This is the Linux app named ECG Logger to run in Linux online whose latest release can be downloaded as ECGLoggerv1.6.0.hex. It can be run online in the free hosting provider OnWorks for workstations.
Download and run online this app named ECG Logger to run in Linux online with OnWorks for free.
Follow these instructions in order to run this app:
- 1. Downloaded this application in your PC.
- 2. Enter in our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 3. Upload this application in such filemanager.
- 4. Start the OnWorks Linux online or Windows online emulator or MACOS online emulator from this website.
- 5. From the OnWorks Linux OS you have just started, goto our file manager https://www.onworks.net/myfiles.php?username=XXXXX with the username that you want.
- 6. Download the application, install it and run it.
SCREENSHOTS
Ad
ECG Logger to run in Linux online
DESCRIPTION
The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode.The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential amplifier. It can help monitoring arrhythmia syndromes such as bradycardia, tachycardia, extra-systoles or pause.
WARNING:
In no case it can be use to replace a professional medical examination.
Device MUST NOT BE CONNECTED to appliance powered by mains - risk of electrical shocks
**************************************************************************************
see also:
ECG Logger Viewer : https://sourceforge.net/projects/ecg-logger-viewer/
Features
- NEW: Version 1.6 with drastically improved performances
- Stable, reliable and durable recorder, based on "Arduino Nano".
- Very low cost (less than 30 €/35 $) and easy to built device.
- ECG waveform recording and Event marking.
- Record up to 24-hour of ECG signal.
- Built-in SD card for storage (removable).
- Record waveform details based on high precision and sampling frequency.
- Record the state of heart rate using higher sampling frequency (250Hz).
- Accurate start time record and sampled data (8/10-bit).
- Automatic R-R peaks detection using Pan-Tompkins.
- Small in size (L100 x W60 x H25 mm).
- International standard of 3 leads (single channel).
- No need to compress or delete original data, thanks to the large storage capability.
- Very simple and user friendly interface (1 LED + 1 Button).
- ECG data format has been optimized and details are available from the documentation.
- ------------------------------------------------------
- BUILDING INSTRUCTIONS:
- Device assembly instructions and list of components are available from the PDF documentation.
- Firmware source code is available from the Files section.
- ------------------------------------------------------
- NOTES:
- ECG File format is proprietary (details are available in documentation).
- EDF/BDF format exportation requires the companion software application (ECG Logger Viewer).
- ------------------------------------------------------
- DISCLAIMER: *** RISK OF ELECTRICAL SHOCKS AND DEATH ***
- Persons unskilled, not familiar or unaware of electrical risks are discouraged to get involved.
- This project is ONLY for educational purposes and not aimed for medical diagnostics.
- Use of this project information is under the SOLE RESPONSIBILITY of the USERS.
- This device has not been approved for any kind of use.
Audience
Education
User interface
Command-line
Programming Language
C
This is an application that can also be fetched from https://sourceforge.net/projects/ecg-logger/. It has been hosted in OnWorks in order to be run online in an easiest way from one of our free Operative Systems.
