This is the command ao-rawload that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
ao-rawload - flash a program to a AltOS device
SYNOPSIS
ao-rawload [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device]
file.ihx
DESCRIPTION
ao-rawload loads the specified .ihx file, without modification, into the target device
flash or ram (depending on the base address of the .ihx file).
OPTIONS
-T tty-device | --tty tty-device
This selects which tty device the debugger uses to communicate with the target
device. The special name 'BITBANG' directs ao-dbg to use the cp2103 connection,
otherwise this should be a usb serial port connected to a suitable cc1111 debug
node.
-D AltOS-device | --device AltOS-device
Search for a connected device. This requires an argument of one of the following
forms:
TeleMetrum:2
TeleMetrum
2
Leaving out the product name will cause the tool to select a suitable product,
leaving out the serial number will cause the tool to match one of the available
devices.
-r | --run
After the file has been loaded, set the PC to the base address of the image and
resume execution there. the .ihx file.
USAGE
ao-rawload reads the specified .ihx file into memory. It then connects to the specified
target device and writes the program to the target device memory and, optionally, starts
the program executing.
Use ao-rawload online using onworks.net services
