OnWorks favicon

lcdproc - Online in the Cloud

Run lcdproc in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command lcdproc that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator



lcdproc - system status information client


lcdproc [-hfv] [-c config] [-s host] [-p port] [-e delay] [screen ...]


lcdproc is the client in the LCDproc suite that displays information about the local
system's status on an LCD that is connected to an LCDd server daemon.

Due to the client-server architecture it does not matter whether the LCDd daemon runs on
the local machine or on a remote system.

Most settings of lcdproc are configured through its configuration file /etc/lcdproc.conf,
some of them can be overridden using command line options.

Before running lcdproc you should carefully read through that file and modify the settings
therein according to your needs.

When compiled appropriately, some aspects of lcdproc can even configured at run time using
a menu on the LCD.

Currently, only Linux, the BSD variants FreeBSD, NetBSD, OpenBSD and Darwin as well as
Solaris are supported, but not all features may be available on all platforms.


lcdproc understands these command line options:

-c config
Use a configuration file other than /etc/LCDd.conf

-s host
Connect to the LCDd server on host, instead to the one listed in te Server
parameter in the config file's [lcdproc] section. If not given here and not
specified in the config file or if the default config file does not exist, it
defaults to 'localhost.

-p port
Use port port when connecting to the LCDd server on host. This option overrides
the Port parameter in the config file's [lcdproc] section. Without a default
config file or when not set in the config file, it defaults to the LCDproc port

-f Run in the foreground, overriding the Foreground parameter in the config file's
[lcdproc] section. The default, if not in the config file or without a config
file, is to daemonize lcdproc as it is intended to display the system information
in the background.

-e delay
Sleep delay in 100ths of seconds between updating screens in an update cycle. This
option overrides the Delay parameter in the config file's [lcdproc] section. When
not given and not in the config file, it defaults to 0.

-h Show help screen.

-v Print the version of lcdproc and exit.

screen can be one of the following:

C CPU show detailed CPU usage

P SMP-CPU CPU usage overview: one line per CPU, especially useful on SMP

G CPUGraph CPU histogram

L Load Load histogram

M Memory memory & swap usage

S ProcSize memory usage of 5 biggest processes

D Disk filling level of the mounted file systems

I Iface network interface usage

B Battery battery status

T TimeDate time & date information

O OldTime old time screen

U Uptime uptime screen

K BigClock big clock

N MiniClock minimal clock

A About credits page

On the command line you may either use the short or the long screen name. In the
config file, the long names are used as section labels to configure the screens

You may also prefix the screen names with an exclamation mark '!' to disable a
screen that was activated in the config file instead of activating a disabled one.


lcdproc C M D '!L'

With the command line specified above, lcdproc loads the default configuration file,
connects to the LCDd server specified therein and then displays the following screens in
addition to those activated in the configuration file on the LCD:

* detailed CPU Usage

* Memory & swap usage

* filling level of the mounted file systems


* Load histogram

screen is disabled and therefore not shown in the display. (The quotes are not part of
lcdproc's command line syntax; they are required to disable special interpretation of the
exclamation mark by the shell).

Use lcdproc online using onworks.net services

Free Servers & Workstations

Download Windows & Linux apps

  • 1
    The strace project has been moved to
    https://strace.io. strace is a
    diagnostic, debugging and instructional
    userspace tracer for Linux. It is used
    to monitor a...
    Download strace
  • 2
    A GUI for mkvextract utility (part of
    MKVToolNix) which incorporates most (if
    not all) functionality of mkvextract and
    mkvinfo utilities. Written in C#NET 4.0,...
    Download gMKVExtractGUI
  • 3
    JasperReports Library
    JasperReports Library
    JasperReports Library is the
    world's most popular open source
    business intelligence and reporting
    engine. It is entirely written in Java
    and it is able to ...
    Download JasperReports Library
  • 4
    Frappe Books
    Frappe Books
    Frappe Books is a free and open source
    desktop book-keeping software that's
    simple and well-designed to be used by
    small businesses and freelancers. It'...
    Download Frappe Books
  • 5
    Numerical Python
    Numerical Python
    NEWS: NumPy 1.11.2 is the last release
    that will be made on sourceforge. Wheels
    for Windows, Mac, and Linux as well as
    archived source distributions can be fou...
    Download Numerical Python
  • 6
    CMU Sphinx
    CMU Sphinx
    CMUSphinx is a speaker-independent large
    vocabulary continuous speech recognizer
    released under BSD style license. It is
    also a collection of open source tools ...
    Download CMU Sphinx
  • 7
    Old Feren OS Repositories
    Old Feren OS Repositories
    This was the Official Repository for
    Feren OS. To add the latest one, run
    this command: (16.04-based) echo
    "deb ...
    Download Old Feren OS Repositories
  • More »

Linux commands