EnglishFrenchSpanish

Ad


OnWorks favicon

dictzip - Online in the Cloud

Run dictzip in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command dictzip that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


dictzip, dictunzip - compress (or expand) files, allowing random access

SYNOPSIS


dictzip [options] name
dictunzip [options] name

DESCRIPTION


dictzip compresses files using the gzip(1) algorithm (LZ77) in a manner which is
completely compatible with the gzip file format. An extension to the gzip file format
(Extra Field, described in 2.3.1.1 of RFC 1952) allows extra data to be stored in the
header of a compressed file. Programs like gzip and zcat will ignore this extra data.
However, dictd(8), the DICT protocol dictionary server will make use of this data to
perform pseudo-random access on the file. Files in the dictzip format should end in ".dz"
so that they may be distinguished from common gzip files that do not contain the special
header information.

From RFC 1952, the extra field is specified as follows:

If the FLG.FEXTRA bit is set, an "extra field" is present in the header, with total
length XLEN bytes. It consists of a series of subfields, each of the form:

+---+---+---+---+==================================+
|SI1|SI2| LEN |... LEN bytes of subfield data ...|
+---+---+---+---+==================================+

SI1 and SI2 provide a subfield ID, typically two ASCII letters with some mnemonic
value. Jean-Loup Gailly <[email protected]> is maintaining a registry of
subfield IDs; please send him any subfield ID you wish to use. Subfield IDs with
SI2 = 0 are reserved for future use.

LEN gives the length of the subfield data, excluding the 4 initial bytes.

The dictzip program uses 'R' for SI1, and 'A' for SI2 (i.e., "Random Access"). After the
LEN field, the data is arranged as follows:

+---+---+---+---+---+---+===============================+
| VER | CHLEN | CHCNT | ... CHCNT words of data ... |
+---+---+---+---+---+---+===============================+

As per RFC 1952, all data is stored least-significant byte first. For VER 1 of the data,
all values are 16-bits long (2 bytes), and are unsigned integers.

XLEN (which is specified earlier in the header) is a two byte integer, so the extra field
can be 0xffff bytes long, 2 bytes of which are used for the subfield ID (SI1 and SI1), and
2 bytes of which are used for the subfield length (LEN). This leaves 0xfffb bytes (0x7ffd
2-byte entries or 0x3ffe 4-byte entries). Given that the zip output buffer must be 10% +
12 bytes larger than the input buffer, we can store 58969 bytes per entry, or about 1.8GB
if the 2-byte entries are used. If this becomes a limiting factor, another format version
can be selected and defined for 4-byte entries.

For compression, the file is divided up into "chunks" of data, each chunk is less than
64kB, and can be compressed into an area that is also less than 64kB long (taking
incompressible data into account -- usually the data is compressed into a block that is
much smaller than the original). The CHLEN field specifies the length of a "chunk" of
data. The CHCNT field specifies how many chunks are preset, and the CHCNT words of data
specifies how long each chunk is after compression (i.e., in the current compressed file).

To perform random access on the data, the offset and length of the data are provided to
library routines. These routines determine the chunk in which the desired data begins,
and decompresses that chunk. Consecutive chunks are decompressed as necessary.

TRADEOFFS


Speed True random file access is not realized, since any access, even for a single byte,
requires that a 64kB chunk be read and decompressed. This is slower than accessing
a flat text file, but is much, much faster than performing serial access on a fully
compressed file.

Space For the textual dictionary databases we are working with, the use of 64kB chunks
and maximal LZ77 compression realizes a file which is only about 4% larger than the
same file compressed all at once.

OPTIONS


-d or --decompress
Decompress. This is the default if the executable is called dictunzip.

-c or --stdout
Write output on standard output; keep original files unchanged. This is only
available when decompressing (because parts of the header must be updated after a
write when compressing).

-f or --force
Force compression or decompression even if the output file already exists.

-h or --help
Display help.

-k or --keep
Do not delete the original file.

-l or --list
For each compressed file, list the following fields:

type: dzip, gzip, or text (includes files in unknown formats)
crc: CRC checksum
date and time: from header
chunks: number of chunks in file
size: size of each uncompressed chunk
compr.: compressed size
uncompr.: uncompressed size
ratio: compression ratio (0.0% if unknown)
name: name of uncompressed file

Unlike gzip, the compression method is not detected.

-L or --license
Display the dictzip license and quit.

-t or --test
Check the compressed file integrity. This option is not implemented. Instead, it
will list the header information.

-v or --verbose
Verbose. Display extra information during compression.

-V or --version
Version. Display the version number and compilation options then quit.

-s start or --start start
Specify the offer to start decompression, using decimal numbers. The default is at
the beginning of the file.

-e size or --size size
Specify the size of the portion of the file to decompress, using decimal numbers.
The default is the whole file.

-S start or --Start start
Specify the offer to start decompression, using base64 numbers. The default is at
the beginning of the file.

-E size or --Size start
Specify the size of the portion of the file to decompress, using base64 numbers.
The default is the whole file.

-p prefilter or --pre prefilter
Specify a shell command to execute as a filter before compression or decompression
of a chunk. The pre- and post-compression filters can be used to provide
additional compression or output formatting. The filters may not increase the
buffer size significantly. The pre- and post-compression filters were designed to
provide the most general interface possible.

-P postfilter or --post postfilter
Specify a shell command to execute as a filter after compression or decompression.

CREDITS


dictzip was written by Rik Faith ([email protected]) and is distributed under the terms of
the GNU General Public License. If you need to distribute under other terms, write to the
author.

The main libraries used by this programs (zlib, regex, libmaa) are distributed under
different terms, so you may be able to use the libraries for applications which are
incompatible with the GPL -- please see the copyright notices and license information that
come with the libraries for more information, and consult with your attorney to resolve
these issues.

Use dictzip online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    Phaser
    Phaser
    Phaser is a fast, free, and fun open
    source HTML5 game framework that offers
    WebGL and Canvas rendering across
    desktop and mobile web browsers. Games
    can be co...
    Download Phaser
  • 2
    VASSAL Engine
    VASSAL Engine
    VASSAL is a game engine for creating
    electronic versions of traditional board
    and card games. It provides support for
    game piece rendering and interaction,
    and...
    Download VASSAL Engine
  • 3
    OpenPDF - Fork of iText
    OpenPDF - Fork of iText
    OpenPDF is a Java library for creating
    and editing PDF files with a LGPL and
    MPL open source license. OpenPDF is the
    LGPL/MPL open source successor of iText,
    a...
    Download OpenPDF - Fork of iText
  • 4
    SAGA GIS
    SAGA GIS
    SAGA - System for Automated
    Geoscientific Analyses - is a Geographic
    Information System (GIS) software with
    immense capabilities for geodata
    processing and ana...
    Download SAGA GIS
  • 5
    Toolbox for Java/JTOpen
    Toolbox for Java/JTOpen
    The IBM Toolbox for Java / JTOpen is a
    library of Java classes supporting the
    client/server and internet programming
    models to a system running OS/400,
    i5/OS, o...
    Download Toolbox for Java/JTOpen
  • 6
    D3.js
    D3.js
    D3.js (or D3 for Data-Driven Documents)
    is a JavaScript library that allows you
    to produce dynamic, interactive data
    visualizations in web browsers. With D3
    you...
    Download D3.js
  • More »

Linux commands

Ad