EnglishFrenchSpanish

OnWorks favicon

perlpacktut - Online in the Cloud

Run perlpacktut in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command perlpacktut that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


perlpacktut - tutorial on "pack" and "unpack"

DESCRIPTION


"pack" and "unpack" are two functions for transforming data according to a user-defined
template, between the guarded way Perl stores values and some well-defined representation
as might be required in the environment of a Perl program. Unfortunately, they're also two
of the most misunderstood and most often overlooked functions that Perl provides. This
tutorial will demystify them for you.

The Basic Principle


Most programming languages don't shelter the memory where variables are stored. In C, for
instance, you can take the address of some variable, and the "sizeof" operator tells you
how many bytes are allocated to the variable. Using the address and the size, you may
access the storage to your heart's content.

In Perl, you just can't access memory at random, but the structural and representational
conversion provided by "pack" and "unpack" is an excellent alternative. The "pack"
function converts values to a byte sequence containing representations according to a
given specification, the so-called "template" argument. "unpack" is the reverse process,
deriving some values from the contents of a string of bytes. (Be cautioned, however, that
not all that has been packed together can be neatly unpacked - a very common experience as
seasoned travellers are likely to confirm.)

Why, you may ask, would you need a chunk of memory containing some values in binary
representation? One good reason is input and output accessing some file, a device, or a
network connection, whereby this binary representation is either forced on you or will
give you some benefit in processing. Another cause is passing data to some system call
that is not available as a Perl function: "syscall" requires you to provide parameters
stored in the way it happens in a C program. Even text processing (as shown in the next
section) may be simplified with judicious usage of these two functions.

To see how (un)packing works, we'll start with a simple template code where the conversion
is in low gear: between the contents of a byte sequence and a string of hexadecimal
digits. Let's use "unpack", since this is likely to remind you of a dump program, or some
desperate last message unfortunate programs are wont to throw at you before they expire
into the wild blue yonder. Assuming that the variable $mem holds a sequence of bytes that
we'd like to inspect without assuming anything about its meaning, we can write

my( $hex ) = unpack( 'H*', $mem );
print "$hex\n";

whereupon we might see something like this, with each pair of hex digits corresponding to
a byte:

41204d414e204120504c414e20412043414e414c2050414e414d41

What was in this chunk of memory? Numbers, characters, or a mixture of both? Assuming that
we're on a computer where ASCII (or some similar) encoding is used: hexadecimal values in
the range 0x40 - 0x5A indicate an uppercase letter, and 0x20 encodes a space. So we might
assume it is a piece of text, which some are able to read like a tabloid; but others will
have to get hold of an ASCII table and relive that firstgrader feeling. Not caring too
much about which way to read this, we note that "unpack" with the template code "H"
converts the contents of a sequence of bytes into the customary hexadecimal notation.
Since "a sequence of" is a pretty vague indication of quantity, "H" has been defined to
convert just a single hexadecimal digit unless it is followed by a repeat count. An
asterisk for the repeat count means to use whatever remains.

The inverse operation - packing byte contents from a string of hexadecimal digits - is
just as easily written. For instance:

my $s = pack( 'H2' x 10, 30..39 );
print "$s\n";

Since we feed a list of ten 2-digit hexadecimal strings to "pack", the pack template
should contain ten pack codes. If this is run on a computer with ASCII character coding,
it will print 0123456789.

Packing Text


Let's suppose you've got to read in a data file like this:

Date |Description | Income|Expenditure
01/24/2001 Zed's Camel Emporium 1147.99
01/28/2001 Flea spray 24.99
01/29/2001 Camel rides to tourists 235.00

How do we do it? You might think first to use "split"; however, since "split" collapses
blank fields, you'll never know whether a record was income or expenditure. Oops. Well,
you could always use "substr":

while (<>) {
my $date = substr($_, 0, 11);
my $desc = substr($_, 12, 27);
my $income = substr($_, 40, 7);
my $expend = substr($_, 52, 7);
...
}

It's not really a barrel of laughs, is it? In fact, it's worse than it may seem; the
eagle-eyed may notice that the first field should only be 10 characters wide, and the
error has propagated right through the other numbers - which we've had to count by hand.
So it's error-prone as well as horribly unfriendly.

Or maybe we could use regular expressions:

while (<>) {
my($date, $desc, $income, $expend) =
m|(\d\d/\d\d/\d{4}) (.{27}) (.{7})(.*)|;
...
}

Urgh. Well, it's a bit better, but - well, would you want to maintain that?

Hey, isn't Perl supposed to make this sort of thing easy? Well, it does, if you use the
right tools. "pack" and "unpack" are designed to help you out when dealing with fixed-
width data like the above. Let's have a look at a solution with "unpack":

while (<>) {
my($date, $desc, $income, $expend) = unpack("A10xA27xA7A*", $_);
...
}

That looks a bit nicer; but we've got to take apart that weird template. Where did I pull
that out of?

OK, let's have a look at some of our data again; in fact, we'll include the headers, and a
handy ruler so we can keep track of where we are.

1 2 3 4 5
1234567890123456789012345678901234567890123456789012345678
Date |Description | Income|Expenditure
01/28/2001 Flea spray 24.99
01/29/2001 Camel rides to tourists 235.00

From this, we can see that the date column stretches from column 1 to column 10 - ten
characters wide. The "pack"-ese for "character" is "A", and ten of them are "A10". So if
we just wanted to extract the dates, we could say this:

my($date) = unpack("A10", $_);

OK, what's next? Between the date and the description is a blank column; we want to skip
over that. The "x" template means "skip forward", so we want one of those. Next, we have
another batch of characters, from 12 to 38. That's 27 more characters, hence "A27". (Don't
make the fencepost error - there are 27 characters between 12 and 38, not 26. Count 'em!)

Now we skip another character and pick up the next 7 characters:

my($date,$description,$income) = unpack("A10xA27xA7", $_);

Now comes the clever bit. Lines in our ledger which are just income and not expenditure
might end at column 46. Hence, we don't want to tell our "unpack" pattern that we need to
find another 12 characters; we'll just say "if there's anything left, take it". As you
might guess from regular expressions, that's what the "*" means: "use everything
remaining".

· Be warned, though, that unlike regular expressions, if the "unpack" template doesn't
match the incoming data, Perl will scream and die.

Hence, putting it all together:

my ($date, $description, $income, $expend) =
unpack("A10xA27xA7xA*", $_);

Now, that's our data parsed. I suppose what we might want to do now is total up our income
and expenditure, and add another line to the end of our ledger - in the same format -
saying how much we've brought in and how much we've spent:

while (<>) {
my ($date, $desc, $income, $expend) =
unpack("A10xA27xA7xA*", $_);
$tot_income += $income;
$tot_expend += $expend;
}

$tot_income = sprintf("%.2f", $tot_income); # Get them into
$tot_expend = sprintf("%.2f", $tot_expend); # "financial" format

$date = POSIX::strftime("%m/%d/%Y", localtime);

# OK, let's go:

print pack("A10xA27xA7xA*", $date, "Totals",
$tot_income, $tot_expend);

Oh, hmm. That didn't quite work. Let's see what happened:

01/24/2001 Zed's Camel Emporium 1147.99
01/28/2001 Flea spray 24.99
01/29/2001 Camel rides to tourists 1235.00
03/23/2001Totals 1235.001172.98

OK, it's a start, but what happened to the spaces? We put "x", didn't we? Shouldn't it
skip forward? Let's look at what "pack" in perlfunc says:

x A null byte.

Urgh. No wonder. There's a big difference between "a null byte", character zero, and "a
space", character 32. Perl's put something between the date and the description - but
unfortunately, we can't see it!

What we actually need to do is expand the width of the fields. The "A" format pads any
non-existent characters with spaces, so we can use the additional spaces to line up our
fields, like this:

print pack("A11 A28 A8 A*", $date, "Totals",
$tot_income, $tot_expend);

(Note that you can put spaces in the template to make it more readable, but they don't
translate to spaces in the output.) Here's what we got this time:

01/24/2001 Zed's Camel Emporium 1147.99
01/28/2001 Flea spray 24.99
01/29/2001 Camel rides to tourists 1235.00
03/23/2001 Totals 1235.00 1172.98

That's a bit better, but we still have that last column which needs to be moved further
over. There's an easy way to fix this up: unfortunately, we can't get "pack" to right-
justify our fields, but we can get "sprintf" to do it:

$tot_income = sprintf("%.2f", $tot_income);
$tot_expend = sprintf("%12.2f", $tot_expend);
$date = POSIX::strftime("%m/%d/%Y", localtime);
print pack("A11 A28 A8 A*", $date, "Totals",
$tot_income, $tot_expend);

This time we get the right answer:

01/28/2001 Flea spray 24.99
01/29/2001 Camel rides to tourists 1235.00
03/23/2001 Totals 1235.00 1172.98

So that's how we consume and produce fixed-width data. Let's recap what we've seen of
"pack" and "unpack" so far:

· Use "pack" to go from several pieces of data to one fixed-width version; use "unpack"
to turn a fixed-width-format string into several pieces of data.

· The pack format "A" means "any character"; if you're "pack"ing and you've run out of
things to pack, "pack" will fill the rest up with spaces.

· "x" means "skip a byte" when "unpack"ing; when "pack"ing, it means "introduce a null
byte" - that's probably not what you mean if you're dealing with plain text.

· You can follow the formats with numbers to say how many characters should be affected
by that format: "A12" means "take 12 characters"; "x6" means "skip 6 bytes" or
"character 0, 6 times".

· Instead of a number, you can use "*" to mean "consume everything else left".

Warning: when packing multiple pieces of data, "*" only means "consume all of the
current piece of data". That's to say

pack("A*A*", $one, $two)

packs all of $one into the first "A*" and then all of $two into the second. This is a
general principle: each format character corresponds to one piece of data to be
"pack"ed.

Packing Numbers


So much for textual data. Let's get onto the meaty stuff that "pack" and "unpack" are best
at: handling binary formats for numbers. There is, of course, not just one binary format
- life would be too simple - but Perl will do all the finicky labor for you.

Integers
Packing and unpacking numbers implies conversion to and from some specific binary
representation. Leaving floating point numbers aside for the moment, the salient
properties of any such representation are:

· the number of bytes used for storing the integer,

· whether the contents are interpreted as a signed or unsigned number,

· the byte ordering: whether the first byte is the least or most significant byte (or:
little-endian or big-endian, respectively).

So, for instance, to pack 20302 to a signed 16 bit integer in your computer's
representation you write

my $ps = pack( 's', 20302 );

Again, the result is a string, now containing 2 bytes. If you print this string (which is,
generally, not recommended) you might see "ON" or "NO" (depending on your system's byte
ordering) - or something entirely different if your computer doesn't use ASCII character
encoding. Unpacking $ps with the same template returns the original integer value:

my( $s ) = unpack( 's', $ps );

This is true for all numeric template codes. But don't expect miracles: if the packed
value exceeds the allotted byte capacity, high order bits are silently discarded, and
unpack certainly won't be able to pull them back out of some magic hat. And, when you pack
using a signed template code such as "s", an excess value may result in the sign bit
getting set, and unpacking this will smartly return a negative value.

16 bits won't get you too far with integers, but there is "l" and "L" for signed and
unsigned 32-bit integers. And if this is not enough and your system supports 64 bit
integers you can push the limits much closer to infinity with pack codes "q" and "Q". A
notable exception is provided by pack codes "i" and "I" for signed and unsigned integers
of the "local custom" variety: Such an integer will take up as many bytes as a local C
compiler returns for "sizeof(int)", but it'll use at least 32 bits.

Each of the integer pack codes "sSlLqQ" results in a fixed number of bytes, no matter
where you execute your program. This may be useful for some applications, but it does not
provide for a portable way to pass data structures between Perl and C programs (bound to
happen when you call XS extensions or the Perl function "syscall"), or when you read or
write binary files. What you'll need in this case are template codes that depend on what
your local C compiler compiles when you code "short" or "unsigned long", for instance.
These codes and their corresponding byte lengths are shown in the table below. Since the
C standard leaves much leeway with respect to the relative sizes of these data types,
actual values may vary, and that's why the values are given as expressions in C and Perl.
(If you'd like to use values from %Config in your program you have to import it with "use
Config".)

signed unsigned byte length in C byte length in Perl
s! S! sizeof(short) $Config{shortsize}
i! I! sizeof(int) $Config{intsize}
l! L! sizeof(long) $Config{longsize}
q! Q! sizeof(long long) $Config{longlongsize}

The "i!" and "I!" codes aren't different from "i" and "I"; they are tolerated for
completeness' sake.

Unpacking a Stack Frame
Requesting a particular byte ordering may be necessary when you work with binary data
coming from some specific architecture whereas your program could run on a totally
different system. As an example, assume you have 24 bytes containing a stack frame as it
happens on an Intel 8086:

+---------+ +----+----+ +---------+
TOS: | IP | TOS+4:| FL | FH | FLAGS TOS+14:| SI |
+---------+ +----+----+ +---------+
| CS | | AL | AH | AX | DI |
+---------+ +----+----+ +---------+
| BL | BH | BX | BP |
+----+----+ +---------+
| CL | CH | CX | DS |
+----+----+ +---------+
| DL | DH | DX | ES |
+----+----+ +---------+

First, we note that this time-honored 16-bit CPU uses little-endian order, and that's why
the low order byte is stored at the lower address. To unpack such a (unsigned) short we'll
have to use code "v". A repeat count unpacks all 12 shorts:

my( $ip, $cs, $flags, $ax, $bx, $cd, $dx, $si, $di, $bp, $ds, $es ) =
unpack( 'v12', $frame );

Alternatively, we could have used "C" to unpack the individually accessible byte registers
FL, FH, AL, AH, etc.:

my( $fl, $fh, $al, $ah, $bl, $bh, $cl, $ch, $dl, $dh ) =
unpack( 'C10', substr( $frame, 4, 10 ) );

It would be nice if we could do this in one fell swoop: unpack a short, back up a little,
and then unpack 2 bytes. Since Perl is nice, it proffers the template code "X" to back up
one byte. Putting this all together, we may now write:

my( $ip, $cs,
$flags,$fl,$fh,
$ax,$al,$ah, $bx,$bl,$bh, $cx,$cl,$ch, $dx,$dl,$dh,
$si, $di, $bp, $ds, $es ) =
unpack( 'v2' . ('vXXCC' x 5) . 'v5', $frame );

(The clumsy construction of the template can be avoided - just read on!)

We've taken some pains to construct the template so that it matches the contents of our
frame buffer. Otherwise we'd either get undefined values, or "unpack" could not unpack
all. If "pack" runs out of items, it will supply null strings (which are coerced into
zeroes whenever the pack code says so).

How to Eat an Egg on a Net
The pack code for big-endian (high order byte at the lowest address) is "n" for 16 bit and
"N" for 32 bit integers. You use these codes if you know that your data comes from a
compliant architecture, but, surprisingly enough, you should also use these pack codes if
you exchange binary data, across the network, with some system that you know next to
nothing about. The simple reason is that this order has been chosen as the network order,
and all standard-fearing programs ought to follow this convention. (This is, of course, a
stern backing for one of the Lilliputian parties and may well influence the political
development there.) So, if the protocol expects you to send a message by sending the
length first, followed by just so many bytes, you could write:

my $buf = pack( 'N', length( $msg ) ) . $msg;

or even:

my $buf = pack( 'NA*', length( $msg ), $msg );

and pass $buf to your send routine. Some protocols demand that the count should include
the length of the count itself: then just add 4 to the data length. (But make sure to read
"Lengths and Widths" before you really code this!)

Byte-order modifiers
In the previous sections we've learned how to use "n", "N", "v" and "V" to pack and unpack
integers with big- or little-endian byte-order. While this is nice, it's still rather
limited because it leaves out all kinds of signed integers as well as 64-bit integers. For
example, if you wanted to unpack a sequence of signed big-endian 16-bit integers in a
platform-independent way, you would have to write:

my @data = unpack 's*', pack 'S*', unpack 'n*', $buf;

This is ugly. As of Perl 5.9.2, there's a much nicer way to express your desire for a
certain byte-order: the ">" and "<" modifiers. ">" is the big-endian modifier, while "<"
is the little-endian modifier. Using them, we could rewrite the above code as:

my @data = unpack 's>*', $buf;

As you can see, the "big end" of the arrow touches the "s", which is a nice way to
remember that ">" is the big-endian modifier. The same obviously works for "<", where the
"little end" touches the code.

You will probably find these modifiers even more useful if you have to deal with big- or
little-endian C structures. Be sure to read "Packing and Unpacking C Structures" for more
on that.

Floating point Numbers
For packing floating point numbers you have the choice between the pack codes "f", "d",
"F" and "D". "f" and "d" pack into (or unpack from) single-precision or double-precision
representation as it is provided by your system. If your systems supports it, "D" can be
used to pack and unpack ("long double") values, which can offer even more resolution than
"f" or "d". Note that there are different long double formats.

"F" packs an "NV", which is the floating point type used by Perl internally.

There is no such thing as a network representation for reals, so if you want to send your
real numbers across computer boundaries, you'd better stick to text representation,
possibly using the hexadecimal float format (avoiding the decimal conversion loss), unless
you're absolutely sure what's on the other end of the line. For the even more
adventuresome, you can use the byte-order modifiers from the previous section also on
floating point codes.

Exotic Templates


Bit Strings
Bits are the atoms in the memory world. Access to individual bits may have to be used
either as a last resort or because it is the most convenient way to handle your data. Bit
string (un)packing converts between strings containing a series of 0 and 1 characters and
a sequence of bytes each containing a group of 8 bits. This is almost as simple as it
sounds, except that there are two ways the contents of a byte may be written as a bit
string. Let's have a look at an annotated byte:

7 6 5 4 3 2 1 0
+-----------------+
| 1 0 0 0 1 1 0 0 |
+-----------------+
MSB LSB

It's egg-eating all over again: Some think that as a bit string this should be written
"10001100" i.e. beginning with the most significant bit, others insist on "00110001".
Well, Perl isn't biased, so that's why we have two bit string codes:

$byte = pack( 'B8', '10001100' ); # start with MSB
$byte = pack( 'b8', '00110001' ); # start with LSB

It is not possible to pack or unpack bit fields - just integral bytes. "pack" always
starts at the next byte boundary and "rounds up" to the next multiple of 8 by adding zero
bits as required. (If you do want bit fields, there is "vec" in perlfunc. Or you could
implement bit field handling at the character string level, using split, substr, and
concatenation on unpacked bit strings.)

To illustrate unpacking for bit strings, we'll decompose a simple status register (a "-"
stands for a "reserved" bit):

+-----------------+-----------------+
| S Z - A - P - C | - - - - O D I T |
+-----------------+-----------------+
MSB LSB MSB LSB

Converting these two bytes to a string can be done with the unpack template 'b16'. To
obtain the individual bit values from the bit string we use "split" with the "empty"
separator pattern which dissects into individual characters. Bit values from the
"reserved" positions are simply assigned to "undef", a convenient notation for "I don't
care where this goes".

($carry, undef, $parity, undef, $auxcarry, undef, $zero, $sign,
$trace, $interrupt, $direction, $overflow) =
split( //, unpack( 'b16', $status ) );

We could have used an unpack template 'b12' just as well, since the last 4 bits can be
ignored anyway.

Uuencoding
Another odd-man-out in the template alphabet is "u", which packs a "uuencoded string".
("uu" is short for Unix-to-Unix.) Chances are that you won't ever need this encoding
technique which was invented to overcome the shortcomings of old-fashioned transmission
mediums that do not support other than simple ASCII data. The essential recipe is simple:
Take three bytes, or 24 bits. Split them into 4 six-packs, adding a space (0x20) to each.
Repeat until all of the data is blended. Fold groups of 4 bytes into lines no longer than
60 and garnish them in front with the original byte count (incremented by 0x20) and a "\n"
at the end. - The "pack" chef will prepare this for you, a la minute, when you select pack
code "u" on the menu:

my $uubuf = pack( 'u', $bindat );

A repeat count after "u" sets the number of bytes to put into an uuencoded line, which is
the maximum of 45 by default, but could be set to some (smaller) integer multiple of
three. "unpack" simply ignores the repeat count.

Doing Sums
An even stranger template code is "%"<number>. First, because it's used as a prefix to
some other template code. Second, because it cannot be used in "pack" at all, and third,
in "unpack", doesn't return the data as defined by the template code it precedes. Instead
it'll give you an integer of number bits that is computed from the data value by doing
sums. For numeric unpack codes, no big feat is achieved:

my $buf = pack( 'iii', 100, 20, 3 );
print unpack( '%32i3', $buf ), "\n"; # prints 123

For string values, "%" returns the sum of the byte values saving you the trouble of a sum
loop with "substr" and "ord":

print unpack( '%32A*', "\x01\x10" ), "\n"; # prints 17

Although the "%" code is documented as returning a "checksum": don't put your trust in
such values! Even when applied to a small number of bytes, they won't guarantee a
noticeable Hamming distance.

In connection with "b" or "B", "%" simply adds bits, and this can be put to good use to
count set bits efficiently:

my $bitcount = unpack( '%32b*', $mask );

And an even parity bit can be determined like this:

my $evenparity = unpack( '%1b*', $mask );

Unicode
Unicode is a character set that can represent most characters in most of the world's
languages, providing room for over one million different characters. Unicode 3.1 specifies
94,140 characters: The Basic Latin characters are assigned to the numbers 0 - 127. The
Latin-1 Supplement with characters that are used in several European languages is in the
next range, up to 255. After some more Latin extensions we find the character sets from
languages using non-Roman alphabets, interspersed with a variety of symbol sets such as
currency symbols, Zapf Dingbats or Braille. (You might want to visit
<http://www.unicode.org/> for a look at some of them - my personal favourites are Telugu
and Kannada.)

The Unicode character sets associates characters with integers. Encoding these numbers in
an equal number of bytes would more than double the requirements for storing texts written
in Latin alphabets. The UTF-8 encoding avoids this by storing the most common (from a
western point of view) characters in a single byte while encoding the rarer ones in three
or more bytes.

Perl uses UTF-8, internally, for most Unicode strings.

So what has this got to do with "pack"? Well, if you want to compose a Unicode string
(that is internally encoded as UTF-8), you can do so by using template code "U". As an
example, let's produce the Euro currency symbol (code number 0x20AC):

$UTF8{Euro} = pack( 'U', 0x20AC );
# Equivalent to: $UTF8{Euro} = "\x{20ac}";

Inspecting $UTF8{Euro} shows that it contains 3 bytes: "\xe2\x82\xac". However, it
contains only 1 character, number 0x20AC. The round trip can be completed with "unpack":

$Unicode{Euro} = unpack( 'U', $UTF8{Euro} );

Unpacking using the "U" template code also works on UTF-8 encoded byte strings.

Usually you'll want to pack or unpack UTF-8 strings:

# pack and unpack the Hebrew alphabet
my $alefbet = pack( 'U*', 0x05d0..0x05ea );
my @hebrew = unpack( 'U*', $utf );

Please note: in the general case, you're better off using Encode::decode_utf8 to decode a
UTF-8 encoded byte string to a Perl Unicode string, and Encode::encode_utf8 to encode a
Perl Unicode string to UTF-8 bytes. These functions provide means of handling invalid byte
sequences and generally have a friendlier interface.

Another Portable Binary Encoding
The pack code "w" has been added to support a portable binary data encoding scheme that
goes way beyond simple integers. (Details can be found at <http://Casbah.org/>, the Scarab
project.) A BER (Binary Encoded Representation) compressed unsigned integer stores base
128 digits, most significant digit first, with as few digits as possible. Bit eight (the
high bit) is set on each byte except the last. There is no size limit to BER encoding, but
Perl won't go to extremes.

my $berbuf = pack( 'w*', 1, 128, 128+1, 128*128+127 );

A hex dump of $berbuf, with spaces inserted at the right places, shows 01 8100 8101
81807F. Since the last byte is always less than 128, "unpack" knows where to stop.

Template Grouping


Prior to Perl 5.8, repetitions of templates had to be made by "x"-multiplication of
template strings. Now there is a better way as we may use the pack codes "(" and ")"
combined with a repeat count. The "unpack" template from the Stack Frame example can
simply be written like this:

unpack( 'v2 (vXXCC)5 v5', $frame )

Let's explore this feature a little more. We'll begin with the equivalent of

join( '', map( substr( $_, 0, 1 ), @str ) )

which returns a string consisting of the first character from each string. Using pack, we
can write

pack( '(A)'.@str, @str )

or, because a repeat count "*" means "repeat as often as required", simply

pack( '(A)*', @str )

(Note that the template "A*" would only have packed $str[0] in full length.)

To pack dates stored as triplets ( day, month, year ) in an array @dates into a sequence
of byte, byte, short integer we can write

$pd = pack( '(CCS)*', map( @$_, @dates ) );

To swap pairs of characters in a string (with even length) one could use several
techniques. First, let's use "x" and "X" to skip forward and back:

$s = pack( '(A)*', unpack( '(xAXXAx)*', $s ) );

We can also use "@" to jump to an offset, with 0 being the position where we were when the
last "(" was encountered:

$s = pack( '(A)*', unpack( '(@1A @0A @2)*', $s ) );

Finally, there is also an entirely different approach by unpacking big endian shorts and
packing them in the reverse byte order:

$s = pack( '(v)*', unpack( '(n)*', $s );

Lengths and Widths


String Lengths
In the previous section we've seen a network message that was constructed by prefixing the
binary message length to the actual message. You'll find that packing a length followed by
so many bytes of data is a frequently used recipe since appending a null byte won't work
if a null byte may be part of the data. Here is an example where both techniques are used:
after two null terminated strings with source and destination address, a Short Message (to
a mobile phone) is sent after a length byte:

my $msg = pack( 'Z*Z*CA*', $src, $dst, length( $sm ), $sm );

Unpacking this message can be done with the same template:

( $src, $dst, $len, $sm ) = unpack( 'Z*Z*CA*', $msg );

There's a subtle trap lurking in the offing: Adding another field after the Short Message
(in variable $sm) is all right when packing, but this cannot be unpacked naively:

# pack a message
my $msg = pack( 'Z*Z*CA*C', $src, $dst, length( $sm ), $sm, $prio );

# unpack fails - $prio remains undefined!
( $src, $dst, $len, $sm, $prio ) = unpack( 'Z*Z*CA*C', $msg );

The pack code "A*" gobbles up all remaining bytes, and $prio remains undefined! Before we
let disappointment dampen the morale: Perl's got the trump card to make this trick too,
just a little further up the sleeve. Watch this:

# pack a message: ASCIIZ, ASCIIZ, length/string, byte
my $msg = pack( 'Z* Z* C/A* C', $src, $dst, $sm, $prio );

# unpack
( $src, $dst, $sm, $prio ) = unpack( 'Z* Z* C/A* C', $msg );

Combining two pack codes with a slash ("/") associates them with a single value from the
argument list. In "pack", the length of the argument is taken and packed according to the
first code while the argument itself is added after being converted with the template code
after the slash. This saves us the trouble of inserting the "length" call, but it is in
"unpack" where we really score: The value of the length byte marks the end of the string
to be taken from the buffer. Since this combination doesn't make sense except when the
second pack code isn't "a*", "A*" or "Z*", Perl won't let you.

The pack code preceding "/" may be anything that's fit to represent a number: All the
numeric binary pack codes, and even text codes such as "A4" or "Z*":

# pack/unpack a string preceded by its length in ASCII
my $buf = pack( 'A4/A*', "Humpty-Dumpty" );
# unpack $buf: '13 Humpty-Dumpty'
my $txt = unpack( 'A4/A*', $buf );

"/" is not implemented in Perls before 5.6, so if your code is required to work on older
Perls you'll need to "unpack( 'Z* Z* C')" to get the length, then use it to make a new
unpack string. For example

# pack a message: ASCIIZ, ASCIIZ, length, string, byte
# (5.005 compatible)
my $msg = pack( 'Z* Z* C A* C', $src, $dst, length $sm, $sm, $prio );

# unpack
( undef, undef, $len) = unpack( 'Z* Z* C', $msg );
($src, $dst, $sm, $prio) = unpack ( "Z* Z* x A$len C", $msg );

But that second "unpack" is rushing ahead. It isn't using a simple literal string for the
template. So maybe we should introduce...

Dynamic Templates
So far, we've seen literals used as templates. If the list of pack items doesn't have
fixed length, an expression constructing the template is required (whenever, for some
reason, "()*" cannot be used). Here's an example: To store named string values in a way
that can be conveniently parsed by a C program, we create a sequence of names and null
terminated ASCII strings, with "=" between the name and the value, followed by an
additional delimiting null byte. Here's how:

my $env = pack( '(A*A*Z*)' . keys( %Env ) . 'C',
map( { ( $_, '=', $Env{$_} ) } keys( %Env ) ), 0 );

Let's examine the cogs of this byte mill, one by one. There's the "map" call, creating the
items we intend to stuff into the $env buffer: to each key (in $_) it adds the "="
separator and the hash entry value. Each triplet is packed with the template code
sequence "A*A*Z*" that is repeated according to the number of keys. (Yes, that's what the
"keys" function returns in scalar context.) To get the very last null byte, we add a 0 at
the end of the "pack" list, to be packed with "C". (Attentive readers may have noticed
that we could have omitted the 0.)

For the reverse operation, we'll have to determine the number of items in the buffer
before we can let "unpack" rip it apart:

my $n = $env =~ tr/\0// - 1;
my %env = map( split( /=/, $_ ), unpack( "(Z*)$n", $env ) );

The "tr" counts the null bytes. The "unpack" call returns a list of name-value pairs each
of which is taken apart in the "map" block.

Counting Repetitions
Rather than storing a sentinel at the end of a data item (or a list of items), we could
precede the data with a count. Again, we pack keys and values of a hash, preceding each
with an unsigned short length count, and up front we store the number of pairs:

my $env = pack( 'S(S/A* S/A*)*', scalar keys( %Env ), %Env );

This simplifies the reverse operation as the number of repetitions can be unpacked with
the "/" code:

my %env = unpack( 'S/(S/A* S/A*)', $env );

Note that this is one of the rare cases where you cannot use the same template for "pack"
and "unpack" because "pack" can't determine a repeat count for a "()"-group.

Intel HEX
Intel HEX is a file format for representing binary data, mostly for programming various
chips, as a text file. (See <http://en.wikipedia.org/wiki/.hex> for a detailed
description, and <http://en.wikipedia.org/wiki/SREC_(file_format)> for the Motorola
S-record format, which can be unravelled using the same technique.) Each line begins with
a colon (':') and is followed by a sequence of hexadecimal characters, specifying a byte
count n (8 bit), an address (16 bit, big endian), a record type (8 bit), n data bytes and
a checksum (8 bit) computed as the least significant byte of the two's complement sum of
the preceding bytes. Example: ":0300300002337A1E".

The first step of processing such a line is the conversion, to binary, of the hexadecimal
data, to obtain the four fields, while checking the checksum. No surprise here: we'll
start with a simple "pack" call to convert everything to binary:

my $binrec = pack( 'H*', substr( $hexrec, 1 ) );

The resulting byte sequence is most convenient for checking the checksum. Don't slow your
program down with a for loop adding the "ord" values of this string's bytes - the "unpack"
code "%" is the thing to use for computing the 8-bit sum of all bytes, which must be equal
to zero:

die unless unpack( "%8C*", $binrec ) == 0;

Finally, let's get those four fields. By now, you shouldn't have any problems with the
first three fields - but how can we use the byte count of the data in the first field as a
length for the data field? Here the codes "x" and "X" come to the rescue, as they permit
jumping back and forth in the string to unpack.

my( $addr, $type, $data ) = unpack( "x n C X4 C x3 /a", $bin );

Code "x" skips a byte, since we don't need the count yet. Code "n" takes care of the
16-bit big-endian integer address, and "C" unpacks the record type. Being at offset 4,
where the data begins, we need the count. "X4" brings us back to square one, which is the
byte at offset 0. Now we pick up the count, and zoom forth to offset 4, where we are now
fully furnished to extract the exact number of data bytes, leaving the trailing checksum
byte alone.

Packing and Unpacking C Structures


In previous sections we have seen how to pack numbers and character strings. If it were
not for a couple of snags we could conclude this section right away with the terse remark
that C structures don't contain anything else, and therefore you already know all there is
to it. Sorry, no: read on, please.

If you have to deal with a lot of C structures, and don't want to hack all your template
strings manually, you'll probably want to have a look at the CPAN module
"Convert::Binary::C". Not only can it parse your C source directly, but it also has built-
in support for all the odds and ends described further on in this section.

The Alignment Pit
In the consideration of speed against memory requirements the balance has been tilted in
favor of faster execution. This has influenced the way C compilers allocate memory for
structures: On architectures where a 16-bit or 32-bit operand can be moved faster between
places in memory, or to or from a CPU register, if it is aligned at an even or multiple-
of-four or even at a multiple-of eight address, a C compiler will give you this speed
benefit by stuffing extra bytes into structures. If you don't cross the C shoreline this
is not likely to cause you any grief (although you should care when you design large data
structures, or you want your code to be portable between architectures (you do want that,
don't you?)).

To see how this affects "pack" and "unpack", we'll compare these two C structures:

typedef struct {
char c1;
short s;
char c2;
long l;
} gappy_t;

typedef struct {
long l;
short s;
char c1;
char c2;
} dense_t;

Typically, a C compiler allocates 12 bytes to a "gappy_t" variable, but requires only 8
bytes for a "dense_t". After investigating this further, we can draw memory maps, showing
where the extra 4 bytes are hidden:

0 +4 +8 +12
+--+--+--+--+--+--+--+--+--+--+--+--+
|c1|xx| s |c2|xx|xx|xx| l | xx = fill byte
+--+--+--+--+--+--+--+--+--+--+--+--+
gappy_t

0 +4 +8
+--+--+--+--+--+--+--+--+
| l | h |c1|c2|
+--+--+--+--+--+--+--+--+
dense_t

And that's where the first quirk strikes: "pack" and "unpack" templates have to be stuffed
with "x" codes to get those extra fill bytes.

The natural question: "Why can't Perl compensate for the gaps?" warrants an answer. One
good reason is that C compilers might provide (non-ANSI) extensions permitting all sorts
of fancy control over the way structures are aligned, even at the level of an individual
structure field. And, if this were not enough, there is an insidious thing called "union"
where the amount of fill bytes cannot be derived from the alignment of the next item
alone.

OK, so let's bite the bullet. Here's one way to get the alignment right by inserting
template codes "x", which don't take a corresponding item from the list:

my $gappy = pack( 'cxs cxxx l!', $c1, $s, $c2, $l );

Note the "!" after "l": We want to make sure that we pack a long integer as it is compiled
by our C compiler. And even now, it will only work for the platforms where the compiler
aligns things as above. And somebody somewhere has a platform where it doesn't.
[Probably a Cray, where "short"s, "int"s and "long"s are all 8 bytes. :-)]

Counting bytes and watching alignments in lengthy structures is bound to be a drag. Isn't
there a way we can create the template with a simple program? Here's a C program that does
the trick:

#include <stdio.h>
#include <stddef.h>

typedef struct {
char fc1;
short fs;
char fc2;
long fl;
} gappy_t;

#define Pt(struct,field,tchar) \
printf( "@%d%s ", offsetof(struct,field), # tchar );

int main() {
Pt( gappy_t, fc1, c );
Pt( gappy_t, fs, s! );
Pt( gappy_t, fc2, c );
Pt( gappy_t, fl, l! );
printf( "\n" );
}

The output line can be used as a template in a "pack" or "unpack" call:

my $gappy = pack( '@0c @2s! @4c @8l!', $c1, $s, $c2, $l );

Gee, yet another template code - as if we hadn't plenty. But "@" saves our day by enabling
us to specify the offset from the beginning of the pack buffer to the next item: This is
just the value the "offsetof" macro (defined in "<stddef.h>") returns when given a
"struct" type and one of its field names ("member-designator" in C standardese).

Neither using offsets nor adding "x"'s to bridge the gaps is satisfactory. (Just imagine
what happens if the structure changes.) What we really need is a way of saying "skip as
many bytes as required to the next multiple of N". In fluent Templatese, you say this
with "x!N" where N is replaced by the appropriate value. Here's the next version of our
struct packaging:

my $gappy = pack( 'c x!2 s c x!4 l!', $c1, $s, $c2, $l );

That's certainly better, but we still have to know how long all the integers are, and
portability is far away. Rather than 2, for instance, we want to say "however long a short
is". But this can be done by enclosing the appropriate pack code in brackets: "[s]". So,
here's the very best we can do:

my $gappy = pack( 'c x![s] s c x![l!] l!', $c1, $s, $c2, $l );

Dealing with Endian-ness
Now, imagine that we want to pack the data for a machine with a different byte-order.
First, we'll have to figure out how big the data types on the target machine really are.
Let's assume that the longs are 32 bits wide and the shorts are 16 bits wide. You can then
rewrite the template as:

my $gappy = pack( 'c x![s] s c x![l] l', $c1, $s, $c2, $l );

If the target machine is little-endian, we could write:

my $gappy = pack( 'c x![s] s< c x![l] l<', $c1, $s, $c2, $l );

This forces the short and the long members to be little-endian, and is just fine if you
don't have too many struct members. But we could also use the byte-order modifier on a
group and write the following:

my $gappy = pack( '( c x![s] s c x![l] l )<', $c1, $s, $c2, $l );

This is not as short as before, but it makes it more obvious that we intend to have
little-endian byte-order for a whole group, not only for individual template codes. It can
also be more readable and easier to maintain.

Alignment, Take 2
I'm afraid that we're not quite through with the alignment catch yet. The hydra raises
another ugly head when you pack arrays of structures:

typedef struct {
short count;
char glyph;
} cell_t;

typedef cell_t buffer_t[BUFLEN];

Where's the catch? Padding is neither required before the first field "count", nor between
this and the next field "glyph", so why can't we simply pack like this:

# something goes wrong here:
pack( 's!a' x @buffer,
map{ ( $_->{count}, $_->{glyph} ) } @buffer );

This packs "3*@buffer" bytes, but it turns out that the size of "buffer_t" is four times
"BUFLEN"! The moral of the story is that the required alignment of a structure or array is
propagated to the next higher level where we have to consider padding at the end of each
component as well. Thus the correct template is:

pack( 's!ax' x @buffer,
map{ ( $_->{count}, $_->{glyph} ) } @buffer );

Alignment, Take 3
And even if you take all the above into account, ANSI still lets this:

typedef struct {
char foo[2];
} foo_t;

vary in size. The alignment constraint of the structure can be greater than any of its
elements. [And if you think that this doesn't affect anything common, dismember the next
cellphone that you see. Many have ARM cores, and the ARM structure rules make "sizeof
(foo_t)" == 4]

Pointers for How to Use Them
The title of this section indicates the second problem you may run into sooner or later
when you pack C structures. If the function you intend to call expects a, say, "void *"
value, you cannot simply take a reference to a Perl variable. (Although that value
certainly is a memory address, it's not the address where the variable's contents are
stored.)

Template code "P" promises to pack a "pointer to a fixed length string". Isn't this what
we want? Let's try:

# allocate some storage and pack a pointer to it
my $memory = "\x00" x $size;
my $memptr = pack( 'P', $memory );

But wait: doesn't "pack" just return a sequence of bytes? How can we pass this string of
bytes to some C code expecting a pointer which is, after all, nothing but a number? The
answer is simple: We have to obtain the numeric address from the bytes returned by "pack".

my $ptr = unpack( 'L!', $memptr );

Obviously this assumes that it is possible to typecast a pointer to an unsigned long and
vice versa, which frequently works but should not be taken as a universal law. - Now that
we have this pointer the next question is: How can we put it to good use? We need a call
to some C function where a pointer is expected. The read(2) system call comes to mind:

ssize_t read(int fd, void *buf, size_t count);

After reading perlfunc explaining how to use "syscall" we can write this Perl function
copying a file to standard output:

require 'syscall.ph'; # run h2ph to generate this file
sub cat($){
my $path = shift();
my $size = -s $path;
my $memory = "\x00" x $size; # allocate some memory
my $ptr = unpack( 'L', pack( 'P', $memory ) );
open( F, $path ) || die( "$path: cannot open ($!)\n" );
my $fd = fileno(F);
my $res = syscall( &SYS_read, fileno(F), $ptr, $size );
print $memory;
close( F );
}

This is neither a specimen of simplicity nor a paragon of portability but it illustrates
the point: We are able to sneak behind the scenes and access Perl's otherwise well-guarded
memory! (Important note: Perl's "syscall" does not require you to construct pointers in
this roundabout way. You simply pass a string variable, and Perl forwards the address.)

How does "unpack" with "P" work? Imagine some pointer in the buffer about to be unpacked:
If it isn't the null pointer (which will smartly produce the "undef" value) we have a
start address - but then what? Perl has no way of knowing how long this "fixed length
string" is, so it's up to you to specify the actual size as an explicit length after "P".

my $mem = "abcdefghijklmn";
print unpack( 'P5', pack( 'P', $mem ) ); # prints "abcde"

As a consequence, "pack" ignores any number or "*" after "P".

Now that we have seen "P" at work, we might as well give "p" a whirl. Why do we need a
second template code for packing pointers at all? The answer lies behind the simple fact
that an "unpack" with "p" promises a null-terminated string starting at the address taken
from the buffer, and that implies a length for the data item to be returned:

my $buf = pack( 'p', "abc\x00efhijklmn" );
print unpack( 'p', $buf ); # prints "abc"

Albeit this is apt to be confusing: As a consequence of the length being implied by the
string's length, a number after pack code "p" is a repeat count, not a length as after
"P".

Using "pack(..., $x)" with "P" or "p" to get the address where $x is actually stored must
be used with circumspection. Perl's internal machinery considers the relation between a
variable and that address as its very own private matter and doesn't really care that we
have obtained a copy. Therefore:

· Do not use "pack" with "p" or "P" to obtain the address of variable that's bound to go
out of scope (and thereby freeing its memory) before you are done with using the
memory at that address.

· Be very careful with Perl operations that change the value of the variable. Appending
something to the variable, for instance, might require reallocation of its storage,
leaving you with a pointer into no-man's land.

· Don't think that you can get the address of a Perl variable when it is stored as an
integer or double number! "pack('P', $x)" will force the variable's internal
representation to string, just as if you had written something like "$x .= ''".

It's safe, however, to P- or p-pack a string literal, because Perl simply allocates an
anonymous variable.

Pack Recipes


Here are a collection of (possibly) useful canned recipes for "pack" and "unpack":

# Convert IP address for socket functions
pack( "C4", split /\./, "123.4.5.6" );

# Count the bits in a chunk of memory (e.g. a select vector)
unpack( '%32b*', $mask );

# Determine the endianness of your system
$is_little_endian = unpack( 'c', pack( 's', 1 ) );
$is_big_endian = unpack( 'xc', pack( 's', 1 ) );

# Determine the number of bits in a native integer
$bits = unpack( '%32I!', ~0 );

# Prepare argument for the nanosleep system call
my $timespec = pack( 'L!L!', $secs, $nanosecs );

For a simple memory dump we unpack some bytes into just as many pairs of hex digits, and
use "map" to handle the traditional spacing - 16 bytes to a line:

my $i;
print map( ++$i % 16 ? "$_ " : "$_\n",
unpack( 'H2' x length( $mem ), $mem ) ),
length( $mem ) % 16 ? "\n" : '';

Funnies Section


# Pulling digits out of nowhere...
print unpack( 'C', pack( 'x' ) ),
unpack( '%B*', pack( 'A' ) ),
unpack( 'H', pack( 'A' ) ),
unpack( 'A', unpack( 'C', pack( 'A' ) ) ), "\n";

# One for the road ;-)
my $advice = pack( 'all u can in a van' );

Authors


Simon Cozens and Wolfgang Laun.

Use perlpacktut online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    Free Pascal Compiler
    Free Pascal Compiler
    A 32/64/16-bit Pascal compiler for
    Win32/64/CE, Linux, Mac OS X/iOS,
    Android, FreeBSD, OS/2, Game Boy
    Advance, Nintendo NDS and DOS;
    semantically compatible wi...
    Download Free Pascal Compiler
  • 2
    Canon EOS DIGITAL Info
    Canon EOS DIGITAL Info
    Canon doesn�t have shutter count
    included on the EXIF information of an
    image file, as opposed to Nikon and
    Pentax. There�s no official Canon based
    application ...
    Download Canon EOS DIGITAL Info
  • 3
    rEFInd
    rEFInd
    rEFInd is a fork of the rEFIt boot
    manager. Like rEFIt, rEFInd can
    auto-detect your installed EFI boot
    loaders and it presents a pretty GUI
    menu of boot option...
    Download rEFInd
  • 4
    ExpressLuke GSI
    ExpressLuke GSI
    This SourceForge download page was to
    grant users to download my source built
    GSIs, based upon phhusson's great
    work. I build both Android Pie and
    Android 1...
    Download ExpressLuke GSI
  • 5
    Music Caster
    Music Caster
    Music Caster is a tray music player
    that lets you cast your local music to a
    Google Cast device. On the first run,
    you will need to click the arrow in your
    tas...
    Download Music Caster
  • 6
    PyQt
    PyQt
    PyQt is the Python bindings for
    Digia's Qt cross-platform
    application development framework. It
    supports Python v2 and v3 and Qt v4 and
    Qt v5. PyQt is avail...
    Download PyQt
  • More »

Linux commands

  • 1
    4ti2-circuits
    4ti2-circuits
    4ti2 - software package for algebraic,
    geometric and combinatorial problems on
    linear spaces ...
    Run 4ti2-circuits
  • 2
    4ti2-genmodel
    4ti2-genmodel
    4ti2 - software package for algebraic,
    geometric and combinatorial problems on
    linear spaces ...
    Run 4ti2-genmodel
  • 3
    coriander
    coriander
    coriander - control and display dc1394
    camera images ...
    Run coriander
  • 4
    corkscrew
    corkscrew
    corkscrew - Tunnel TCP connections
    through HTTP proxies ...
    Run corkscrew
  • 5
    g.gisenvgrass
    g.gisenvgrass
    g.gisenv - Outputs and modifies the
    user�s current GRASS variable settings.
    Prints all defined GRASS variables if no
    option is given. KEYWORDS: general,
    settin...
    Run g.gisenvgrass
  • 6
    g.guigrass
    g.guigrass
    g.gui - Launches a GRASS graphical user
    interface (GUI) session. Optionally
    updates default user interface settings.
    KEYWORDS: general, GUI, user interface ...
    Run g.guigrass
  • More »

Ad