This is the command tsserve that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
tsserve - act as a server which plays the given transport or program stream
DESCRIPTION
Usage:
tsserve <infile> tsserve <infile> -port <n> tsserve [switches] <infile> [switches]
TS tools version 1.11, tsserve built Nov 11 2008 17:15:49
Act as a server which plays the given file (containing Transport Stream or Program
Stream data). The output is always Transport Stream.
Input:
<infile>
An H.222.0 TS or PS file to serve to the client. This will be treated as file 0
(see below).
-0 <file0> .. -9 <file9>
Specify files 0 through 9, selectable with command characters 0 through 9. The
lowest numbered file will be the default for display.
General Switches:
-details
Print out more detailed help information, including some less common options.
-quiet, -q
Suppress informational and warning messages.
-verbose, -v
Output additional diagnostic messages
-port <n>
Listen for a client on port <n> (default 88)
-noaudio
Ignore any audio data
-pad <n>
Pad the start of the output with <n> filler TS packets, to allow the client to
synchronize with the datastream. Defaults to 8.
-noseqhdr
Do not output sequence headers for fast forward/reverse data. Only relevant to
H.262 data.
Program Stream Switches:
-prepeat <n>
Output the program data (PAT/PMT) after every <n> PS packs. Defaults to 100.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
Both of these affect the stream type of the output data.
If the audio stream being output is Dolby (AC-3), then the stream type used to
output it differs for DVB (European) and ATSC (USA) data. It may be specified as
follows:
-dolby dvb
Use stream type 0x06 (the default)
-dolby atsc
Use stream type 0x81
For information on using the program in other modes, see -details.
tsserve <infile> tsserve <infile> -port <n> tsserve [switches] <infile> [switches]
TS tools version 1.11, tsserve built Nov 11 2008 17:15:49
Act as a server which plays the given file (containing Transport Stream or Program
Stream data). The output is always Transport Stream.
Input:
<infile>
An H.222.0 TS or PS file to serve to the client. This will be treated as file 0
(see below).
-0 <file0> .. -9 <file9>
Specify files 0 through 9, selectable with command characters 0 through 9. The
lowest numbered file will be the default for display.
General Switches:
-details
Print out more detailed help information, including some less common options.
-quiet, -q
Suppress informational and warning messages.
-verbose, -v
Output additional diagnostic messages
-port <n>
Listen for a client on port <n> (default 88)
-noaudio
Ignore any audio data
-pad <n>
Pad the start of the output with <n> filler TS packets, to allow the client to
synchronize with the datastream. Defaults to 8.
-noseqhdr
Do not output sequence headers for fast forward/reverse data. Only relevant to
H.262 data.
Program Stream Switches:
-prepeat <n>
Output the program data (PAT/PMT) after every <n> PS packs. Defaults to 100.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
Both of these affect the stream type of the output data.
If the audio stream being output is Dolby (AC-3), then the stream type used to
output it differs for DVB (European) and ATSC (USA) data. It may be specified as
follows:
-dolby dvb
Use stream type 0x06 (the default)
-dolby atsc
Use stream type 0x81
For information on using the program in other modes, see -details.
Use tsserve online using onworks.net services
