This is the command esreverse that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
esreverse - reverse an es stream
SYNOPSIS
esreverse [switches] <infile> <outfile>
DESCRIPTION
TS tools version 1.11, esreverse built Nov 11 2008 17:15:47
Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or H.262
(MPEG-2) elementary stream.
If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
and video PID (0x68) are used.
Files:
<infile>
is the input elementary stream.
<outfile> is the output stream, either an equivalent elementary
stream, or an H.222 Transport Stream (but see -stdout and -host below).
Switches:
-verbose, -v
Output additional (debugging) messages
-quiet, -q
Only output error messages
-stdout
Write output to <stdout>, instead of a named file Forces -quiet.
-host <host>, -host <host>:<port>
Writes output (over TCP/IP) to the named <host>, instead of to a named file. If
<port> is not specified, it defaults to 88. Implies -tsout.
-max <n>, -m <n>
Maximum number of frames to read
-freq <n>
Specify the frequency of frames to try to keep when reversing. Defaults to 8.
-tsout Output H.222 Transport Stream
-pes, -ts
The input file is TS or PS, to be read via the PES->ES reading mechanisms
-server
Also output as normal forward video as reversal data is being collected. Implies
-pes and -tsout.
-x Temporary extra debugging information
Stream type:
If input is from a file, then the program will look at the start of the file to
determine if the stream is H.264 or H.262 data. This process may occasionally come
to the wrong conclusion, in which case the user can override the choice using the
following switches.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
TS tools version 1.11, esreverse built Nov 11 2008 17:15:47
Output a reversed stream derived from the input H.264 (MPEG-4/AVC) or H.262
(MPEG-2) elementary stream.
If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
and video PID (0x68) are used.
Files:
<infile>
is the input elementary stream.
<outfile> is the output stream, either an equivalent elementary
stream, or an H.222 Transport Stream (but see -stdout and -host below).
Switches:
-verbose, -v
Output additional (debugging) messages
-quiet, -q
Only output error messages
-stdout
Write output to <stdout>, instead of a named file Forces -quiet.
-host <host>, -host <host>:<port>
Writes output (over TCP/IP) to the named <host>, instead of to a named file. If
<port> is not specified, it defaults to 88. Implies -tsout.
-max <n>, -m <n>
Maximum number of frames to read
-freq <n>
Specify the frequency of frames to try to keep when reversing. Defaults to 8.
-tsout Output H.222 Transport Stream
-pes, -ts
The input file is TS or PS, to be read via the PES->ES reading mechanisms
-server
Also output as normal forward video as reversal data is being collected. Implies
-pes and -tsout.
-x Temporary extra debugging information
Stream type:
If input is from a file, then the program will look at the start of the file to
determine if the stream is H.264 or H.262 data. This process may occasionally come
to the wrong conclusion, in which case the user can override the choice using the
following switches.
-h264, -avc
Force the program to treat the input as MPEG-4/AVC.
-h262 Force the program to treat the input as MPEG-2.
Use esreverse online using onworks.net services
