Juno Installation from the Ubuntu Installation Guide by OnWorks

Bỏ để qua phần nội dung

Juno has UEFI so the install is straightforward. The most practical method is installing from USB stick. You need up to date firmware for USB-booting to work. Builds from http://releases.linaro.org/latest/members/arm/ after March 2015 tested OK. Consult Juno documentation on firmware updating.

Prepare a standard arm64 CD image on a USB stick. Insert it in one of the USB ports on the back. Plug a serial cable into the upper 9-pin serial port on the back. If you need networking (netboot image) plug the ethernet cable into the socket on the front of the machine.

Run a serial console at 115200, 8bit no parity, and boot the Juno. It should boot from the USB stick to a GRUB menu. The console config is not correctly detected on Juno so just hitting return will show no kernel output. Set the console to

console = ttyAMA0,115200n8

as described in (Section 5.1.1). Control-x to boot should show you the trình cài đặt debian screens, and allow you to proceed with a standard installation.