İngilizceFransızcaİspanyolca

Ad


OnWorks favicon'u

ictransNCARG - Online in the Cloud

Run ictransNCARG in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command ictransNCARG that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

Program:

ADI


ictrans - interactive NCAR CGM translator ctrans

SİNOPSİS


iktrans [ -d cihaz ] [ -yazı tipi yazı tipi ] [ -e senaryo ]* [ -yumuşak ] [ -Bell ] [ -min dk ] [
-lmaks maksimum ] [ -lölçek ölçek ] [ -arkadaş pal_fname ] [ -Sürüm ] [ -geniş pencere_kimliği ] [
cihaza özel seçenekleri ] meta dosyası...

TANIM


iktrans is the user interface to the Computer Graphics Metafile (CGM) translator ctrans.
iktrans will enter command interpreter mode upon invocation and await instructions from
the user. When waiting for commands from the user, iktrans displays the prompt `ictrans>'.

çağrı üzerine iktrans performs a configuration of its spooled device table. The table is
configured by processing several sources. iktrans first searches for the file ncarv_spool
in the $NCARG_ROOT/lib/ncarg directory. If the file exists iktrans will load it into the
spooled device table. Next, ictrans searches for the file .ncarv_spool kullanıcının evinde
directory. If found, its contents are merged into the spooler table. Finally, the
NCARV_SPOOL environment variable may contain the definition for a single spooler. If this
variable is set, its contents also are merged into the table. Each entry in the above set
of sources is identified by a name. If a conflict in names exists then the last entry
encountered takes precedence. i.e. the previous entry of the same name is overridden.

SEÇENEKLER


-Bell Her karenin sonunda zili çalın. Varsayılan, sessiz modda çalıştırmaktır. Bu
seçeneği tüm cihazlar tarafından desteklenmez.

-d cihaz
Cihaz adı. iktrans kullanacak Grafik başlığı (varsa) veya uygun
tarafından belirtilen grafik kitaplığı cihaz;

If cihaz önünde bir UNIX dizin yolu bulunur, ardından iktrans buna bakacak
Belirtilen grafik kapağı için dizin. Aksi halde iktrans dizini arar
Grafik görüntüsü için $NCARG_ROOT/lib/ncarg/graphcaps.

dışındaki tüm cihaz özellikleri için X11 çıktı standart çıkışa yönlendirilir. İçinde
durum X11 çeviri, X11 kitaplıklarına uygun çağrılarla sonuçlanır. Görmek
grafik kapağı(5NCAG) desteklenen cihazların açıklaması için Görmek gcap'ler(1NCAG) Bir için
tarafından desteklenen cihazların listesi senin özel yapılandırma ctrans.

Bu seçenek, GRAFİKAP Çevre değişkeni.

-e senaryo
senaryo bekar iktrans emretmek. geçerli iktrans komutlar tartışılır
KOMUTLAR aşağıdaki bölüm. çoklu -e seçenekler tek bir komut satırında görünebilir.
Komutunuz boşluk veya meta karakterler içeriyorsa, tırnak işaretleri kullanmaya dikkat edin.
kabuk tarafından yorumlanabilir. Bu seçenek kullanıldığında iktrans girmiyor
etkileşimli mod. Sadece verilen komutları yerine getirir ve ardından çıkar.

-yazı tipi yazı tipi başlığı
Metni okşamak için kullanılacak Fontcap dosyası. CGM'yi yorumlarken METİN komuta
elemanlar kullanımı yazı tipi başlığı metinsel çeviri için varsayılan yazı tipi olarak. Not: CGM'ler
CGM'de gömülü olmayan metinsel açıklamalar içerir METİN elementler. Buradan
etkilenmezler yazı tipi başlığı özellikler. Ayrıca bir CGM'nin
komutta sağlanan bir yazı tipini geçersiz kılabilecek adlandırılmış bir yazı tipini açıkça belirtin
hat. FONTCAP ortam değişkeni, bir varsayılanı belirtmek için de kullanılabilir.
yazı tipi başlığı.

If yazı tipi başlığı önünde bir UNIX dizin yolu bulunur, ardından iktrans buna bakacak
belirtilen yazı tipi başlığı için dizin. Aksi halde iktrans dizini arar
Yazı tipi başlığı için $NCARG_ROOT/lib/ncarg/fontcaps.

Yerimizi yazı tipi başlığı(5NCAG) Kullanılabilir yazı tipi kapaklarının açıklaması için. Görmek fcap(1NCAG)
sisteminizde yüklü olan yazı tipi kapaklarının listesi için.

Bu seçenek, yazı tipi Çevre değişkeni.

-min dk
Çizgi genişliği ölçeklemeyi destekleyen cihazlarda tüm çizgilerin ölçeklenmesi garanti edilir
en azından dk o cihaz için varsayılan çizgi genişliğinin çarpımı. Bu seçenek etkin bir şekilde
CGM öğesi "LINE WIDTH" için minimum değerin dk.

-lmaks maksimum
Çizgi genişliği ölçeklemeyi destekleyen cihazlarda tüm çizgilerin ölçeklenmesi garanti edilir
en fazla maksimum o cihaz için varsayılan çizgi genişliğinin çarpımı. Bu seçenek etkin bir şekilde
CGM öğesi "LINE WIDTH" için maksimum değerin maksimum.
ayar sonuçları maksimum o zaman daha az dk tanımsızdır.

-lölçek ölçek
içindeki tüm çizgi genişliği özelliklerini ölçeklendirmeyi destekleyen cihazlarda
meta dosyası tarafından ölçeklendirilecek ölçek. will be scaled ölçek This option is subject
to modification by the -min ve -lmaks seçenekleri.

-arkadaş pal_fname
Dosyada tanımlanan renk paletini kullanın pal_fname sonraki çeviri için
meta dosyası. Bu palet, CGM tarafından tanımlanan herhangi bir renk haritasını geçersiz kılar.
tercüme edildi. biçiminin açıklaması için pal_fname görmek ras_palet(5NCARG).

-yumuşak Doldurulmuş tüm çokgenlerin yazılımla doldurulmasını koşulsuz olarak gerçekleştirin. Bu seçenek olabilir
useful for devices which have limits on the number of vertices describing a
polygon. On some devices this number is known and software filling is performed, as
appropriate, without user specification.

-Sürüm
Sürüm numarasını yazdırın ve ardından çıkın.

CİHAZ ÖZEL SEÇENEKLER


iktrans accepts an identical set of device-specific options to that of ctrans. bir için
description of the device-specific options see ctrans(1NCAG).

KOMUTLAR


Komuta Structure
iktrans commands have a simple and regular structure. Commands which operate directly on
the metafile being processed may be preceded by a frame_list which designate the frames to
which the command applies. Some commands accept arguments. Anything following a command
name is regarded as an argument:

( çerçeve [ ,çerçeve ])* komuta ( tartışma )*

A comma-separated pair of frames implies the inclusive list of frames. If a frame list is
omitted and a command requires a frame then the current frame is used as the default. If
no argument list is specified and one is required then a default argument is used whenever
mümkün.

Örneğin, komut 1,5 8 kayıt etmek /tmp/foo would write the first through fifth and the
eighth frame of the metafile to the file /tmp/foo.

Commands will ignore any unexpected arguments. Command names may be abbreviated up to the
point that they are unique.

çerçeve Listeler
Çerçeveler birkaç şekilde ele alınabilir:

nnn By frame number. Frames are assigned a relative number from first to last in the
metafile. The first frame is numbered 1.

$ The last frame in the file.

. Geçerli çerçeve. iktrans keeps track of the last frame upon which an operation
was performed. This frame is called the "current frame".

çerçeve+-n
A frame number followed by a plus sign (+) veya eksi işareti (-), followed by a
decimal number, specifies the frame plus or minus the indicated number of frames.
çerçeve may be omitted in which case the current frame is assumed. For example,
`10+2' addresses frame 12 in the metafile.

Komutları
! komuta
koşmak komuta as a shell command on the local machine.

takma ad [ isim [ def ]]
Atamak def takma isme isim. Eğer def is omitted, the alias isim is displayed along
with its current definition. If both isim ve def are omitted, all aliases are
Görüntülenen. def şu şekildedir:

: [ ctrans_args ] : [ filter_chain ]

nerede ctrans_args is list of command line arguments for the metafile translator
ctrans ve filter_chain is a set of simple commands separated by |. filter_chain
may be terminated by > or >> Dosya. Örneğin:

ictrans> takma ad name1 : -d xwd : | kedi > dış dosya

or

ictrans> takma ad name2 : -d ps.mono : | filtre1 | lpr

dup [numara]
This command is used to set the number of times each frame is displayed during
subsequent plotting. The default is one. If dup is invoked without any arguments
the current value of dup is returned.

saymak
Reports number of frames contained in the file.

akım
Reports the current frame.

dosya [ meta dosyası ]
Dosya meta dosyası will be used for subsequent translation. iktrans uses the shell
defined by the environment variable SHELL (/ Bin / sh by default) to perform filename
substitution on meta dosyası. The rules governing filename substitution are as defined
by the working shell. If no argument is given the current metafile name is
bildirilmiştir.

yazı tipi [ yazı tipi ]
Set the fontcap to yazı tipi for future translation. This function is identical to that
arasında -yazı tipi seçenek. Eğer yazı tipi is omitted the current fontcap name is reported.

yardım et [ komuta ]
Print a usage statement for komuta. Eğer komuta is omitted a brief description of
all commands is given.

[ Çerçeve ] liste
Provide brief information about each metafile frame in Çerçeve. Eğer Çerçeve is
omitted then the current frame is used. If Çerçeve is omitted and the current frame
is not the last frame then the current frame is incremented to the next frame in
the metafile.

< frame1 > < frame2 > birleştirme
Plot frame number frame1 and then plot frame number frame2 over the first frame
without clearing the device. The result is a "merge" of the two plots. The current
frame is not changed. There are no defaults for frame1 or frame2. Sonuç
plot might not be what was expected. Attributes from the first frame, such as
color, may override attributes in the second frame.

döngü
Toggle loop mode on or off. When loop mode is on subsequent arsa komutlar
cause the requested frames to be plotted and then iktrans will proceed to either
the first frame in the defined segment or the last and repeatedly display the first
through last (last through first) frames. Looping continues until an interrupt
signal is received. The determination of which order to loop, forwards or
backwards, is made as follows: If the last group of frames plotted was in ascending
order loop forward. If the last group of frames plotted was in descending order
loop backwards. If the order cannot be determined don't loop. For example; if loop
mode is set "1 3,4 plot" will result in forward looping, "1 4,3 plot" will result
in backward looping, and "3,4 1 plot" will result in no looping because the last
group of frames plotted, "1", is a single frame.

film [ zaman ]
Display each frame for zaman seconds before proceding to the next frame during
subsequent plots. If zaman is omitted then movie mode is toggled off or on. In the
case the movie mode is toggled on the default time is zero seconds. If movie mode
is toggled to off a newline must be received before advancing to the next frame
during plotting.

sonraki
Multiple files may be specified on the iktrans command line. To edit the next file
in the argument list use the sonraki Komut.

[ Çerçeve ] arsa
Plot the addressed frames. If Çerçeve is omitted then the current frame is plotted
and if possible, the current frame number is incremented. If "movie" mode is set
iktrans bekleyecek zaman seconds after displaying each plot before continuing. zaman
ile ayarlanır film command. If "movie" mode is not set iktrans will wait for a
newline character before advancing to the next frame. arsa will report the number
of frames and the last frame in Çerçeve. Plotting will be terminated and iktrans
will reenter command mode after the last frame is plotted or upon receiving a
interrupt signal, SIGINT.

[ Çerçeve ] Print
The addressed frames are translated and sent to the current spooling device.
Translation is performed by a spawned translator. The biriktirici komut kullanılabilir
to select a spooling device. See ncarv_spool(5NCARG).

çıkmak
Terminate the session.

[ Çerçeve ] kayıt etmek [ meta dosyası ]
Save the addressed frames to meta dosyası. Eğer meta dosyası does not exist then it is
created. Filename substitution is performed on meta dosyası. Eğer meta dosyası atlandı
than the last file saved to is used. If Çerçeve is omitted than the current frame is
Kullanılmış.

[ Çerçeve ] İndirim [ meta dosyası ]
ile aynı kayıt etmek command except İndirim does not confirm its actions with the user in
the case that the file exists. If the file exists but is not a valid NCGM it is
overwritten. If the file exists and is a valid NCGM it is appended to.

atlamak [ numara ]
Set number of frames to skip over during subsequent plotting. For example, if
"skip" is set to 1 and a request is made to plot frames 1 through 10 frames 1, 3,
5, 7, and 9 will be displayed. With no arguments atlamak reports its current value.
The default is zero.

biriktirici [ spooler_alias ]
With no arguments the current spooler alias name is reported. If spooler_alias bir
valid alias either defined by the takma ad command, or in a ncarv_spool yapılandırma
file, or by the NCARV_SPOOL environment variable, then biriktirici takma ad olur
current spooler. Subsequent Print commands will use the spooler definition defined
by the current spooler. See ncarv_spool(5NCARG).

[ başlama çerçeve ] başlama
This command defines the first frame in a segment of frames. başla, Birlikte
the durdurmak command, define the boundaries of a segment of metafile frames. When
iktrans is in loop mode the contents of this segment are repeatedly displayed. The
varsayılan başlama çerçeve is the first frame in the metafile, 1. If no arguments are
verilmiş başlama reports the first frame in the current segment.

[ durdurmak çerçeve ] durdurmak
This command defines the last frame in a segment of frames. The default durdurmak çerçeve
is the last frame in the metafile, $. If no arguments are given durdurmak raporlar
last frame in the current segment.

yakınlaştırma [ llx [ lly [ urx [ Ury ]]]]
The yakınlaştırma command allows for specification of a workstation window (in the GKS
sense). Four coordinates are specified which define a rectangular window which is a
subset of the normalized VDC rectangle with corner points (0.0, 0.0) and (1.0,
1,0). The specified window is then mapped onto the entire viewport. For example

ictrans> yakınlaştırma 0.0 0.0 0.5 0.5

would result in the lower left quarter of subsequent plots being blown up to fill
the entire display. Specification of such a window may be used for zooming and
panning.

Bir grafiğin yakınlaştırılabileceği aralık, tamsayı ile sınırlandırılabilir.
cihazın adresleme hassasiyeti.

ÖRNEKLER


Aşağıdaki örnek nasıl olduğunu gösterir iktrans might be used in a batch mode to translate a
metafile called gmeta and send the translated results of the entire file to a spooled
device called "imagen" which might be defined in the system ncarv_spool Dosya:

% iktrans -e 'spooler imagen' -e '1,$Print' gmeta

ÇEVRE


yazı tipi
Varsayılan font cap belirteci.

GRAFİKAP
Varsayılan çıkış aygıtı belirteci.

NCARG_ROOT
NCAR Graphics kurulumunun kök yolu.

NCARG_LIB
Ayarlanırsa, bu değişken kurulu NCAR Graphics kitaplıklarının yolunu içerir.
NCARG_LIB geçersiz kılmaları NCARG_ROOT.

NCARG_TMP
Ayarlanırsa, bu ortam değişkeni için kullanılacak bir dizin yolu içerir.
geçici dosyalar. Çoğu sistemde varsayılan / Tmp. Bazı sistemlerde varsayılan
is /usr/tmp.

TMPDIR If NCARG_TMP is not set this environment variable specifies the directory path for
scratch disk space. If neither NCARG_TMP TMPDIR is set a site-dependent, hard-coded
default is used.

Use ictransNCARG online using onworks.net services


Ücretsiz Sunucular ve İş İstasyonları

Windows ve Linux uygulamalarını indirin

  • 1
    DivFix + +
    DivFix + +
    DivFix++ size ait AVI video onarımı ve
    önizleme yazılımı. Tamir için tasarlanmıştır
    ve indirilmekte olan dosyaları önizleyin
    ed2k(emule), torrent, gnutella, ftp'den...
    DivFix++'ı indirin
  • 2
    JBoss Topluluğu
    JBoss Topluluğu
    Aşağıdakileri içeren topluluk odaklı projeler
    en son yenilikler
    uygulamalar. Amiral gemisi projemiz JBoss A.Ş.
    önde gelen Açık Kaynak,
    standartlara uygun...
    JBoss Topluluğunu İndirin
  • 3
    Django Dosyalayıcı
    Django Dosyalayıcı
    django Filer bir dosya yönetimidir
    yapan django uygulaması
    dosyaları ve görüntüleri işlemek çocuk oyuncağı.
    django-filer bir dosya yönetimidir
    djang uygulaması...
    Django Filer'ı indirin
  • 4
    xCAT
    xCAT
    Extreme Küme Yönetimi Araç Seti.
    xCAT, ölçeklenebilir bir küme yönetimidir
    ve sağlayan sağlama aracı
    donanım kontrolü, keşif ve işletim sistemi
    disk dolu/di...
    xCAT'i indirin
  • 5
    Psi
    Psi
    Psi, platformlar arası güçlü XMPP'dir
    deneyimli kullanıcılar için tasarlanmış istemci.
    MS için mevcut yapılar var
    Windows, GNU/Linux ve macOS.. Kitle:
    Son kullanıcılar...
    Psi'yi indirin
  • 6
    Blobby Voleybolu 2
    Blobby Voleybolu 2
    Ünlülerin resmi devamı
    Blobby Volley 1.x arcade oyunu..
    Kitle: Son Kullanıcılar/Masaüstü. kullanıcı
    arayüz: OpenGL, SDL. Programlama
    Dil: C++, Lua. C...
    Blobby Volley 2'yi İndirin
  • Daha fazla »

Linux komutları

Ad