This is the command showtablep that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
showtable - Show data in nicely formatted columns
USAGE
showtable [-options] [file]
DESCRIPTION
Showtable reads an input data stream and displays it in a nicely formatted listing, with
exact formatting depending upon the options. The input stream, file or "STDIN" by default
should consist of data separated by tabs or the defined separator character (see -d).
The actual output formatting is peformed by the ShowTable module.
OPTIONS
There are two general sets of options: those which help determine the format of the input,
and those which determine the format of the output.
Options affecting input
-break=str
Set the inter-column break string to "str". The default is a tab (""\t""). If
-strip is also given, blanks surrounding the break string will also be ignored.
-dstr This is the same as "-break="str.
-nod(ashes)
Do not ignore lines of separators, such as dashes, equal signs, or underlines.
If -nodashes is given, and these lines do occur in the stream, they will be
treated as normal data.
-ti(tles)[=NN]
Treat the first NN rows of data as column titles; multiple words in the column
titles may wrap vertically. If NN is omitted, it defaults to 1. No -titles
option is the same as -titles=0.
-in(put)=type
Set the input type as type, which can be one of: box, list, table, or simple. A
simple-type table is the same as a table-type, but no wrapping characters are
recognized.
-s(trip) Strip blanks from around the column values.
-nos(trip)
Do not strip blanks from the input. Useful if there is formatted or aligned
data within a boxed table.
Options affecting output
-t(able) Use a table format for output, with wrapping of column values longer than the
given or determined column widths. See Data::ShowTable for more details.
-si(mple) Use a simple table format, without any wrapping of column values. See
Data::ShowTable for more details.
-l(ist) Use a list style format. See Data::ShowTable for more details.
-b(ox) Use a "boxed" style table. See Data::ShowTable for more details.
-ht(ml) Use HTML-formating. See Data::ShowTable for more details.
-ti(tles)=name1,name2,...,nameN
Define the column names explicitly. This is useful for naming columns of data
from "STDIN", when showtable is being used as a filter. The first column name,
name1, cannot begin with a digit. This option allows any column titles obtained
from the input to be overridden.
-noh(eaders)
Do not output any headers on the tables; -titles=0 implies this option.
-fn1[,n2, ..., nN]
Select fields numbered n1, n2, etc., to display. Each nN is a field index, or a
range of indexes in the form: "N"-"M" The default is to show all the fields in
each row. Fields are numbered from 1. An example: to show the first, and
three through five fields of the "/etc/passwd" file:
showtable -d: -f1,2-5 /etc/passwd
-fields=fname1[,fname2, ..., fnameN]
Select the named fields to display. The field names must be available, either
through the data stream, or by using the -titles option. The field names given
must match the existing field names exactly.
Using the file "/etc/passwd" for another example: to show the same first two
fields, by name:
showtable -d: -titles=Login,UID -fields=Login,UID /etc/passwd
-w(idth)=num
Set the maximum table width. This value is applied to the variable
Data::Showtable::Max_Table_Width. When the total width of all columns to be
displayed exceeds this value, all column widths are scaled uniformly.
If -width is not given, then for all output but -html, the default value is
either ""COLUMNS"", if defined, or 80, if not. Whith -html mode, there is no
default value for -width; in other words, there is no limit to the width.
-cw(idths)=w1[,w2,...,wN]
Set individual column widths to the specified values. Empty column widths imply
no maximum width. If the -width option is also given, then the -cwidth column
widths can also be given as fractions or percentages.
Example: To set the maximum width of the third column to 20 characters:
-cw=,,20
HTML-only options (the usage of which implies -html)
-noe(scape)
Do not perform HTML escape sequences on the data; this allows embedded HTML text
in the data to be displayed properly with the -html option.
-attributes='attr1 attr2 ...'
Declare the table attributes, which are inserted into the "TABLE" token. For
example, the option:
-attributes='BORDER=0 CELLSPACING=2 CELLPADDING=4'
would cause the following HTML:
<TABLE BORDER=0 CELLSPACING=2 CELLPADDING=4>
The default table attributes are:
<TABLE BORDER=1 CELLSPACING=1 CELLPADDING=1>
-t(itle)_f(ormats)=fmt1;fmt2;...;fmtN
Set the HTML formats for the column titles. The -title_formats (or just -tf)
can be given multiple times, for each column, or formats for multiple columns
can be given on the same option separated by semi-colons "";"".
Each fmtN can itself be multiple HTML items, separated by commas. Each HTML
element can be given either as an HTML token (eg: ""\<BOLD\">"), or as a plain
name (eg: ""BOLD"").
For example, here is a title format specification for three columns, where the
first column title should be bold italic, the second italic, and the third
italic in a smaller font:
-tf='BOLD,I;I;<FONT SIZE=-2>,I'
-d(ata)_f(formats)=fmt1;fmt2;...;fmtN
The same as -title_formats but applies to the column data.
-url(s)=col1=url1,col2=url2,...
Define a mapping from column names, or indexes, to URLs to be inserted as <A
HREF's> around the values for the named columns. Each colN is a column name or
index, and each urlN is a string representing the URL to be inserted for the
given column.
The URL text may contain these substitution strings:
%K - will be substituted with the current column name (or key).
%V - will be substituted with the current column value.
Multiple -url options may be given, if desired, rather than creating one long
argument for a single -url. For example:
showtable -d: -f1,6 -titles=Login,Homedir \
-url='Login=mailto:%V' \
-url='HomeDir=file:%V' \
/etc/passwd
Other options
-help Display some help to the user and quit.
Boxed Input
If the input type is box, then vertical and horizontal box characters are removed from the
input stream, and blanks surrounding the vertical box characters are removed. The
vertical box characters (column separaters) are ""|"" or "":"". The The horizontal box
characters are ""+"" and ""-"".
Morever, data wrapped within a column is recognized and parsed as one column value, by
recognizing the presence of a wrapping prefix or wrapping suffix character. Currently,
the wrapping prefix character is "<", and the wrapping suffix character is ">".
An example of data wrapped within a column is given here. The table below has just two
logical rows of data; with both rows having data wrapped into multiple physical rows.
+---------+---------+---------+
| Col 1 | Col 2 | Col 3 |
+---------+---------+---------+
| This is>| Another>| Row 1,3>|
|< a cont>|< value. |<is also>|
|<inued >| |<long. |
|<value. | | |
|This is >| Item2-2 | Item2-3 |
+---------+---------+---------+
List Format
When using the -list or -input=list options, either, or both, the input and output may be
in a "list" format, which is implemented using the following syntax:
r1c1_name: r1c1_value
r1c2_name: r1c2_value
...
r1cN_name: r1cN_value
r2c1_name: r2c1_value
r2c2_name: r2c2_value
: r2c2_value_continued
...
r2cN_name: r2cN_value
rMc1_name: rMc1_value
rMc2_name: rMc2_value
...
rMcN_name: rMcN_value
Each row of data consists of one or more columns, and ends with a blank line.
Each column consists of a column name, followed by a colon ":", followed by an optional,
single space or tab, followed by the column value, on the same line.
Continuation lines of the previous column value consist of one or more space or tab
characters, a colon ":", one optional, single space or tab, followed by the continuation
value. In the example above, The second column value of the second row was continued.
HTML Input with HTML Output
When using -html on data already containing HTML-formatted text, the -noescape option
should be used. By default, all input text is assumed not to be HTML-formatted, and is
escaped allowing embedded "<", ">" characters, if any, to be displayed correctly.
DEPENDENCIES
Data::ShowTable module
Performs the actual output formatting.
Use showtablep online using onworks.net services