This is the command sane-find-scanner that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-p] [-f] [-F filename] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their
Unix device files. Its primary aim is to make sure that scanners can be detected by SANE
backends.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and
/dev/scanner. The test is done by sending a SCSI inquiry command and looking for a device
type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So
sane-find-scanner will find any SCSI scanner connected to those default device files even
if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0),
/dev/usb/scanner, and /dev/usbscanner) are tested. The files are opened and the vendor and
device ids are determined, if the operating system supports this feature. Currently USB
scanners are only found this way if they are supported by the Linux scanner module or the
FreeBSD or OpenBSD uscanner driver. After that test, sane-find-scanner tries to scan for
USB devices found by the USB library libusb (if available). There is no special USB class
for scanners, so the heuristics used to distinguish scanners from other USB devices is not
perfect. sane-find-scanner also tries to find out the type of USB chip used in the
scanner. If detected, it will be printed after the vendor and product ids.
sane-find-scanner will even find USB scanners, that are not supported by any SANE backend.
sane-find-scanner won't find most parallel port scanners, or scanners connected to
proprietary ports. Some parallel port scanners may be detected by sane-find-scanner -p.
At the time of writing this will only detect Mustek parallel port scanners.
OPTIONS
-h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the
test result. If used twice, SCSI inquiry information and the USB device
descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-p Probe parallel port scanners.
-f Force opening all explicitly given devices as SCSI and USB devices. That's useful
if sane-find-scanner is wrong in determining the device type.
-F filename
filename is a file that contains USB descriptors in the format of
/proc/bus/usb/devices as used by Linux. sane-find-scanner tries to identify the
chipset(s) of all USB scanners found in such a file. This option is useful for
developers when the output of "cat /proc/bus/usb/devices" is available but the
scanner itself isn't.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device
file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
sane-find-scanner -p
Probe for parallel port scanners.
Use sane-find-scanner online using onworks.net services