Documentation< Previous | Contents | Next >
ip
The ip program is a multi-purpose network configuration tool that makes use of the full range networking features available in modern Linux kernels. It replaces the earlier and now deprecated ifconfig program. With ip, we can examine a system's network in- terfaces and routing table.
[me@linuxbox ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether ac:22:0b:52:cf:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.14/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever
inet6 fe80::ae22:bff:fe52:cf84/64 scope link valid_lft forever preferred_lft forever
[me@linuxbox ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether ac:22:0b:52:cf:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.14/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever
inet6 fe80::ae22:bff:fe52:cf84/64 scope link valid_lft forever preferred_lft forever
In the example above, we see that our test system has two network interfaces. The first,
called lo, is the loopback interface, a virtual interface that the system uses to “talk to it- self” and the second, called eth0, is the Ethernet interface.
When performing causal network diagnostics, the important things to look for are the presence of the word “UP” in the first line for each interface, indicating that the network interface is enabled, and the presence of a valid IP address in the inet field on the third line. For systems using DHCP (Dynamic Host Configuration Protocol), a valid IP address in this field will verify that the DHCP is working.