This is the command scantool that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator
PROGRAM:
NAME
scantool - ODB-II vehicle diagnostic scanner
SYNOPSIS
scantool
DESCRIPTION
This manual page documents briefly the scantool program.
scantool is a program that communicates with an ODB-II serial device that converts CAN-bus
to RS-232. Since the application was originally written for DOS, the internal
configuration refers to COM1, COM2, etc. As a work-around under Linux, selecting COM1
will attempt to open /dev/ttyUSB0 then /dev/ttyS0, and COM2 will attempt /dev/ttyUSB1 then
/dev/ttyS1, etc. When connecting to a vehicle ODB-II system, the correct baud rate will
need to be manually selected via trial-and-error.
OPTIONS
There are no command line options; all settings are configured within the GUI.
Use scantool online using onworks.net services
