EnglishFrenchSpanish

Ad


OnWorks favicon

ccat - Online in the Cloud

Run ccat in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command ccat that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


ccrypt - encrypt and decrypt files and streams

SYNOPSIS


ccrypt [mode] [options] [file...]
ccencrypt [options] [file...]
ccdecrypt [options] [file...]
ccat [options] file...

DESCRIPTION


ccrypt is a utility for encrypting and decrypting files and streams. It was designed to
replace the standard unix crypt utility, which is notorious for using a very weak
encryption algorithm. ccrypt is based on the Rijndael block cipher, a version of which
was also chosen by the U.S. government as the Advanced Encryption Standard (AES, see
http://www.nist.gov/aes). This cipher is believed to provide very strong cryptographic
security.

Unlike unix crypt, the algorithm provided by ccrypt is not symmetric, i.e., one must
specify whether to encrypt or decrypt. The most common way to invoke ccrypt is via the
commands ccencrypt and ccdecrypt.

Encryption and decryption depends on a keyword (or key phrase) supplied by the user. By
default, the user is prompted to enter a keyword from the terminal. Keywords can consist
of any number of characters, and all characters are significant (although ccrypt
internally hashes the key to 256 bits). Longer keywords provide better security than short
ones, since they are less likely to be discovered by exhaustive search.

MODES


ccrypt can operate in five different modes. If more than one mode is specified, the last
one specified takes precedence. The aliases ccencrypt, ccdecrypt, and ccat are provided as
a convenience; they are equivalent to ccrypt -e, ccrypt -d, and ccrypt -c, respectively.

-e, --encrypt Encrypt. This is the default mode. If filename arguments are given, encrypt
the files and append the suffix .cpt to their names. Otherwise, run as a
filter.

-d, --decrypt Decrypt. If filename arguments are given, decrypt the files and strip the
suffix .cpt from the filenames, if present. Otherwise, run as a filter.

-c, --cat Decrypt one or more files to standard output. If no filename arguments are
given, decrypt as a filter. Implies -l.

-x, --keychange
Change the key of encrypted data. In this mode, ccrypt prompts for two
passwords: the old one and the new one. If filename arguments are given,
modify the files. Otherwise, run as a filter.

-u, --unixcrypt
Simulate the old unix crypt command. Note: the cipher used by unix crypt
has been broken and is not secure. Please use this option only to decrypt
existing files. If filename arguments are given, decrypt the files to
stdout. Otherwise, run as a filter. Note that for the unix crypt format,
there is no easy way to detect whether a given key matches or not; thus,
for safety, this mode does not overwrite files.

OPTIONS


The following options are supported in addition to the modes described above:

-b, --brave When reading an encryption key from the terminal, ask the user only once
for the key. By default, ccrypt will ask the user to enter such keys twice,
as a safeguard against accidentally destroying data due to a mistyped key.
Using the --brave option disables this safety check. Never use it, unless
you know what you are doing. See also --timid.

-E var, --envvar var
Read the keyword from the environment variable var. Note that this might
be unsafe on certain systems, namely where users can use the ps command to
see the environment of a process owner by another user. On most modern
systems, however, such behavior of ps is disabled and the -E option should
be safe there. Also, as an added security measure, ccrypt erases the
keyword from its environment immediately after reading it.

-f, --force Overwrite existing files or operate on write-protected files without asking
any questions. Also, override ccrypt's reluctance to write or read
encrypted data to or from a terminal.

-F var, --envvar2 var
Same as -E, except for second keyword (in keychange mode).

-h, --help Help. Print usage information and exit.

-H key, --key2 key
Same as -K, except for second keyword (in keychange mode).

-k file, --keyfile file
Read the keyword as the first line from the named file. In keychange mode,
two keywords are read as the first two lines of the file. The filename "-"
may be given for reading keywords from standard input. Using the -k -
option and sending the keyword on stdin is probably the safest way to pass
a keyword to ccrypt from another program or script.

-K key, --key key
Specify the keyword on the command line. This is unsafe, because any other
user can see the command line by running the ps command. Only use this
option for testing purposes, and never with a real keyword.

-y file, --keyref file
In encryption or keychange mode, check the encryption key against the named
file, which must have been previously encrypted with the same key. Exit
with an error message if the key does not match. This option is useful as
an alternative to --timid, to guard against mistyped keys in situations
where several files are encrypted with the same key. This option implies
--brave, unless the --timid option is explicitly given after the --keyref
option.

-l, --symlinks Force encryption/decryption of symbolic links. By default, symbolic links
are ignored except in cat or unixcrypt mode. Note that with the -l option,
encryption/decryption of a symbolic link causes the suffix .cpt to be
added/removed from the name of the link, not the name of the file pointed
to.

-L, --license Print license info and exit.

-m, --mismatch Normally, ccrypt refuses to decrypt data with a key that does not seem to
match. The -m option overrides this restriction. This can sometimes be
useful in recovering data from a corrupted file (see RECOVERING DATA FROM
CORRUPTED FILES). To avoid irretrievable loss of data when decrypting with
a wrong key, this option cannot be used with modes that overwrite the input
file.

-P prompt, --prompt prompt
Use prompt instead of the default prompt "Enter encryption/decryption key:
". This may be useful in some shell scripts.

-q, --quiet Suppress most warnings.

-Q prompt, --prompt2 prompt
Same as -P, except for second keyword (in keychange mode).

-r, --recursive
Traverse subdirectories recursively.

-R, --rec-symlinks
Traverse subdirectories recursively, and also follow symbolic links to
subdirectories.

-s, --strictsuffix
Refuse to encrypt files that already have the .cpt suffix (or that selected
with -S). This can be useful when adding some files to a directory of
already encrypted files. This option has no effect in decryption or
keychange mode.

-S .suf, --suffix .suf
Use the suffix .suf instead of the default suffix .cpt.

-t, --timid When reading an encryption key from the terminal, ask the user to enter the
key twice. If the two entered keys are not identical, abort. This is a
safeguard against accidentally destroying data by encrypting it with a
mistyped key. Note: this behavior is now the default, and can be overridden
with the --brave option.

-T, --tmpfiles This option causes ccrypt to use temporary files during
encryption/decryption, rather than overwriting the file contents
destructively. This method leaves the original file contents lying around
in unused sectors of the file system, and thus is less secure than the
default behavior. However, in situations where this loss of security is not
important, the --tmpfiles option can provide a measure of protection
against data being corrupted due to a system crash in the middle of
overwriting a file.

-v, --verbose Print progress information to stderr.

-V, --version Print version info and exit.

-- End of options. Any remaining arguments are interpreted as filenames. This
also turns off filter mode, even if zero filenames follow. This might be
useful in the context of shell pattern expansion; ccrypt -- * will behave
correctly even if no files match the pattern *.

NOTES ON USAGE


The user interface of ccrypt intentionally resembles that of GNU gzip, although it is not
identical. When invoked with filename arguments, ccrypt normally modifies the files in
place, overwriting their old content. Unlike gzip, the output is not first written to a
temporary file; instead, the data is literally overwritten. For encryption, this is
usually the desired behavior, since one does not want copies of the unencrypted data to
remain in hidden places in the file system. The disadvantage is that if ccrypt is
interrupted in the middle of writing to a file, the file will end up in a corrupted,
partially encrypted state. However, in such cases it is possible to recover most of the
data; see RECOVERING DATA FROM CORRUPTED FILES below. If you want to force ccrypt to use
temporary files, use the --tmpfiles option.

When ccrypt receives an interrupt signal (Ctrl-C) while updating a file in place, it does
not exit immediately, but rather delays the exit until after it finishes writing to the
current file. This is to prevent files from being partially overwritten and thus
corrupted. If you want to force ccrypt to exit immediately, just press Ctrl-C twice
quickly.

The encryption algorithm used by ccrypt uses a random seed that is different each time. As
a result, encrypting the same file twice will never yield the same result. The advantage
of this method is that similarities in plaintext do not lead to similarities in
ciphertext; there is no way of telling whether the content of two encrypted files is
similar or not.

Because of the use of a random seed, decrypting and re-encrypting a file with the same key
will not lead to an identical file. It is primarily for this reason that ccrypt refuses to
decrypt files with a non-matching key; if this were allowed, there would be no way
afterwards to restore the original file, and the data would be irretrievably lost.

When overwriting files, special care is taken with hard links and symbolic links. Each
physical file (i.e., each inode) is processed at most once, no matter how many paths to it
are encountered on the command line or in subdirectories traversed recursively. For each
file that has multiple hard links, a warning is printed, to alert the user that not all
paths to the file might have been properly renamed. Symbolic links are ignored except in
cat mode, or unless the -l or -R option is given.

Unlike gzip, ccrypt does not complain about files that have improper suffixes. It is legal
to doubly encrypt a file. It is also legal to decrypt a file that does not have the .cpt
suffix, provided the file contains valid data for the given decryption key. Use the
--strictsuffix option if you want to prevent ccrypt from encrypting files that already
have a .cpt suffix.

Regarding encryption and compression: encrypted data is statistically indistinguishable
from random data, and thus it cannot be compressed. But of course it is possible to
compress the data first, then encrypt it. Suggested file suffixes are .gz.cpt or .gzc.

RECOVERING DATA FROM CORRUPTED FILES


Encrypted data might be corrupted for a number of reasons. For instance, a file might have
been partially encrypted or decrypted if ccrypt was interrupted while processing the file.
Or data might be corrupted by a software or hardware error, or during transmission over a
network. The encryption algorithm used by ccrypt is designed to allow recovery from
errors. In general, only a few bytes of data will be lost near where the error occurred.

Data encrypted by ccrypt can be thought of as a sequence of 32-byte blocks. To decrypt a
particular block, ccrypt only needs to know the decryption key, the data of the block
itself, and the data of the block immediately preceding it. ccrypt cannot tell whether a
block is corrupted or not, except the very first block, which is special. Thus, if the
encrypted data has been altered in the middle or near the end of a file, ccrypt can be run
to decrypt it as usual, and most of the data will be decrypted correctly, except near
where the corruption occurred.

The very first block of encrypted data is special, because it does not actually correspond
to any plaintext data; this block holds the random seed generated at encryption time.
ccrypt also uses the very first block to decide whether the given keyword matches the data
or not. If the first block has been corrupted, ccrypt will likely decide that the keyword
does not match; in such cases, the -m option can be used to force ccrypt to decrypt the
data anyway.

If a file contains some encrypted and some unencrypted data, or data encrypted with two
different keys, one should decrypt the entire file with each applicable key, and then
piece together the meaningful parts manually.

Finally, decryption will only produce meaningful results if the data is aligned correctly
along block boundaries. If the block boundary information has been lost, one has to try
all 32 possibilities.

DESCRIPTION OF THE CIPHER


Block ciphers operate on data segments of a fixed length. For instance, the Rijndael
block cipher used in ccrypt has a block length of 32 bytes or 256 bits. Thus, this cipher
encrypts 32 bytes at a time.

Stream ciphers operate on data streams of any length. There are several standard modes for
operating a block cipher as a stream cipher. One such standard is Cipher Feedback (CFB),
defined in NIST Special Publication 800-38A and ANSI X3.106-1983. ccrypt implements a
stream cipher by operating the Rijndael block cipher in CFB mode.

Let P[i] and C[i] be the ith block of the plaintext and ciphertext, respectively. CFB mode
specifies that

C[i] = P[i] ^ E(k,C[i-1])

Here ^ denotes the bitwise exclusive or function, and E(k,x) denotes the encryption of the
block x under the key k using the block cipher. Thus, each block of the ciphertext is
calculated from the corresponding block of plaintext and the previous block of ciphertext.
Note that in fact, each byte of P[i] can be calculated from the corresponding byte of
C[i], so that the stream cipher can be applied to one byte at a time. In particular, the
stream length need not be a multiple of the block size.

Assuming that blocks are numbered starting from 0, a special "initial" ciphertext block
C[-1] is needed to provide the base case for the above formula. This value C[-1] is called
the initialization vector or seed. The seed is chosen at encryption time and written as
the first block of the encrypted stream. It is important that the seed is unpredictable;
in particular, the same seed should never by used more than once. Otherwise, the two
resulting ciphertext blocks C[0] could be related by a simple xor to obtain information
about the corresponding plaintext blocks P[0]. If unpredictable seeds are used, CFB is
provably as secure as the underlying block cipher.

In ccrypt, the seed is constructed as follows: first, a nonce is contructed by hashing a
combination of the host name, current time, process id, and an internal counter into a
28-byte value, using a cryptographic hash function. The nonce is combined with a fixed
four-byte "magic number", and the resulting 32-byte value is encrypted by one round of the
Rijndael block cipher with the given key. This encrypted block is used as the seed and
appended to the beginning of the ciphertext. The use of the magic number allows ccrypt to
detect non-matching keys before decryption.

SECURITY


ccrypt is believed to provide very strong cryptographic security, equivalent to that of
the Rijndael cipher with 256-bit block size and 256-bit key size. Another version of the
Rijndael cipher (with a smaller block size) is used in the U.S. government's Advanced
Encryption Standard (AES, see http://www.nist.gov/aes). Therefore, this cipher is very
well studied and subject to intensive public scrutiny. This scrutiny has a positive
effect on the cipher's security. In particular, if an exploitable weakness in this cipher
were ever discovered, this would become widely publicized.

In practical terms, the security of ccrypt means that, without knowledge of the encryption
key, it is effectively impossible to obtain any information about the plaintext from a
given ciphertext. This is true even if a large number of plaintext-ciphertext pairs are
already known for the same key. Moreover, because ccrypt uses a key size of 256 bits, an
exhaustive search of the key space is not feasible, at least as long as sufficiently long
keys are actually used in practice. No cipher is secure if users choose insecure keywords.

On the other hand, ccrypt does not attempt to provide data integrity, i.e., it will not
attempt to detect whether the ciphertext was modified after encryption. In particular,
encrypted data can be truncated, leaving the corresponding decrypted data also truncated,
but otherwise consistent. If one needs to ensure data integrity as well as secrecy, this
can be achieved by other methods. The recommended method is to prepend a cryptographic
hash (for instance, an SHA-1 hash) to the data before encryption.

ccrypt does not claim to provide any particular safeguards against information leaking via
the local operating system. While reasonable precautions are taken, there is no guarantee
that keywords and plaintexts have been physically erased after encryption in completed;
parts of such data might still exist in memory or on disk. ccrypt does not currently use
privileged memory pages.

When encrypting files, ccrypt by default accesses them in read-write mode. This normally
causes the original file to be physically overwritten, but on some file systems, this
might not be the case.

Note that the use of the -K option is unsafe in a multiuser environment, because the
command line of a process is visible to other users running the ps command. The use of the
-E option is potentially unsafe for the same reason, although recent versions of ps don't
tend to display environment information to other users. The use of the -T option is
unsafe for encryption because the original plaintext will remain in unused sectors of the
file system.

EMACS PACKAGE


There is an emacs package for reading and writing encrypted files. (Note that this
package currently only works with emacs, not with xemacs.) This package hooks into the
low-level file I/O functions of emacs, prompting the user for a password where
appropriate. It is implemented in much the same way as support for compressed files. If
you have both the ps-ccrypt and jka-compr packages installed, emacs can open encrypted
files and compressed files; however, it does not currently work for files that are
encrypted and compressed.

To use the package, simply load ps-ccrypt, then edit as usual. When you open a file with
the ".cpt" extension, emacs will prompt you for a password for the file. It will remember
the password for the buffer, and when you save the file later, it will be automatically
encrypted again (provided you save it with a ".cpt" extension). Except for the password
prompt, the operation of the package should be transparent to the user. The command M-x
ccrypt-set-buffer-password can be used to change the current password of a buffer.

The simplest way to use this package is to include the lines

(setq load-path (cons "path" load-path))
(require 'ps-ccrypt "ps-ccrypt.el")

in your .emacs file, where path is the directory that holds the file ps-ccrypt.el.

Limitations of the emacs package: there is no guarantee that unencrypted information
cannot leak to the file system; in fact, the package sometimes writes unencrypted data to
temporary files. However, auto-saved files are normally treated correctly (i.e.,
encrypted). For details, see the comments in the file ps-ccrypt.el.

EXIT STATUS


The exit status is 0 on successful completion, and non-zero otherwise. An exit status of
1 means illegal command line, 2 is out of memory or another system error, 3 is a fatal i/o
error, 4 is a non-matching key or wrong file format, 6 is interrupt, 7 is mistyped key in
--timid mode, 8 is a non-fatal i/o error, and 9 means that no key was obtained because the
user failed to enter it, or because the specified keyfile or environment variable could
not be read. An exit status of 10 means that the file specified by the --keyref option
could not be read, or did not match the requested encryption key.

Fatal i/o errors are those that occur while processing a file that is already open. Such
errors cause ccrypt to abort its operation immediately with an exit status of 3. Non-fatal
i/o errors are those that occur while handling files that are not already open; typically,
such errors are caused by files that are missing, not readable, or can't be created. When
encountering a non-fatal i/o error, ccrypt simply continues to process the next available
input file. The exit status of 8 is delayed until after all the files have been processed.

Non-matching keys and wrong file formats are also considered non-fatal errors, and cause
ccrypt to continue with processing the next available input file. In this case, an exit
status of 4 is given after all the files have been processed. If there is a conflict
between exit status 4 and 8, then 8 is returned.

The former exit status 5 ("wrong file format") has been eliminated, and is now covered
under exit status 4 ("non-matching key or wrong file format"). Note that ccrypt does not
really have a "file format" in the proper sense of the word; any file of length at least
32 bytes is potentially a valid encrypted file.

Use ccat online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    OpenFOAM
    OpenFOAM
    OpenFOAM - The Open Source CFD Toolbox.
    OpenFOAM is a generic, programmable
    software tool for Computational Fluid
    Dynamics (CFD). For more information,
    see: - ...
    Download OpenFOAM
  • 2
    PostInstallerF
    PostInstallerF
    PostInstallerF will install all the
    software that Fedora Linux and others
    doesn't include by default, after
    running Fedora for the first time. Its
    easy for...
    Download PostInstallerF
  • 3
    strace
    strace
    The strace project has been moved to
    https://strace.io. strace is a
    diagnostic, debugging and instructional
    userspace tracer for Linux. It is used
    to monitor a...
    Download strace
  • 4
    JasperReports Library
    JasperReports Library
    JasperReports Library is the
    world's most popular open source
    business intelligence and reporting
    engine. It is entirely written in Java
    and it is able to ...
    Download JasperReports Library
  • 5
    Numerical Python
    Numerical Python
    NEWS: NumPy 1.11.2 is the last release
    that will be made on sourceforge. Wheels
    for Windows, Mac, and Linux as well as
    archived source distributions can be fou...
    Download Numerical Python
  • 6
    CMU Sphinx
    CMU Sphinx
    CMUSphinx is a speaker-independent large
    vocabulary continuous speech recognizer
    released under BSD style license. It is
    also a collection of open source tools ...
    Download CMU Sphinx
  • 7
    Old Feren OS Repositories
    Old Feren OS Repositories
    This was the Official Repository for
    Feren OS. To add the latest one, run
    this command: (16.04-based) echo
    "deb ...
    Download Old Feren OS Repositories
  • More »

Linux commands

Ad