This is the command vdaaerl that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
vdaaerl - Measure the echo-return loss on Voicetronix FXO telephony modules
The vdaaerl utility tests the echo-return from a telephone line connected to a Voicetronix
FXO module, such as those used on the OpenPCI range of cards. It can scan all available
impedance values to find the best match for a particular line.
It will wait for an incoming call on the port under test. The calling handset should have
the microphone well muted for the duration of the test.
A series of tones will be played down the line to determine the ERL in several parts of
the audio spectrum. You should avoid creating any other noise on the line while this test
is running, or the results may be skewed.
If no --impedance is specified, and the --scan option is not used, then the default
impedance value (based on the port's country selection) will be used.
The following options are available:
Show summary of options.
Explicitly select the card to test. Default is card 0.
Explicitly select the port to test. Default is port 0 of the card being tested.
Test a particular impedance setting [0 - 15].
--scan Test all available impedances.
Set the hardware play gain. Values may range from -12.0 to 12.0.
Set the hardware record gain. Values may range from -12.0 to 12.0.
Use vdaaerl online using onworks.net services