN-LINES
If set to true, then pinfo tries to cut off the repeated newlines (i.e.
it will shorten each set of consecutive newlines to one newline).
RAW-FILENAME
If set to true, the file argument is taken to be the name of a file in
the current working directory, i.e. the directories in INFOPATH will only
be searched if a file with this name is not in the working directory.
APROPOS If set to true, apropos is called if no info or man page is found.
DONT-HANDLE-WITHOUT-TAG-TABLE
If set to true , pinfo will not attempt to display texinfo pages without
tag tables.
HTTPVIEWER
Set this to the program you want to use to follow http links in
documents.
FTPVIEWER Set this to the program you want to use to follow ftp links in documents.
MAILEDITOR
Set this to your favorite email program, and it will be started if you
follow an email link in a document.
PRINTUTILITY
Utility, which you use for printing. I.e. `lpr'. If you don't use any,
you may also try something like `cat >/dev/lp1', or sth. ;)
MANLINKS This specifies the section names, which may be referenced in your man
pages (i.e. Xtoolkit man pages match the section 3Xt (see for example
XtVaCreateWidget) manpage), Xlib function pages match section 3X11, etc.
Such extensions may not be recognized by default, so it is a good idea to
add them).
INFOPATH This allows you to override the default search path for info pages. The
paths should be separated by colons.
MAN-OPTIONS
This specifies the options, which should be passed to the `man' program.
(see man(1) for description of what they're like).
STDERR-REDIRECTION
Pinfo allows you to redirect the stderr output of called programs. For
example if you don't want to see man's error messages about manual page
formatting, you can use STDER-REDIRECTION="2> /dev/null". This is the
default.
LONG-MANUAL-LINKS
This is another true/false option, which decides whether your system
supports long manual section names, or not. (i.e. "3ncurses" instead of
"3").
FILTER-0xB7
This decides, whether you want to convert 0xb7 chars to `o', or not. For
example for iso-8859-2 fonts this makes man's list marks a bit nicer ;)
(look for example at perl's man page, to see how those marks look like).
QUIT-CONFIRMATION
This decides whether you want to use quit confirmation on exit, or not.
QUIT-CONFIRM-DEFAULT
This yes/no option determines the default answer to the QUIT-CONFIRMATION
dialog. (default answer is when you press a key, that does not match the
asked question).
CLEAR-SCREEN-AT-EXIT
This true/false option determines if you want to have your screen cleared
at exit, or no.
CALL-READLINE-HISTORY
This true/false option determines if you want to have a prompt of last
history entry whenever calling readline wrapper, eg. in subsequent
searches.
HIGHLIGHTREGEXP
This is an option, through which you may pass to pinfo regexps, which
should be highlighted when working with document. Warning! This may turn
very slow if you use it without care!
SAFE-USER This option is used to pass the name of user, to which suid when pinfo is
run with root privileges.
SAFE-GROUP
This option is used to pass the name of group, to which suid when pinfo
is run with root privileges.
INTERNATIONALIZATION SUPPORT
Pinfo implements general features of gnu gettext library (the thing, which you need to see
national messages ;). But it is not the end. Pinfo allows you to use national info pages!
You only need to put them to your info directory, into a subdirectory, which is called
`$LANG'.
Use pinfo online using onworks.net services