EnglishFrenchSpanish

OnWorks favicon

reformime - Online in the Cloud

Run reformime in OnWorks free hosting provider over Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

This is the command reformime that can be run in the OnWorks free hosting provider using one of our multiple free online workstations such as Ubuntu Online, Fedora Online, Windows online emulator or MAC OS online emulator

PROGRAM:

NAME


reformime - MIME E-mail reformatting tool

SYNOPSIS


reformime [options...]

DESCRIPTION


reformime is a utility for reformatting MIME messages.

Generally, reformime expects to see an RFC 2045[1] compliant message on standard input,
except in few cases such as the -m option.

If no options are given, reformime prints the MIME structure of the message. The output
consists of so-called "MIME reference tags", one per line. For example:

1
1.1
1.2

This shows that the message contains two different MIME sections. The first line of the
MIME structure output will always contain "1", which refers to the entire message. In this
case it happens to be a multipart/mixed message. "1.1" refers to the first section of the
multipart message, which happens to be a text/plain section. "1.2" refers to the second
section of the message, which happens to be an application/octet-stream section.

If the message is not a MIME message, or it does not contain any attachments, reformime
prints only "1", that refers to the entire message itself:

1

Here's the output from reformime when the first part of the message was itself a
multipart/alternative section:

1
1.1
1.1.1
1.1.2
1.2

Arbitrarily complex MIME constructs are possible.

OPTIONS


-d
Parse a delivery status notification MIME message (RFC 1894[2]). reformime expects to
see on standard input a MIME message that consists of a delivery status notification,
as defined by RFC 1894. reformime reads the message and prints on standard output a
list of addresses and their corresponding delivery status, as specified in the
delivery status notification. Each line printed by reformime consists of a delivery
status, a space, and the address. reformime then terminates with a 0 exit status.
reformime produces no output and terminates with an exit status of 1 if the standard
input does not contain a delivery status notification.

-D
Like the -d except that reformime lists the address found in the Original-Recipient:
header, if it exists.

-e
Extract the contents of the indicated MIME section, and display it on standard output.
The -s option is required when -e is specified. If the specified section or sections
use either the base64 or quoted-printable encoding method, reformime automatically
decodes it. In this case you're better off redirecting the standard output into a
file.

-i
Display MIME information for each section. reformime displays the contents of the
Content-Type: header, any encoding used, and the character set. reformime also
displays the byte offset in the message where each section starts and ends (and where
the actual contents of the section start, after skipping all the headers).

-m
Create a multipart/digest MIME message digest.

-r
Rewrite message, adding or standardizing RFC 2045[1] MIME headers.

-r7
Like -r but also convert 8bit-encoded MIME sections to quoted-printable.

-r8
Like -r but also convert quoted-printable-encoded MIME sections to 8bit.

-s section
Display MIME information for this section only. section is a MIME specification tag.
The -s option is required if -e is also specified, and is optional with -i.

Multiple sections may be specified by separating them with commas. reformime
processes each section using the other options that were specified.

-x
Extract the contents of the indicated MIME section to a file.

-X
Pipe the contents of the indicated MIME section to a program.

Extracting RFC 2045 MIME section(s) to file(s)
The -x and -X options extract a specific MIME section to a file or to a pipe to an
external program. Use the -s option to identify the MIME section to extract. If the -s
option is not specified, every MIME section in the message is extracted, one at a time. If
-s lists multiple sections, each section gets extracted separately. quoted-printable and
base64 encoding are automatically decoded.

-x
Interactive extraction. reformime prints the MIME content type of each section.
Answer with 'y' or 'Y' to extract the MIME section. Specify the filename at the next
prompt. reformime prompts with a default filename. reformime tries to choose the
default filename based on the MIME headers, if possible. If not, the default filename
will be attachment1.dat (if the -s option is not specified, the next filename will be
attachment2.dat, and so on).

-xPREFIX
Automatic extraction. reformime automatically extracts one or more MIME sections, and
saves them to a file. The filename is formed by taking PREFIX, and appending the
default filename to it. Note that there's no space between "-x" and "PREFIX". For
example:

reformime -xfiles-
This command saves MIME sections as files-attachment1.dat, then files-attachment2.dat,
etc. reformime tries to append the filename specified in the MIME headers for each
section, where possible. reformime replaces all suspect characters with the
underscore character.

-X prog arg1 arg2 ...
The -X option must be the last option to reformime. reformime runs an external
program prog, and pipes the contents of the MIME section to the program. reformime
sets the environment variable CONTENT_TYPE to the MIME content type. The environment
variable FILENAME gets set to the default filename of reformime's liking. If the -s
option is not specified, the program runs once for every MIME section in the message.
The external program, prog must terminate with a zero exit status in order for
reformime to proceed to the next MIME section in the message (or the next section
specified by -s). In any case, if prog terminates with a non-zero exit status,
reformime terminates with the exit status of 20 plus prog's exit status.

Note
reformime extracts every MIME section in the message unless the -s option is
specified. This includes even the text/plain MIME content that usually precedes a
binary attachment.

Adding RFC 2045 MIME headers
The -r option performs the following actions:

If there is no Mime-Version:, Content-Type:, or Content-Transfer-Encoding: header,
reformime adds one.

If the Content-Transfer-Encoding: header contains 8bit or raw, but only seven-bit data is
found, reformime changes the Content-Transfer-Encoding header to 7bit.

-r7 does the same thing, but also converts 8bit-encoded content that contains eight-bit
characters to quoted-printable encoding.

-r8 does the same thing, but also converts quoted-printable-encoded content to 8bit,
except in some situations.

Creating multipart/digest MIME digests
The -m option creates a MIME digest. reformime reads a list of filenames on standard
input. Each line read from standard input contains the name of a file that is presumed to
contain an RFC 2822-formatted message. reformime splices all files into a
multipart/digest MIME section, and writes it to standard output.

Translating MIME headers
The following options do not read a message from standard input. These options process
MIME headers via the command line, and are designed to be conveniently used by
mail-handling scripts.

-h "header"
Decode a MIME-encoded "header" and print the decoded 8-bit content on standard output.
The decoding gets carried out as if the contents occurred in the “Subject” header.
Example:

$ reformime -h '=?iso-8859-1?Q?H=F3la!?='
Hóla!

-H "header"
Like -h except that header is parsed as a list of email addresses, like “From” or
“To”.

-o "text"
MIME-encode "text", and print the results on standard output.

-O "text"
Like the -o option, except that text is a structured header with RFC 2822 addresses.

-c "charset"
Use charset as the character set setting, by the -h, -H, -o and -O options.

-u
This “undocumented” option reads a MIME message on standard input, and converts its
contents to an UTF-8-encoded character stream, which is written to standard output.

The standard output receives a concatenated amalgam of the headers and “text” MIME
object data. It is meant to be used as part of a generic search function. This option
decodes various kinds of header MIME encoding, the quoted-printable and base64
transfer encodings of “text” MIME objects.

Use reformime online using onworks.net services


Free Servers & Workstations

Download Windows & Linux apps

  • 1
    Eclipse Tomcat Plugin
    Eclipse Tomcat Plugin
    The Eclipse Tomcat Plugin provides
    simple integration of a tomcat servlet
    container for the development of java
    web applications. You can join us for
    discussio...
    Download Eclipse Tomcat Plugin
  • 2
    WebTorrent Desktop
    WebTorrent Desktop
    WebTorrent Desktop is for streaming
    torrents on Mac, Windows or Linux. It
    connects to both BitTorrent and
    WebTorrent peers. Now there's no
    need to wait for...
    Download WebTorrent Desktop
  • 3
    GenX
    GenX
    GenX is a scientific program to refine
    x-ray refelcetivity, neutron
    reflectivity and surface x-ray
    diffraction data using the differential
    evolution algorithm....
    Download GenX
  • 4
    pspp4windows
    pspp4windows
    PSPP is a program for statistical
    analysis of sampled data. It is a free
    replacement for the proprietary program
    SPSS. PSPP has both text-based and
    graphical us...
    Download pspp4windows
  • 5
    Git Extensions
    Git Extensions
    Git Extensions is a standalone UI tool
    for managing Git repositories. It also
    integrates with Windows Explorer and
    Microsoft Visual Studio
    (2015/2017/2019). Th...
    Download Git Extensions
  • 6
    eSpeak: speech synthesis
    eSpeak: speech synthesis
    Text to Speech engine for English and
    many other languages. Compact size with
    clear but artificial pronunciation.
    Available as a command-line program with
    many ...
    Download eSpeak: speech synthesis
  • More »

Linux commands

Ad